Densities,Refractive Indices,Ultrasonic Speeds and Excess Properties of Acetonitrile + Poly(ethylene glycol) Binary Mixtures at Temperatures from 298.15 to 313.15 K

The densities, ρ, refractive indices, n _D, and ultrasonic speeds, u, of binary mixtures of acetonitrile (AN) with poly(ethylene glycol) 200 (PEG200), poly(ethylene glycol) 300 (PEG300) and poly(ethylene glycol) 400 (PEG400) were measured over the entire composition range at temperatures (298.15, 303.15, 308.15 and 313.15) K and at atmospheric pressure. From the experimental data, the excess molar volumes, \( V_{\text{m}}^{\text{E}} \) , deviations in refractive indices, \( \Delta n_{\text{D}} \) , excess molar isentropic compressibility, \( K_{{s , {\text{m}}}}^{\text{E}} \) , excess intermolecular free length, \( L_{\text{f}}^{\text{E}} \) , and excess acoustic impedance, Z ^E, have been evaluated. The partial molar volumes, \( \overline{V}_{\text{m,1}} \) and \( \overline{V}_{\text{m,2}} \) , partial molar isentropic compressibilities, \( \overline{K}_{{s , {\text{m,1}}}} \) and \( \overline{K}_{{s , {\text{m,2}}}} \) , and their excess values over whole composition range and at infinite dilution have also been calculated. The variations of these properties with composition and temperature are discussed in terms of intermolecular interactions in these mixtures. The results indicate the presence of specific interactions among the AN and PEG molecules, which follow the order PEG200 < PEG300 < PEG400.     

Bis[1,1′‐bis(diphenylphosphino)ferrocenium] hexadecachlorotetraantimony(III) ethanol solvate

In the title compound, [Fe(C₁₇H₁₄P)₂]₂[Sb₄Cl₁₆]·C₂H₆O, the Fe atoms lie on inversion centres and the pairs of cyclopentadienyl rings are consequently in a fully staggered conformation. The centrosymmetric anionic clusters formed by [Sb₄Cl₁₆]^4? are surrounded by the cations and are held together by weak C—H?Cl interactions. These formations stack along the a axis to form columns, and the columns are interconnected by another weak C—H?Cl interaction along the b axis.     

On the wake of a circular cylinder with nodal and saddle attachment

Flow field of a cylinder with a mid-span curvature was experimentally investigated in a wind tunnel and a water tunnel. The azimuthal orientation of the cylinder was changed to obtain a nodal, saddle and a mixed nodal–saddle type of flow attachment. Surface flow topology suggested that the nature of the attachment strongly influenced the spanwise distributions of foci structures that play a significant role in introducing three-dimensionality in the immediate wake. Flow visualization in the water tunnel revealed that the length of a vortex formation region also followed the changes in the nature of the attachment. A symmetric shedding of vortices was observed with a saddle type of attachment. Wake mean velocity profiles showed that the velocity defect and therefore the drag of a curved cylinder was minimum for nodal, and maximum for saddle type of attachment. Nomenclature of the wake was compared with asymptotic profiles and equilibrium parameters. Approach to self-preservation, similarity and other features are discussed.     

Superconductivity in Sr<Subscript>0.75</Subscript>Y<Subscript>0.75</Subscript>Ba<Subscript>1.5</Subscript>Cu<Subscript>3</Subscript> O<Subscript>7−<Emphasis Type="Italic">d</Emphasis></Subscript> compounds

The effect of simultaneous Sr substitution at the Ba and Y sites has been studied in the Sr_0.75Y_0.75Ba_1.5Cu₃O_7–dsystem. Attempts to replace 25% Y and 25% Ba have been successful and superconductivity was observed above 78 K for Sr_0.75Y_0.75Ba_1.5Cu₃O_7–d compound with high oxygen content, i.e., O_6.76, and having orthorhombic crystal symmetry. The compound was treated in argon gas at 800°C to reduce the oxygen content and to induce some structural changes. The Sr_0.75Y_0.75Ba_1.5Cu₃O_6.1 compound thus obtained has tetragonal symmetry and low oxygen content, O_6.1. It has also shown superconductivity at 28 K. The paper presents a careful comparison of the structural and electrical properties and infrared absorbance spectra of the two compounds with the same metallic composition, Sr_0.75Y_0.75Ba_1.5Cu₃, but with different oxygen content and crystal symmetry. The study clearly establishes the occurrence of superconductivity in tetragonal Sr-substituted (both at Y and Ba sites in) YBCO.     

Pyrrolidinones derived from (S)-pyroglutamic acid: penmacric acid and analogues

Alkylation reactions using alpha-halolactams or lactam enolates derived from bicyclic lactam templates can proceed with high endo- or exo- diastereoselectivity respectively. In the latter case, stereochemical correction by means of enolate generation and hindered phenol quench is possible with moderate efficiency. This protocol has been applied to the synthesis of protected penmacric acid and its analogues.     

9,10‐Di­phenyl‐9,10‐epi­dioxy­anthra­cene and 9,10‐di­hydro‐10,10‐di­methoxy‐9‐phenyl­anthracen‐9‐ol

9,10‐Di­phenyl‐9,10‐epi­dioxy­anthracene, C₂₆H₁₈O₂, (I), was accidentally used in a photo­oxy­genation reaction that produced 9,10‐di­hydro‐10,10‐di­methoxy‐9‐phenyl­anthracen‐9‐ol, C₂₂H₂₀O₃, (II). In both compounds, the phenyl rings are approximately orthogonal to the anthracene moiety. The conformation of the anthracene moiety differs as a result of substitution. Intramolecular C—H⃛O interactions in (I) form two approximately planar S(5) rings in each of the two crystallographically independent mol­ecules. The packing of (I) and (II) consists of molecular dimers stabilized by C—H⃛O interactions and of molecular chains stabilized by O—H⃛O interactions, respectively.     

Synergistic extraction of Ce(III), Eu(III) and Tm(III) with a mixture of picrolonic acid and benzo-15-crown-5 in chloroform

Summary The synergistic mixture comprising picrolonic acid (HPA) and benzo-15-crown-5 (B15C5) in chloroform has been used for the extraction of Ce(III), Eu(III) and Tm(III) as representatives of lanthanide(III) ions from pH 1-2 solutions having ionic strength of 0.1 mol^. dm^-3(K⁺/H⁺, Cl^-). The composition of the extracted species has been determined as M(PA)₃^. nB15C5 where M is Ce, Eu and Tm and n=1 or 2. The influence of various anions and cations on the extraction of these ions has also been studied and only oxalate, cyanide and tartrate have some deleterious effect. The extraction equilibrium constants have been evaluated and discussed.     

Tetragonal nanocrystals from the Zr0.5Ce0.5O2 solid solution by hydrothermal method

The formation of tetragonal Zr(0.5)Ce(0.5)O(2) solid solution nanocrystallites of 5 +/- 1 nm size by a hydrothermal method at 120 degrees C for 6 h was confirmed by careful Raman and XRD studies for the first time. It was characterized as the t' '-form with an axial ratio of c/a = 1 but with oxygen ion displacements. The as-prepared sample was hydrous in nature, which is responsible for the lattice expansion. However, most of the water held in the structure can be expelled by heating the sample above 600 degrees C. Above 1050 +/- 50 degrees C the t' '-form of tetragonal Zr(0.5)Ce(0.5)O(2) solid solution dissociates into two phases, cubic phase and the t-form of tetragonal phases.     

Bis­(ethyl­enedi­amine)copper(II) bis(O,O′‐diethyl di­thio­phosphate)

In the structure of the title compound, [Cu^II­(en)₂][(EtO)₂P(S)S]₂ (en is ethyl­ene­di­amine) or [Cu(C₂H₈N₂)₂](C₄H₁₀O₂PS₂)₂, the Cu atom lies on a center of inversion and is coordinated in a slightly distorted square coordination geometry by four N atoms from two ethyl­enedi­amine mol­ecules. The diethyl di­thio­phosphate moieties, (EtO)₂P(S)S^?, act as counter‐anions.