Sonoelectroanalysis: investigation of bismuth-film-modified glassy carbon electrodes

Bismuth-modified glassy carbon electrodes have been investigated for their suitability in sonoelectroanalysis. The stability of the bismuth film to the application of ultrasound was assessed via voltammetric and atomic force microscopy (AFM) studies which revealed little ablation at powers up to an intensity of 130 W cm^–2 delivered from a 25-kHz sonic horn. Furthermore, bismuth-film-modified glassy carbon electrodes were evaluated for the sonoelectroanalytical quantification of zinc and cadmium. Detection limits of 2×10^–7 M and 6×10^–9 M respectively were found after a 60-s deposition time via an acoustically assisted deposition protocol.     

Renewable-surface sol-gel derived carbon ceramic electrode fabricated by [Ru(bpy)(tpy)Cl]PF6 and its application as an amperometric sensor for sulfide and sulfur oxoanions

A highly sensitive and fast responding sensor for the determination of thiosulfate, sulfite, sulfide and dithionite is described. It consists of a chemically modified carbon ceramic composite electrode (CCE) containing [Ru(bpy)(tpy)Cl]PF6 complex that was constructed by the sol-gel technique. A reversible redox couple of Ru(II)/Ru(III) was observed as a solute in acetonitrile solution and as a component of carbon based conducting composite electrode. Electrochemical behavior and stability of modified CCE were investigated by cyclic voltametry, the apparent electron transfer rate constant (kappa(S)) and transfer coefficient (a) were determined by cyclic voltametry which were about 28 s(-1) and 0.43 respectively. Electrocatalytic oxidation of S(2-), SO3(2-), S2O4(2-) and S2O3(2-) were effective at the modified electrode at significantly reduced overpotentials and in the pH range 1-11. Optimum pH values for amperometric detection of thiosulfate, dithionite, sulfide and sulfite are 7, 9, 2 and 2. Under the optimized conditions the calibration curves are linear in the concentration ranges 1-500, 3-80, 2-90 and 1-100 microM for S2O3(2-), SO3(2-), S2- and S2O4(2-) determination. The detection limit (signal to noise is 3) and sensitivity are 0.5 and 12, 2.8 and 6, 1.6 and 8, and 0.65 microM and 80 nA microM(-1) for thiosulfate, sulfite, sulfide and dithionite detection. The modified carbon ceramic electrode doped with Ru-complex shows good reproducibility, a short response time (t < 2 s), remarkable long term stability (> 6 month) and especially good surface renewability by simple mechanical polishing (RSD for eight successive polishing is 2%). The advantages of this sulfur compound amperometric detector based on ruthenium doped CCE are high sensitivity, inherent stability at a broader pH range, excellent catalytic activity, less expense and simplicity of preparation in comparison with recently published papers. This sensor can be used as a chromatographic detector for analysis of sulfur derivatives.     

Modification of carbon ceramic electrode prepared with sol-gel technique by a thin film of chlorogenic acid: application to amperometric detection of NADH

The carbon ceramic electrode prepared with sol-gel technique is modified by a thin film of chlorogenic acid (CGA). By immersing the carbon ceramic electrode in aqueous solution of chlorogenic acid at less than 2 s a thin film of chlorogenic acid adsorbed strongly and irreversibly on the surface of electrode. The cyclic voltammetry of the resulting modified CCE prepared at optimum conditions shows a well-defined stable reversible redox couple due to hydroquinone/quinone system in both acidic and basic solutions. The modified electrode showed excellent electrocatalytic activity toward NADH oxidation and it also showed a high analytical performance for amperometric detection of NADH. The catalytic rate constant of the modified carbon ceramic electrode for the oxidation of NADH is determined by cyclic voltammetry measurement. Under the optimised conditions the calibration curve is linear in the concentration range 1-120 μm. The detection limit (S/N = 3) and sensitivity are 0.2 μM and 25 nA μM⁻¹.The results of six successive measurement-regeneration cycles show relative standard deviations of 2.5% for electrolyte solution containing 1 mM NADH, indicating that the electrode renewal gives a good reproducible and antifouling surface. The advantages of this amperometric detector are: high sensitivity, excellent catalytic activity, short response time t < 2 s, remarkable long-term stability, simplicity of preparation at short time and good reproducibility.     

Synthesis of new enantiomerically pure spirooxindolopyrrolizidines via a three-component asymmetric 1,3-dipolar cycloaddition reaction of azomethine ylides derived from isatin

An efficient, one-pot, three-component procedure for the synthesis of a small library of new chiral spirooxindolopyrrolizidines with high regio-, diastereo-, and enantioselectivity, from the 1,3-dipolar cycloaddition of azomethine ylides and optically active cinnamoyl oxazolidinone is described. The process occurs at room temperature in aqueous ethanol as a green solvent and in the absence of any Lewis acids. The oxazolidinone chiral auxiliary is removed in a non-destructive manner. The reaction mechanism is discussed on the basis of the assignment of the absolute configuration of the cycloadducts, and on theoretical calculations.     

MICROWAVE SYNTHESIS OF TRICHLORFON AND ITS ANALOGUES

The synthesis of dialkyl-(2,2,2-trichloro-1-Hydroxyethyl) phosphonates using dialkyl hydrogen phosphite and chloral hydrate under solvent-free condition by microwave irradiation is reported. The products were chrachetrized using ¹ H NMR, ¹³ C NMR, and ³¹ P NMR spectroscopy.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Synthesis of Polymer Nanoparticles in the Presence of Diatoms as Sustainable Bio-Templates

Colloid Journal - Preparation of complex nano- and micron-sized non-spherical particulate geometries still remains a challenge. One potential approach is the utilization of natural templates with...     

Adsorptive Stripping Voltammetric Determination of Imipramine and Amitriptiline at a Nanoclay Composite Carbon Ionic Liquid Electrode

A new carbon nanocomposite electrode has been designed by incorporation of montmorillonite nanoclay into a carbon ionic liquid electrode for the electrochemical determination of imipramine (IMP) and amitriptyline (AMT). They are expected to accumulate on the electrode surface through the cooperative interaction of ionic liquid and clay with the drugs. The proposed electrode also possesses attractive electrocatalytic effects towards the drugs especially AMT. Low detection limits of 19 nM for IMP and 24 nM for AMT were achieved. The proposed nanocomposite electrode exhibits good applicability for monitoring IMP and AMT in pharmaceutical formulations and blood serum samples.     

Database Survey of Single-and-Half Phosphorus–Oxygen Bonds in Salts with the C2PO2 Segment: Crystal Structure of [NH2C5H4NH][(C6H5)2P(O)(O)]⋅2H2O

Crystallography Reports - For structures with a C2PO2 skeleton, a comparison of “single-and-half” phosphorus–oxygen bonds with single and double phosphorus–oxygen bonds is...     

Multidimensional optimization of finite difference schemes for Computational Aeroacoustics

Because of the long propagation distances, Computational Aeroacoustics schemes must propagate the waves at the correct wave speeds and lower the isotropy error as much as possible. The spatial differencing schemes are most frequently analyzed and optimized for one-dimensional test cases. Therefore, in multidimensional problems such optimized schemes may not have isotropic behavior. In this work, optimized finite difference schemes for multidimensional Computational Aeroacoustics are derived which are designed to have improved isotropy compared to existing schemes. The derivation is performed based on both Taylor series expansion and Fourier analysis. Various explicit centered finite difference schemes and the associated boundary stencils have been derived and analyzed. The isotropy corrector factor, a parameter of the schemes, can be determined by minimizing the integrated error between the phase or group velocities on different spatial directions. The order of accuracy of the optimized schemes is the same as that of the classical schemes, the advantage being in reducing the isotropy error. The present schemes are restricted to equally-spaced Cartesian grids, so the generalized curvilinear transformation method and Cartesian grid methods are good candidates. The optimized schemes are tested by solving various multidimensional problems of Aeroacoustics.