Poly(Urethane)-Crosslinked Poly(HEMA) Hydrogels

Abstract

Hydrogels have been prepared from 2-hydroxyethyl methacrylate polymerized in the presence of isocyanate-terminated poly(ethylene glycol) (PEG) crosslinking agents. PEGS of molecular weights 200, 400, and 1000 were investigated. The crosslinked nature of the hydrogels was demonstrated by their insolubility in solvents which normally dissolve poly(HEMA). Hexamethylene diisocyanate (HDI) was mainly used as the isocyanate. The molecular weight of the PEG and the crosslinker content significantly influenced the equilibrium water sorption and mechanical properties of the saturated networks. It was observed that as the molecular weight of the PEG increased, the water sorption increased and the nominal modulus decreased. However, for higher levels of cross-linker, water sorption decreased and modulus increased at low molecular weight PEG; for PEG 1000, water absorption increased as crosslinker content increased. These results are explained by the competing effects of flexibility, crosslink density, and hydrophobicity contributed by the various constituents of the hydrogels.     

Functional Properties and Molecular Degradation of Schizostachyum Brachycladum Bamboo Cellulose Nanofibre in PLA-Chitosan Bionanocomposites

The degradation and mechanical properties of potential polymeric materials used for green manufacturing are significant determinants. In this study, cellulose nanofibre was prepared from Schizostachyum brachycladum bamboo and used as reinforcement in the PLA/chitosan matrix using melt extrusion and compression moulding method. The cellulose nanofibre(CNF) was isolated using supercritical carbon dioxide and high-pressure homogenisation. The isolated CNF was characterised with transmission electron microscopy (TEM), FT-IR, zeta potential and particle size analysis. The mechanical, physical, and degradation properties of the resulting biocomposite were studied with moisture content, density, thickness swelling, tensile, flexural, scanning electron microscopy, thermogravimetry, and biodegradability analysis. The TEM, FT-IR, and particle size results showed successful isolation of cellulose nanofibre using this method. The result showed that the physical, mechanical, and degradation properties of PLA/chitosan/CNF biocomposite were significantly enhanced with cellulose nanofibre. The density, thickness swelling, and moisture content increased with the addition of CNF. Also, tensile strength and modulus; flexural strength and modulus increased; while the elongation reduced. The carbon residue from the thermal degradation and the glass transition temperature of the PLA/chitosan/CNF biocomposite was observed to increase with the addition of CNF. The result showed that the biocomposite has potential for green and sustainable industrial application.     

Study of the interfacial charge transfer in bismuth vanadate/reduce graphene oxide (BiVO4/rGO) composite and evaluation of its photocatalytic activity

Research on Chemical Intermediates - We prepared unique BiVO4/reduce graphene oxide (BiVO4/rGO) nanocomposite with enhanced photocatalytic ability by hydrothermal method applying...     

Synthesis and Characterization of Polyesters Based on Diethylketone Moiety

A new class of unsaturated polyesters based on diethylketone have been prepared by interfacial polymerization of 2,4-bis（4-hydroxybenzylidene）-3-pentanone（I） and 2,4-bis（4-hydroxy-3-methoxybenzylidene）-3-pentanone（II） with 4,4’-azodibenzoyl chloride and 3,3’-azodibenzoyl chloride at ambient temperature. The model compounds were synthesized by reaction of（I） and（II） with benzoyl chloride. The new monomers, model compounds and polyesters have been characterized by different spectral analyses. The polyesters have inherent viscosity of 0.55-0.80 d L/g and moderate number average molecular weight（Mn） in the range of 6150-7400 g/mol. Most of the compounds exhibited their solubility in aprotic solvents while partial solubility in various halogenated organic solvents was observed. The temperatures of 10% weight loss were high（225-330 °C） in nitrogen, indicating that these polyesters have excellent thermal stability. Doping with iodine dramatically raised the conductivity and produced brown colored semiconductive polymers with a maximum conductivity of 2.7 × 10-6 --1cm-1. Moreover, the morphological properties of selected example of polyesters were detected by SEM.     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

Indirect spectrophotometric determination of chromium(VI)

A new simple and sensitive spectrophotometric method for the determination of chromium(VI) is established. It relies upon the oxidation of iron(II) with the titled ion, in acidic medium, to form iron(III) which is complexed with tiron to form a stable blue color with maximum absorption at 650 nm. Adherence to Beer's law is observed in the range 10–100 μg of chromium(VI) per 25 ml, with a molar absorptivity of 5.6 × 10³ liters mol^?1 cm^?1, sensitivity index of 0.0093 μg cm^?1, relative error of ?5.0 to +0.3%, and relative standard deviation of 0.3–4.0%, depending on the concentration level. Furthermore, the reaction needs neither temperature control nor an extraction step.     

Outdoor ground impedance models

Many models for the acoustical properties of rigid-porous media require knowledge of parameter values that are not available for outdoor ground surfaces. The relationship used between tortuosity and porosity for stacked spheres results in five characteristic impedance models that require not more than two adjustable parameters. These models and hard-backed-layer versions are considered further through numerical fitting of 42 short range level difference spectra measured over various ground surfaces. For all but eight sites, slit-pore, phenomenological and variable porosity models yield lower fitting errors than those given by the widely used one-parameter semi-empirical model. Data for 12 of 26 grassland sites and for three beech wood sites are fitted better by hard-backed-layer models. Parameter values obtained by fitting slit-pore and phenomenological models to data for relatively low flow resistivity grounds, such as forest floors, porous asphalt, and gravel, are consistent with values that have been obtained non-acoustically. Three impedance models yield reasonable fits to a narrow band excess attenuation spectrum measured at short range over railway ballast but, if extended reaction is taken into account, the hard-backed-layer version of the slit-pore model gives the most reasonable parameter values.     

Nonlinear fractional differential equations of Sobolev type

Sobolev type nonlinear equations with time fractional derivatives are considered. Using the test function method, limiting exponents for nonexistence of solutions are found. Copyright © 2013 John Wiley & Sons, Ltd.