Mutual Separation and Determination of Th(IV) and U(VI) Using Arsenazo III as a Dye Collector Reagent by Flotation‐Spectrophotometric Method

This paper reports a simple and highly selective method for the separation, preconcentration, and determination of trace amounts of thorium and uranium in some complex samples via staircase flotation. The method is based on the initial flotation of the Th(IV)‐arsenazo III complex in the presence of U(VI) from a solution of 5 mol dm^?3 HCl, then reduction of U(VI) to U(IV) and repetition of the flotation step. In both steps, the floated complex was dissolved in a 5‐mL portion of methanol and its absorbance was measured at 655 nm, spectrophotometrically. For a 30‐mL portion of the sample, Beer's law was obeyed over the concentration ranges of 3.40 × 10^?7to 3.06 × 10^?6 mol dm^?3 for Th(IV) and3.40 × 10^?7 to 3.40 × 10^?6 mol dm^?3 for U(IV) with the apparent molar absorptivity of 4.20 × 10⁵ dm³ mol^?1 cm^?1 and 3.59 × 10⁵ dm³ mol^?1 cm^?1, respectively. The RSDs (n = 7) corresponding to 1.7 × 10^?6 mol dm^?3 of Th(IV) and U(IV) were obtained as 1.7% and 1.87%. The detection limits (7 blanks) for both the metal ions were found to be 1.7 × 10^?7 mol dm^?3. The important benefit of the method is that the determinations are free from the interference of almost all cations and anions found in the complex matrixes, such as seawater samples. The proposed method was also applied to reference materials, and the determinations were shown to have good agreement with the certified values.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

C→N Migrations of the ethoxycarbonyl group in reactions of ortho-substituted aryl isocyanates with the 1,3-zwitterion derived from triisopropylphosphine and ethyl 2-cyanoacrylate

The reactions of meta—para-substituted aryl isocyanates with phosphorus-containing 1,3-zwitterions, which proceed with the CN migration of the CO₂Et group to form the corresponding carbamates, were extended to ortho-substituted aryl isocyanates. The influence of the steric and electronic effects of the ortho substituents in the aromatic rings of aryl isocyanates on the ease of this rearrangement is qualitatively considered.     

Folding, conformational changes, and dynamics of cytochromes C probed by NMR spectroscopy

NMR spectroscopy has become a vital tool for studies of protein conformational changes and dynamics. Oxidized Fe(III)cytochromes c are a particularly attractive target for NMR analysis because their paramagnetism (S = (1)/(2)) leads to high (1)H chemical shift dispersion, even for unfolded or otherwise disordered states. In addition, analysis of shifts induced by the hyperfine interaction reveals details of the structure of the heme and its ligands for native and nonnative protein conformational states. The use of NMR spectroscopy to investigate the folding and dynamics of paramagnetic cytochromes c is reviewed here. Studies of nonnative conformations formed by denaturation and by anomalous in vivo maturation (heme attachment) are facilitated by the paramagnetic, low-spin nature of native and nonnative forms of cytochromes c. Investigation of the dynamics of folded cytochromes c also are aided by their paramagnetism. As an example of this analysis, the expression in Escherichia coli of cytochrome c(552) from Nitrosomonas europaea is reported here, along with analysis of its unusual heme hyperfine shifts. The results are suggestive of heme axial methionine fluxion in N. europaea ferricytochrome c(552). The application of NMR spectroscopy to investigate paramagnetic cytochrome c folding and dynamics has advanced our understanding of the structure and dynamics of both native and nonnative states of heme proteins.     

Complexation of palladium cyanide with imidazolidine-2-thione and its derivatives

Summary Pd(CN)₂ reacts with imidazolidine-2-thione (Imt), 1,3-diazinane-2-thione(Diaz), 1,3-diazipnane-2-thione (Diap) and their derivatives to yield complexes of stoichiometry [PdL₂(CN)₂] or [PdL(CN)₂] (L = Imt, Diaz or Diap and L = Imt having N-Me, Et or Pr substituents), which were characterized by elemental analysis, i.r., ¹H and ¹³C n.m.r. spectroscopy. Both mono- and bis ligand complexes are thought to be square planar with the monoligand binding to metal via sulphur (bridging) and the bis ligand via the monodentate thione group. The ¹³C enriched Pd(¹³CN)₂ complex was prepared and the ¹³C n.m.r. recorded. The C-2 resonance of ¹³C n.m.r. of Imt, Diaz or Diap complexes of the copper(I), silver(I), gold(I) and palladium(II) were compared.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -     

Differential transition-state stabilization in enzyme catalysis: quantum chemical analysis of interactions in the chorismate mutase reaction and prediction of the optimal catalytic field

Chorismate mutase is a key model system in the development of theories of enzyme catalysis. To analyze the physical nature of catalytic interactions within the enzyme active site and to estimate the stabilization of the transition state (TS) relative to the substrate (differential transition state stabilization, DTSS), we have carried out nonempirical variation-perturbation analysis of the electrostatic, exchange, delocalization, and correlation interactions of the enzyme-bound substrate and transition-state structures derived from ab initio QM/MM modeling of Bacillus subtilis chorismate mutase. Significant TS stabilization by approximately -23 kcal/mol [MP2/6-31G(d)] relative to the bound substrate is in agreement with that of previous QM/MM modeling and contrasts with suggestions that catalysis by this enzyme arises purely from conformational selection effects. The most important contributions to DTSS come from the residues, Arg90, Arg7, Glu78, a crystallographic water molecule, Arg116, and Arg63, and are dominated by electrostatic effects. Analysis of the differential electrostatic potential of the TS and substrate allows calculation of the catalytic field, predicting the optimal location of charged groups to achieve maximal DTSS. Comparison with the active site of the enzyme from those of several species shows that the positions of charged active site residues correspond closely to the optimal catalytic field, showing that the enzyme has evolved specifically to stabilize the TS relative to the substrate.     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.     

4‐[3‐(3,4‐Di­methoxy­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate and 4‐[3‐(2‐bromo­phenyl)­prop‐2‐enoyl]­phenyl methacryl­ate

Chalcones (α,β‐unsaturated ketones) are effective antitumour agents. It has been proved that having halogen or methoxy groups substituted in various positions of the phenyl ring enhances the activity of chalcones many times. The title compounds, C₂₁H₂₀O₅ and C₁₉H₁₅BrO₃, respectively, were chosen for crystallographic study in order to determine their structures and conformations. In both compounds, the keto group is in the s‐cis conformation and is almost planar. There are weak intramolecular interactions in both structures.