Indirect complexometric titration of potassium,rubidium, cesium,thallium and ammonium

A titrimetric method using EDTA for the determination of potassium, rubidium, cesium, thallium and ammonium has been developed. These cations are precipitated as M₂Ag[Co(NO₂)₆] and the blue cobalt thiocyanate complex in acetone-water mixed system is titrated with EDTA. Milligram quantities have been determined in the present work     

Chemical reaction studies in CH4/Ar and CH4/N2 gas mixtures of a dielectric barrier discharge

Chemical reactions in a dielectric barrier discharge at medium pressure of 250-300 mbar have been studied in CH(4)/Ar and CH(4)/N(2) gas mixtures by means of mass spectrometry. The main reaction scheme is production of H(2) by fragmentation of CH(4), but also production of higher order hydrocarbon molecules such as C(n)H(m) with n up to 9 including formation of different functional CN groups is observed. Formation of C(2)H(2), C(2)H(4), and C(2)H(6) molecules has been investigated in some detail. Significant differences are noted in comparison to a theoretical estimate.     

An Efficient and Green Synthesis of 5-Oxo-5, 6, 7, 8-tetrahydro- 4H-benzo-[b]-pyran Derivatives Promoted by InCl_3·4H_2O Under Microwave Irradiation

Construction of tetrahydropyran rings has attracted a great deal of interests in organic synthesis in recent years1, since tetrahydropyran moiety constitutes a structural unit in a number of natural products2. In addition, tetrahydropyran derivatives possess wide range of biological activities and pharmacological properties, such as anticancer activity3 and antihypersensitivity4. Many methods for the preparation of such compounds have already been developed5. Among them, condensation of α, β…     

Studies on crosslinking of EPDM-PE blends by thermoanalytical techniques

The effect of blend ratio and peroxide concentration on crosslinking characteristics of EPDM-PE blends were studied by Differential Scanning Calorimetry, Brabender plasticorder and Rheometer. Crosslinking of EPDM-PE blends follows first order reaction kinetics. The curing exotherm increases but activation energy decreases with increase in EPDM content in the blends. The same however increases with the increase in concentration of DCP upto a certain level, while the activation energy is almost independent of peroxide concentration. The cure rate increases whereas optimum cure time and energy consumption for curing decrease with increase in the EPDM-PE ratio. A method for determination of crosslinking efficiency in the case of blend systems was developed from high temperature modulus to predict the properties and the curing behaviour of the blends.

---

Zusammenfassung Mittels DSC, Brabender Plasticorder und Rheometer wurde der Einfluß von Mischungsverhältnis und Peroxidkonzentration auf den Vernetzungsverlauf von EPDM-PE-Gemischen untersucht. Die Vernetzung von EPDM-PE-Gemischen verläuft nach einer Reaktion erster Ordnung. Je höher der Anteil von EPDM im Gemisch, um so exothermer ist die Vernetzung und um so kleiner ist die dazugehörige Aktivierungsenergie. Mit dem Anwachsen der DCP-Konzentration bis zu einem gewissen Niveau wächst der exotherme Charakter, während die Aktivierungsenergie fast unabhängig von der Peroxidkonzentration ist. Mit dem Anstieg des EPDM/PE-Verhältnisses wächst die vernetzungsgeschwindigkeit, während die optimale Vernetzungszeit und der Energieverbrauch für die Vernetzung sinken. Es wurde ein Verfahren zur Bestimmung der Vernetzungseffizienz bei Mischsystemen entwickelt, um Eigenschaften und Vernetzungsverhalten von Gemischen voraussagen zu können.

     

乙基乙酰胺热解反应机理的MO研究

对于烷基乙酰胺的初始热解反应机理, 通常认为与酯类的热解反应相类似。Maccoll和Nagra通过对该热解反应的动力学研究, 认为两者存在不同。差异之一, 烷基乙酰胺存在两种可能的热解途径【参见本文(129页)前述反应方程(1),(2)】。而在酯类热解反应中(2)的活化能过高, 且四元环过渡态极不稳定。差异之二, 极性溶剂(比如乙酸)对酰胺热解反应的催化作用不明显, 而对酯类等气相热解反应的催化作用是十分显著的。为此, 我们用MINDO/3分子轨道法对乙基乙酰胺的初始热解反应进行了较全面的研究。用能量梯度法对此反应的反应物、中间体和生成物的平衡几何构型进行了全优化。(如图1所示)用极小能量途径法分别寻找反应(1)和反应(2)的初始过渡态, 继而用Powell法全优化过渡态的几何构型, 计算所得的过渡态TS1、TS2和TS3分别见图2a, 图3a和图4a。为了确证这些过渡态, 进行了振动分析研究, 结果表明这些过渡态的力常数矩阵的诸本征值中均只有一个负值, 且虚振动模式展示了走向各自的反应物和生成物的趋势, (如图2b,图3b和图4b所示)。它们的总能量及反应(1)和反应(2)的活化能列于表1. 对整个热解反应(1)作了内禀反应坐标(IRC)理论分析, 反应历程见图5所示. 与IRC相应的总能偶极矩以及部分关键的键长和原子净电荷变化一并列于表2.本文研究结果表明, 在乙基乙酰胺的初始反应中主反应即反应(1)与酯类反应相类似, ...     

结合三维静电势参数研究二取代苯的定量结构－疏水性关系

对含有常见取代基的92个二取代苯化合物进行了结构优化和静电势及其导出参数的计算,运用多元线性回归方法对化合物的疏水常数与分子的结构参数进行了关联.结果表明,分子表面负静电势的加和ΣV－S、分子空间内最负的静电势Vmin、表面最大静电势Vs,max以及分子体积V、极性表面积APS和分子的偶极密度μ/V这六个参数,可以很好地用于表达这些化合物疏水性与分子结构间的定量关系,而不用具体考虑分子中极性基团间的相互作用.用建立起来的QSPR(quantitative structure-property relationship)关系式对111个类似化合物的疏水性进行了预测,获得了满意的结果.     

Static dipole and quadrupole polarizabilities of alkaline earth atoms

Static dipole and quadrupole polarizability (α_d and α_q, respectively) values of coupled Hartree–Fock quality have been calculated for the alkaline earth atoms Be(2s), Mg(3s), Ca(4s), and Sr(5s) using a method based on the many-body perturbation theory. The present values of α_d and α_q for Be and α_d for Mg are in excellent agreement with the other available results of similar accuracy. The CHF calculations of α_d for Sr and α_q for Mg, Ca, and Sr are being reported for the first time.     

The use of ion-molecule reactions in the mass spectrometric location of double bonds

A method for the location of the positions of carbon-carbon double bonds using high pressure mass spectrometry is proposed. A known olefinic molecular ion reacts with a second, unknown olefin to form a four-centre complex, which fragments with retention of the structural identity of methylene and substituted methylene groups to eliminate a new olefin molecule and to form an unsaturated ion from which the position of the double bond in the unknown olefin can be inferred. Vinyl methyl ether proved to be a convenient reagent gas and its molecular ion undergoes the required reaction with several classes of olefinic compound. Conjugated dienes and unsaturated compounds containing electronegative groups do not undergo this reaction.     

Surface composition and property of film prepared with aqueous dispersion of polyurethaneurea-acrylate including fluorinated block copolymer

The aqueous dispersion of polyurethaneurea-acrylate (PUA) including small amount of fluorinated block copolymers containing carboxyl groups (PATF), which can be dissolved in water, was used to make films and the surface properties of these films were examined. The experimental data show that the modified PUA film exhibits a hydrophobic surface property, although the original surface of PUA film is hydrophilic. The surface composition of the modified PUA film was measured by ATR and XPS. The results indicate that there is a concentration gradient of the fluorine groups along the lines of thickness of the modified film and towards the outmost surface layer, resulting from the migration of fluorinated blocks to the air side surface of the modified PUA film during the film formation process. However, the PUA film can not be modified effectively by adding the sodium salt of PATF, since the urethane groups in the system are easy to occupy on the surface of the film.     

DFT study and Monte Carlo simulation on proton transfers of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water

Density functional theory (DFT) and Monte Carlo (MC) simulation with free energy perturbation (FEP) techniques have been used to study the tautomeric proton transfer reaction of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water. Two reaction pathways were considered: the direct and water-assisted transfers. The optimized structures and thermodynamic properties of stationary points for the title reaction system in the gas phase were calculated at the B3LYP/6-311+G(d, p) level of theory. The potential energy profiles along the minimum energy path in the gas phase and in water were obtained. The study of the solvent effect of water on the proton transfer of 2-amino-2-oxozoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline indicates that water as a solvent is favorable for the water-assisted process and slows down the rate of the direct transfer pathway.