Optical waveguide sensor for on-line monitoring of bacteria

A grating-coupled planar optical waveguide sensor is presented for sensing of bacteria by evanescent waves. The waveguide design results in increased depth of penetration into the sample volume, which makes it suitable for detecting micrometer-sized biological objects. We tested the sensor's performance by monitoring the adhesion of Escherichia coli K12 cells to the sensor surface.     

Coherent anti-Stokes Raman scattering microscopy with a photonic crystal fiber based light source

A coherent anti-Stokes Raman scattering microscope based on a Ti:sapphire femtosecond oscillator and a photonic crystal fiber is demonstrated. The nonlinear response of the fiber is used to generate the additional wavelength needed in the Raman process. The applicability of the setup is demonstrated by imaging of micrometer-sized polystyrene beads.     

High-power intracavity frequency doubling of a Ti:sapphire femtosecond oscillator

We demonstrate intracavity frequency doubling of a standard femtosecond Ti:sapphire oscillator. The cavity is extended with a pair of focusing mirrors and a 0.5-mm-thick BBO crystal. We achieve a repetition rate of 50 MHz and simultaneously generate 22 mW of 55-fs pulses at 810 nm and 200 mW of 73-fs pulses at 405 nm, which corresponds to 4 nJ per pulse. We create a total of 330-mW, 405-nm light when pumping the Ti:sapphire crystal with 5.7 W from an Ar-ion laser, corresponding to a conversion efficiency of 5.7%. No saturation is found, which implies that higher outputs can be achieved with higher pump rates. Preliminary results from the use of blue pulses as pump in an optical parametric amplifier seeded by pulses from a photonic crystal fiber are presented. Received: 27 January 2003 / Revised version: 27 March 2003 / Published online: 12 May 2003 RID="*" ID="*"Corresponding author. Fax: +45-861/96199, E-mail: tva@chem.au.dk     

Structural stability and optical properties of nanomaterials with reconstructed surfaces

We present density functional and quantum Monte Carlo calculations of the stability and optical properties of semiconductor nanomaterials with reconstructed surfaces. We predict the relative stability of silicon nanostructures with reconstructed and unreconstructed surfaces, and we show that surface step geometries unique to highly curved surfaces dramatically reduce the optical gaps and decrease excitonic lifetimes. These predictions provide an explanation of both the variations in the photoluminescence spectra of colloidally synthesized nanoparticles and observed deep gap levels in porous silicon.     

Anechoic chamber qualification: traverse method,inverse square law analysis method,and nature of test signal

Qualification of anechoic chambers is intended to demonstrate that the chamber supports the intended free-field environment within some permissible tolerance bounds. Key qualification issues include the method used to obtain traverse data, the analysis method for the data, and the use of pure tone or broadband noise as the chamber excitation signal. This paper evaluates the relative merits of continuous versus discrete traverses, of fixed versus optimal reference analysis of the traverse data, and of the use of pure tone versus broadband signals. The current practice of using widely space discrete sampling along a traverse is shown to inadequately sample the complexity of the sound field extant with pure tone traverses, but is suitable for broadband traverses. Continuous traverses, with spatial resolution on the order of 15% of the wavelength at the frequency of interest, are shown to be necessary to fully resolve the spatial complexity of pure tone qualifications. The use of an optimal reference method for computing the deviations from inverse square law is shown to significantly improve the apparent performance of the chamber for pure tone qualifications. Finally, the use of broadband noise as the test signal, as compared to pure tone traverses over the same span, is demonstrated to be a marginal indicator of chamber performance.     

Rapidity dependence of charged antihadron to hadron ratios in Au+Au collisions at sqrt[s(NN)]=200 GeV

We present ratios of the numbers of charged antihadrons to hadrons (pions, kaons, and protons) in Au+Au collisions at sqrt[s(NN)]=200 GeV as a function of rapidity in the range y=0-3. While the ratios at midrapidity are approaching unity, the K(-)/K(+) and p;/p ratios decrease significantly at forward rapidities. An interpretation of the results within the statistical model indicates a reduction of the baryon chemical potential from mu(B) approximately 130 MeV at y=3 to mu(B) approximately 25 MeV at y=0.     

Titanium dipyrrolylmethane derivatives: rapid intermolecular alkyne hydroamination

Alkynes are rapidly hydroaminated by primary amines using titanium dipyrrolylmethane derivatives as catalyst.     

Carbon dioxide induced separation of ionic liquids and water

Both hydrophobic and hydrophilic room-temperature ionic liquids can be separated from aqueous solutions with relatively low-pressure gaseous carbon dioxide.     

Programmable modification of cell adhesion and zeta potential in silica microchips

Spatial patterning of thin polyacrylamide films bonded to self-assembled monolayers on silica microchannels is described as a means for manipulating cell-adhesion and electroosmotic properties in microchips. Streaming potential measurements indicate that the zeta potential is reduced by at least two orders of magnitude at biological pH, and the adhesion of several kinds of cells is reduced by 80-100%. Results are shown for cover slides and in wet-etched silica microchannels. Because the polyacrylamide film is thin and transparent, this film is consistent with optical manipulation of cells and detection of cell contents. The spatial patterning technique is straightforward and has the potential to aid on-chip analysis of single adherent cells.     

Relations between 77Se NMR chemical shifts of (phenylseleno)-benzenes and their molecular structures derived from nine X-ray crystal structures

An extensive library of 77Se chemical shifts have been generated from the NMR measurements on substituted (phenylseleno)benzenes, including 33 new compounds. The variation in chemical shifts cover 265 ppm ranging from 446 to 181 ppm. Crystal structures have been determined for nine selected representatives of the substituted (phenylseleno)-benzenes. The analysis of the crystal structures supported that through-space interactions between selenium and the ortho-substituent observed in the crystal structures also are likely to be present in solution. The variation in the 77Se NMR chemical shifts can be rationalised from the intramolecular interactions with the substituent in the ortho-position. Furthermore it appears that these ortho-effects are roughly additive, and that it is the actual interactions and not the resulting conformational constraints that are responsible for the variations in the 77Se NMR chemical shifts.