Influence of boric acid on the determination of iron in reactor coolant water by graphite furnace atomic absorption spectrometry

Summary The matric effect of boric acid was investigated in the determination of iron in the primary circuit coolant water of nuclear power plants by furnace atomic absorption spectrometry. The effect of boric acid was of particular interest. The method was applied during refuelling and maintenance periods and the results were used to interpret the chemical changes in the water.

---

Einfluß von Borsäure auf die Bestimmung von Eisen in Reaktorkühlwasser durch GF-AAS

     

Measurements of circular polarization correlations following excitation of Ar and Kr by electron impact

We report measurements of the circular polarization correlation parameterP ₃ for the excitation of the 4s′[1/2] _j=1 state in Ar by 40 eV electrons and for the excitation of the Kr 5s[3/2] _J=1 state by 30 eV electrons at electron scattering angles up to 50°. The measured Ar data are compared to predictions of a distorted wave Born approximation (DWBA). The agreement is in general not very good with theory predictingP ₃ values considerably larger than the measured values in the regime of small scattering angles. In Kr, where the measured data are compared to theoretical predictions from a DWBA, a first-order many-body theory (FOMBT) and a relativistic distorted wave theory (RDW), the level of agreement between experiment and theory is somewhat better. The measuredP ₃ parameters in conjunction with the previously measured linear coherence parametersP ₁ undP ₂ under the same scattering conditions yield the total polarizationP _tot ⁺ which is a measure for the level of coherence in the excitation process. In both cases studied here, we found values of eliminateP _tot ⁺ that were consistent with a fully coherent excitation process.     

A Chiral Coordination Polymer of Silver(I) with Saccharinate and Pyridine: Synthesis,Spectral, Thermal,and Structural Characterization of [Ag(sac)(py)]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript>

The first silver(I) complex of saccharinate (sac) with pyridine (py), [Ag(sac)(py)]_n has been synthesized and characterized by elemental analysis, IR spectroscopy and single crystal X-ray diffractometry. The complex crystallizes in chiral, trigonal space group P3₁21 (No. 152) with unit cell parameters of a = 11.2605(2) Å, c = 17.3300(4) Å, V = 1903.02(6) ų and Z = 6. [Ag(sac)(py)]_n contains monomeric [Ag(sac)(py)] units linked into infinite helices by way of Ag⋅sAg interactions [d(Ag⋅sAg) = 2.909(2) and 2.985(1) Å]. The distorted square-planar environment of Ag is completed by an N-bonded sac [Ag—N = 2.084(2) Å] and a py molecule [Ag—N = 2.116(2) Å]. The N_sac—Ag—N_py angle is 173.85(10)^∘. The one-dimensional chains are crosslinked by C—H⋅sO interactions involving the carbonyl and sulfonyl O atoms of sac and aromatic-ring hydrogen atoms of both sac and py. The thermal stability of the title complex was investigated using thermogravimetry and differential thermal analysis in a static atmosphere of air. The first decomposition stage between 90 and 160^∘C corresponds to removal of the py molecule in a single stage, while the degradation of the sac moiety occurs at two stages in the temperature range 370–515^∘C, giving an end product of metallic Ag.     

Time-resolved enzymatic determination of glucose using a fluorescent europium probe for hydrogen peroxide

An enzymatic assay for glucose based on the use of the fluorescent probe for hydrogen peroxide, europium(III) tetracycline (EuTc), is described. The weakly fluorescent EuTc and enzymatically generated H₂O₂ form a strongly fluorescent complex (EuTc–H₂O₂) whose fluorescence decay profile is significantly different. Since the decay time of EuTc–H₂O₂ is in the microseconds time domain, fluorescence can be detected in the time-resolved mode, thus enabling substantial reduction of background fluorescence. The scheme represents the first H₂O₂-based time-resolved fluorescence assay for glucose not requiring the presence of a peroxidase. The time-resolved assay (with a delay time of 60 s and using endpoint detection) enables glucose to be determined at levels as low as 2.2 mol L^–1, with a dynamic range of 2.2–100 mol L^–1. The method also was adapted to a kinetic assay in order to cover higher glucose levels (mmol L^–1 range). The latter was validated by analyzing spiked serum samples and gave a good linear relationship for glucose levels from 2.5 to 55.5 mmol L^–1. Noteworthy features of the assay include easy accessibility of the probe, large Stokes shift, a line-like fluorescence peaking at 616 nm, stability towards oxygen, a working pH of approximately 7, and its suitability for both kinetic and endpoint determination.     

Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.     

Tri-component diblock copolymers of poly(ethylene glycol)–poly(ε-caprolactone-<Emphasis Type="Italic">co</Emphasis>-lactide): synthesis,characterization and loading camptothecin

Biodegradable tri-component diblock copolymer was synthesized by bulk copolymerization of ε-caprolactone (CL) and D, L-lactide (LA) in the presence of methoxy poly(ethylene glycol) (MePEG), using stannous octoate as catalyst. Their chemical structure and physical properties were investigated by GPC, NMR, DSC, TGAand XRD. The increase of CL/LA ratio in the diblock copolymer leads to lower T _g, higher decomposition temperature and crystallinity. Nanoparticles formulated from MePEG–poly(CL-co-LA) (PCAE) possess spherical structure, which was characterized by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The DLS results indicate that the particle size increased with the increase of CL/LA ratio and the hydrophobic fragment length in the copolymer. The drug encapsulation efficiency and the drug release behavior in vitro conditions of camptothecin were measured by high performance liquid chromatography (HPLC). The encapsulation efficiency can be achieved as high as 84.4% and the release behavior can be made well-controlled. MePEG–poly(CL-co-LA) nanoparticles might have a great potential as carriers for hydrophobic drugs.     

Five-coordinate Cobalt(II), Nickel(II) and Zinc(II) Complexes Derived from 2-pyridine-2-yl-3-(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one. The Crystal Structure of the Cobalt(II) Complex

The synthesis of cobalt(II), nickel(II) and zinc(II) complexes of 2-pyridine-2-yl-3(pyridine-2-carboxylideneamino)-1,2-dihydroquinazolin-4(3H)-one is described. The ligand and metal complexes were characterized by elemental analysis, conductivity measurements, spectral (u.v.–vis., i.r., 1D n.m.r., 2D hetcor and mass) and thermal studies. The cobalt(II) complex crystallizes as pink crystals in the monoclinic crystal system, space group P21/n with a = 10.066(6) Å, b = 15.929(9) Å, c = 12.624(7) Å, α = 90.00(9)°, β = 110.850 (8)°, γ = 90.00, V = 1891.5 (18) ų and Z = 4. The geometry around the cobalt atom is distorted trigonal bipyramidal with τ = 0.83 [structural parameter, τ = (β − α)/60; where α and β are the two basal angles in a five coordinate complex].     

AFM of adsorbed polyelectrolytes on cellulose I surfaces spin-coated on silicon wafers

Thin layers of cellulose I nanocrystals were spin-coated onto silicon wafers to give a flat model cellulose surface. A mild heat treatment was required to stabilize the cellulose layer. Interactions of this surface with polyelectrolyte layers and multilayers were probed by atomic force microscopy in water and dilute salt solutions. Deflection–distance curves for standard silicon nitride tips were measured for silicon, cellulose-coated silicon, and for polyelectrolytes adsorbed on the cellulose surface. Transfer of polymer to the tip was checked by running deflection–distance curves against clean silicon. Deflection–distance curves were relatively insensitive to adsorbed polyelectrolyte, but salt addition caused transfer of cationic polyelectrolyte to the tip, and swelling of the polyelectrolyte multilayers.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.