Probing the self-assembly of inorganic cluster architectures in solution with cryospray mass spectrometry: growth of polyoxomolybdate clusters and polymers mediated by silver(I) ions

Cryospray mass spectrometry (CSI-MS) has been used to probe the mechanism of self-assembly of polyoxometalate clusters in solution. By using CSI-MS and electronic absorbance spectroscopy it was possible to monitor in real-time the self-assembly of polymeric chains based on [Ag 2Mo 8O 26] (2-) n building blocks. The role of the Ag (I) ion in the solution state rearrangement of molybdenum Lindqvist ({Mo 6}) into the silver-linked beta-octamolybdate ({Mo 8}) structure (( n-C 4H 9) 4N) 2 n [Ag 2Mo 8O 26] n ( 1) is revealed in unprecedented detail. A monoanionic series, in particular [AgMo m O 3 m+1 ] (-) where m = 2 to 4, and series involving mixed oxidation state polyoxomolybdate species, which illustrate the in-solution formation of the (Ag{Mo 8}Ag) building blocks, have been observed. CSI-MS detection of species with increasing metal nuclearity concomitant with increasing organic cation contribution supports the hypothesis that the organic cations used in the synthesis play an important structure-directing role in polyoxometalate (POM) growth in solution. A real-time decrease in [{Mo 6}] and associated increase in [{Mo 8}] have been observed using CSI-MS and electronic absorbance spectroscopy, and the rate of {Mo 6} interconversion to {Mo 8} was found to decrease on increasing the size of the countercation. This result can be attributed to the steric bulk of larger organic groups hindering {Mo 6} to {Mo 8} rearrangement and hindering the contact between silver cations and molybdenum anions.     

Aryloxy tetrazoles with axial chirality: Synthesis and partial resolution of 5‐(1‐(2‐methoxynaphthalen‐1‐yl)naphthalen‐2‐yloxy)‐1H‐tetrazole

5‐(1‐(2‐Methoxynaphthalen‐1‐yl)naph‐ thalen‐2‐yloxy)‐1H‐tetrazole as the first aryloxy tetrazole with axial chirality was synthesized. Partial resolution was achieved using (S)‐proline and methylbenzylamine as the resolving agents. Best results were obtained using methylbenzylamine with 75–85% ee. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:416–419, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20241     

Spectrophotometric determination of fluoxetine by batch and flow injection methods

A rapid, simple, and accurate spectrophotometric method is presented for the determination of fluoxetine by batch and flow injection analysis methods. The method is based on fluoxetine competitive complexation reaction with phenolphthalein-beta-cyclodextrin (PHP-beta-CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of fluoxetine was measured. The formation constant for fluoxetin-beta-CD was calculated by non-linear least squares fitting. Fluoxetine can be determined in the range 7.0 x 10(-6)-2.4 x 10(-4) mol l(-1) and 5.0 x 10(-5)-1.0 x 10(-2) mol l(-1) by batch and flow methods, respectively. The limit of detection and limit of quantification were respectively 4.13 x 10(-6) mol l(-1) and 1.38 x 10(-5) mol l(-1) for batch and 2.46 x 10(-5) mol l(-1) and 8.22 x 10(-5) mol l(-1) for flow method. The sampling rate in flow injection analysis method was 80+/-5 samples h(-1). The method was applied to the determination of fluoxetine in pharmaceutical formulations and after addition to human urine samples.     

Production study of high specific activity NCA Re-186g by proton and deuteron cyclotron irradiation

Very high specific activity (A_S) ^186gRe could be produced by either proton or deuteron cyclotron irradiation on highly enriched ¹⁸⁶W target in no-carrier-added (NCA) form, leading to a A_S very close to the theoretical carrier free (CF) value of 6.88 GBq μg⁻¹. Thick Target Yields (TTYs), obtained irradiating both thick metal W targets of natural isotopic composition and highly enriched powdered ¹⁸⁶W targets, were measured at different particles energies taking into account high accuracy and precision. The evaluation of radionuclidic purities of ^186gRe obtained activating highly enriched ¹⁸⁶W by both p and d were also carried out and accurately compared. The thin-target excitation functions for all Re (A = 181, 182, 183, 184, 186 and their metastable levels), and W and Ta coproduced radionuclides will be presented elsewhere in deep details.     

Preconcentration and spectrophotometric determination of low concentrations of malachite green and leuco-malachite green in water samples by high performance solid phase extraction using maghemite nanoparticles

A novel and sensitive extraction procedure using maghemite nanoparticles (γ-Fe₂O₃) modified with sodium dodecyl sulfate (SDS), as an efficient solid phase, was developed for removal, preconcentration and spectrophotometric determination of trace amounts of malachite green (MG) and leuco-malachite green (LMG). Combination of nanoparticle adsorption and easily magnetic separation was used to extraction and desorption of MG and LMG. The adsorption capacity was evaluated using both the Langmuir and Freundlich adsorption isotherm models. Maghemite nanoparticles were prepared by co-precipitation method and their surfaces were modified by SDS. The size and properties of the produced maghemite nanoparticles was determined by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and BET analysis. MG and LMG became adsorbed at pH 3.0. LMG was oxidized to MG by adsorption on maghemite nanoparticles. The adsorbed MG was then desorbed and determined spectrophotometrically. The calibration graph was linear in the range 0.50-250.00 ng mL⁻¹ of MG and LMG with a correlation coefficient of 0.9991. The detection limit of the method for determination of MG was 0.28 ng mL⁻¹ and the relative standard deviation (R.S.D.) for 10.00 and 50.00 ng mL⁻¹ of malachite green was 1.60% (n = 3) and 0.86% (n = 5), respectively. A preconcentration factor of 50 was achieved in this method. The Langmuir adsorption capacity (q_max) was found to be 227.3 mg g⁻¹ of the adsorbent. The method was applied to the determination of MG in fish farming water samples.     

Single-walled carbon nanotubes as solid-phase microextraction adsorbent for the determination of low-level concentrations of butyltin compounds in seawater

Carbon nanotubes are a kind of new carbon-based nanomaterials, which have drawn great attention in many application fields. The potential of single-walled carbon nanotubes (SWCNTs) as solid-phase microextraction (SPME) adsorbent for the preconcentration of environmental pollutants has been investigated in recent years. In the present study, the feasibility of SWCNTs as SPME adsorbent for the determination of monobutyltin, dibutyltin and tributyltin in seawater samples was studied. To achieve this aim, the potential factors affecting the SPME efficiency, including extraction time, extraction temperature, desorption time, desorption temperature, and salinity were optimized. The developed method showed good performance according to the ICH (International Conference on Harmonization of Technical Requirements for Analytical Methods) criteria. The acquired calibration curves were linear (r ≥ 0.992) over the concentration range from ≤12 to 2000 ng L⁻¹. For all of the analytes, the limit of detection at signal-to-noise ratio of 3 was below 5 ng L⁻¹. Furthermore, in comparison with the commercial carboxen/polydimethylsiloxane fiber, the developed SWCNT fiber showed better thermal stability (over 350 °C) and longer life span (over 150 times). The application of the proposed method in environmental analyses was shown by analyzing seawater samples from the harbors on the Persian Gulf for butyltin residues. Some of the butyltins were detected in the analyzed samples. Results of the present study demonstrate the feasibility of the SWCNTs as SPME adsorbent for the determination of butyltins in seawater samples.     

Heat-resistant and soluble fluorinated poly(amide imide)s based on non-coplanar ortho-linked diimide-dicarboxylic acid

A series of novel fluorinated heat-resistant poly(amide imide)s (PAIS) based on non-coplanar diimide-diacid monomer (DIDA) were synthesized and characterized. The poly(amide imide)s were obtained in high yields and possessed inherent viscosities in the range of 0.47-0.91 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinoned, dimethyl sulfoxide, N,N-dimethylformamide, pyridine and tetrahydrofuran. Glass transition temperatures were in the range of 221-263 °C, as determined by differential scanning calorimetry. Degradation temperatures for 10% weight loss occurred all above 520 °C and char yields was more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.58-1.59), birefringence (Δn = 0.008-0.013), and dielectric constants (? ≈ 2.5) due to the trifluoromethyl pendent groups and ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

Form of multicomponent Fickian diffusion coefficients matrix

The form of multicomponent Fickian diffusion coefficients matrix in thermodynamically stable mixtures is established based on the form of phenomenological coefficients and thermodynamic factors. While phenomenological coefficients form a symmetric positive definite matrix, the determinant of thermodynamic factors matrix is positive. As a result, the Fickian diffusion coefficients matrix has a positive determinant, but its elements — including diagonal elements — can be negative. Comprehensive survey of reported diffusion coefficients data for ternary and quaternary mixtures, confirms that invariably the determinant of the Fickian diffusion coefficients matrix is positive.     

Synthesis, characterization and fluorescent property evaluation of 1,3,5-triaryl-2-pyrazolines

A series of 1,3,5-triaryl-2-pyrazolines was synthesized by dissolving the corresponding 4-alkoxychalcones in glacial acetic acid containing a few drops of concentrated hydrochloric acid. This step was followed by the addition of (3,4-dimethylphenyl) hydrazaine hydrochloride. Finally the target compounds were precipitated by pouring the reaction mixture onto crushed ice. The structures of the synthesized compounds were established by physicochemical and spectroscopic methods. The 1,3,5-triaryl-2-pyrazolines bearing homologous alkoxy groups were found to possess fluorescence properties in the blue region of the visible spectrum when irradiated with ultraviolet radiation. The fluorescent behavior of these compounds was studied by UV-Vis and emission spectroscopy, performed at room temperature.     

Synthesis, experimental and theoretical characterization of N,N'-dipyridoxyl (1,4-butanediamine) Schiff-base ligand and its Cu(II) complex

A new N,N'-dipyridoxyl(1,4-butanediamine) [=H(2)BS] Schiff-base ligand and its Cu(II) salen complex, [Cu(BS)(H(2)O)(CH(3)OH)], were synthesized and characterized by IR, UV-vis, (1)H NMR, mass spectrometry and elemental analysis. Also, full optimization of the geometries, (1)H NMR chemical shifts (for the H(2)BS) and vibrational frequencies were calculated by using density functional theory (DFT) method. Structure of the H(2)BS ligand is not planar, i.e. two pyridine rings are not in the same plane. In the structure of the Cu complex, the Schiff-base ligand acts as a dianionic tetradentate ligand in N, N, O(-), O(-) manner. The coordinating atoms of BS(2-) occupy equatorial positions of the octahedral complex, where the H(2)O and CH(3)OH ligands locate at axial positions. The calculated results are in good agreement with the experimental data, confirming the suitability of the proposed and optimized structures for the H(2)BS ligand and its Cu complex.