Phorbol Esters from Jatropha Meal Triggered Apoptosis, Activated PKC-δ, Caspase-3 Proteins and Down-Regulated the Proto-Oncogenes in MCF-7 and HeLa Cancer Cell Lines

Jatropha meal produced from the kernel of Jatropha curcas Linn. grown in Malaysia contains phorbol esters (PEs). The potential benefits of PEs present in the meal as anticancer agent are still not well understood. Hence, this study was conducted to evaluate the cytotoxic effects and mode of actions of PEs isolated from Jatropha meal against breast (MCF-7) and cervical (HeLa) cancer cell lines. Isolated PEs inhibited cells proliferation in a dose-dependent manner of both MCF-7 and HeLa cell lines with the IC₅₀ of 128.6 ± 2.51 and 133.0 ± 1.96 μg PMA equivalents/mL respectively, while the values for the phorbol 12-myristate 13-acetate (PMA) as positive control were 114.7 ± 1.73 and 119.6 ± 3.73 μg/mL, respectively. Microscopic examination showed significant morphological changes that resemble apoptosis in both cell lines when treated with PEs and PMA at IC₅₀ concentration after 24 h. Flow cytometry analysis and DNA fragmentation results confirmed the apoptosis induction of PEs and PMA in both cell lines. The PEs isolated from Jatropha meal activated the PKC-δ and down-regulated the proto-oncogenes (c-Myc, c-Fos and c-Jun). These changes probably led to the activation of Caspase-3 protein and apoptosis cell death occurred in MCF-7 and HeLa cell lines upon 24 h treatment with PEs and PMA. Phorbol esters of Jatropha meal were found to be promising as an alternative to replace the chemotherapeutic drugs for cancer therapy.     

Decomposition behaviors of various crystalline celluloses as treated by semi-flow hot-compressed water

Various types of crystalline cellulose consisting of group I (cell I, III_I, IV_I) and group II (cell II, III_II, IV_II) prepared from cotton linter were adjusted for their degree of polymerization (DP) as starting materials. These celluloses were then treated by semi-flow hot-compressed water (HCW) at 230–270 °C/10 MPa/2–15 min to study their decomposition behaviors. The treatments performed resulted in residues of celluloses and water-soluble (WS) portions. Consequently, the crystallinity of the residues was found to remain the same, but the DP was reduced as the temperature increased. Additionally, X-ray diffractometry and Fourier transform-infrared analyses demonstrated that crystallographic changes occurred for residues of cell III_I, IV_I and III_II. Despite these changes, the overall results of the residues showed that group I has higher resistance to decomposing than group II. As for the WS portions, the yields of the hydrolyzed and degraded products were higher in group II than group I, indicating that group II is less resistant to decomposition by HCW treatment. Results for both the residues and WS portions are in agreement with each other, showing that the degree of difficulty of decomposition was higher in group I than group II. Therefore, the decomposition behaviors of the celluloses are due to differences in the crystalline forms.     

Electronic energy transfer from the S2 state of rhodamine 6G

In this paper we present the results of an experimental study of intermolecular electronic energy transfer (EET) from the short-lived Second excited singlet state of rhodamine 6G (R6G) to the ground state of 2,5-bis [5′-tert-butyl-2-benzoxazolyl] thiophene (BBOT). The S₂ state of the donor was excited by sequential, time-delayed, two-photon excitation (STDTPE) utilizing the second harmonic and the first harmonic of a mode-locked Nd³⁺: glass laser, while the EET process was interrogated by monitoring the enhancement of the S₁ → S₀ fluorescence of BBOT. The enhancement of the fluorescence intensity of BBOT was found to be linear in the energies of the two exciting pulses, and linear in the concentration of the energy acceptor (over the BBOT concentration range of (0.3–7) × 10^?5 M), which is in accord with the predictions of the Forster—Dexter mechanism for resonant EET from an ultrashort-lived donor state at low acceptor concentrations. Quantitative measurements of the S₂ → S₀ fluorescence yield in R6G solution directly excited by STDTPE and of the S₁ → S₀ fluorescence of BBOT from R6G + BBOT solutions resulting from EET led to the values of Y_D(S₂ → S₀) = (2.1 ± 0.5) × 10^?6 for the emission quantum yield of the S₂ state of R6G and τr_D(S₂) ≈ 3 × 10^?14 s for the lifetime of the metastable S₂ state of this molecule.     

COMPARISON OF THE EFFECTS OF ULTRAVIOLET RADIATION ON THE INTRACELLULAR CATALASE OF AEROBIC AND ANAEROBIC YEAST

Abstract— Suspensioris of aerobic and anaerobic yeast were subjected to ultraviolet radiation (principally 254 mµ ) under closely comparable experimental conditions, and changes in the level and in the temperature dependence of their catalase activity were determined. Qualita tively, the effects of U.V. on the enzyme of the anaerobic cells were similar to those on that of the aerobic cells. The effect of U.V. on the anaerobic catalase differed from that on the aerobic enzyme in the following respects: I, a considerably greater dose of U.V. was necessary in order to attain the maximum activity and the minimum activation energy of the enzyme-substrate system; 2, a far greater dose was required before appreciable photoinactivation of the maxi mally active enzyme occurred; 3, photoinactivation proceeded at less than one-half the rate; 4, the u.v.-induced increase in the catalase activity of the suspension was virtually complete before appreciable reduction in activation energy occured. The first three of these differences were interpreted in terms of a model, which pictures the anaerohic catalase as being tightly bound to an intracellular chromophore group.     

Bismuth Oxyiodide Nanoflakes Showed Toxicity Against the Malaria Vector <Emphasis Type="Italic">Anopheles stephensi</Emphasis> and In Vivo Antiplasmodial Activity

Anopheles stephensi is a mosquito vector of malaria, which is still considered a relevant public health problem due to increasing outdoor transmission, growing resistance to insecticides used to target vectors, and antiplasmodial drugs as well. Thus, there is a vital need to explore novel sources of effective compounds. In this study, the hydrothermal method was used for the synthesis of bismuth oxyiodide (BiOI) nanoflakes. Furthermore, the toxicity of BiOI nanoflakes was evaluated for the first time on A. stephensi, as well as in vivo against the malaria parasite Plasmodium berghei. The synthesis of BiOI nanoflakes was confirmed by various characterization techniques, including X-ray diffraction, Fourier transform-infrared spectroscopy, field emission scanning electron microscopy and transmission electron microscopy (HR-TEM). LC₅₀ of BiOI nanoflakes on A. stephensi were 2.263 ppm (larva I), 3.414 ppm (II), 4.956 ppm (III), 6.983 ppm (IV) and 8.605 ppm (pupae). In vivo antiplasmodial experiments conducted on P. berghei infecting albino mice showed 27.2% of chemosuppression after 4 days of treatment with 300 mg/kg/day of BiOI, a lower performance if compared to chloroquine. Overall, our results suggested that hydrothermal synthesis of BiOI nanoflakes may be considered to develop newer and safer tools for malaria vector control.     

Physicochemical Investigation of HDDP Azomethine Dye as Turn-On Fluorescent Chemosensor for High Selectivity and Sensitivity of Al<Superscript>3+</Superscript> Ions

4-[(2-Hydroxy-naphthalen-1-ylmethylene)-amino]-1,5-dimethyl-2-phenyl-1,2-dihydro-pyrazol-3-one (HDDP) was synthesized by the reaction of 4-amino-1,5-dimethyl-2-phenyl-1,2-dihydro-3H-pyrazol-3-one with 2-hydroxy-l-naphthaldehyde. The structure was confirmed by the IR, ¹H-NMR, ¹³C-NMR, and EI-MS spectra and elemental analysis. Physicochemical parameters of the HDDP such as extinction coefficient, oscillator strength, transition dipole moment, Stokes shift, and fluorescence quantum yield in different solvents were studied on the basis of polarities. The interactions of various metal ions with HDDP were also studied using steady state fluorescence measurements. The emission profile reveals that it acts as off–on type fluorescent chemosensor for selective and sensitive detection of Al³⁺ ions. Complexation stoichiometry and mechanism of enhancement were determined from a Benesi–Hildebrand plot.     

Sensitive and selective fluorescence detection of aqueous uranyl ions using water-soluble CdTe quantum dots

Herein we report a fluorescent method for sensitive and selective detection of uranyl ions using CdTe quantum dots functionalized with mercaptopropionic acid, which the fluorescence of the quantum dots could be quantitatively quenched through electron transfer mechanism. The detection limit of the method was estimated to be 4 nM, less than the maximum allowed content of 130 nM for uranyl in drinking water defined by the U.S. Environmental Protection Agency. Furthermore, the probe was successfully applied in detection of uranyl ions in real samples, demonstrating its potential practical applications for monitoring of uranyl ions in environment.     

Electrical and electrochemical characteristics of La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>CoO<Subscript>3-δ</Subscript> cathode materials synthesized by a modified citrate-EDTA sol-gel method assisted with activated carbon for proton-conducting solid oxide fuel cell application

The electrical conductivity and electrochemical performance of a La_0.6Sr_0.4CoO_3-δ (LSC) cathode produced by a modified citrate-EDTA sol-gel method assisted with activated carbon are characterized for a proton-conducting solid oxide fuel cell (H⁺??SOFC) application at intermediate temperature. Thermogravimetric analysis revealed that the decomposition of the unrequired intermediate compounds in the precalcined powder was completed at 800?°C. A single LSC perovskite phase was formed at a calcination temperature of 900?°C, as confirmed by X-ray diffraction analysis. The particle size, crystallite size, and BET-specific surface area of the powder are 219–221?nm, 18?nm, and 9.87?m²?g^?1, respectively. The high index value of the extent of agglomeration (5.53) showed that the powder was barely agglomerated. Bulk LSC sintered at 1200?°C for 2?h showed the highest direct-current electrical conductivity (σ_d.c) compared to that of bulk LSC sintered at 1000?°C and 1100?°C. The value of σ_d.c was affected by the density and porosity of the sintered samples. The area specific resistance (ASR) of screen-printed LSC working on a proton conductor of BaCe_0.54Zr_0.36Y_0.1O_2.95 (BCZY) decreased from 5.0?Ω?cm²–0.06?Ω?cm² as the temperature increased from 500?°C to 800?°C with an activation energy of 1.079?eV. Overall, in this work, the LSC material produced with the aid of activated carbon meet the requirements for the application as a cathode in an intermediate temperature H⁺-SOFC.

Open image in new window