Synthesis, characterization, and ion-exchange properties of colloidal zeolite nanocrystals

Here, we present physical–chemical properties of Linde type A (LTA) zeolite crystals synthesized via conventional hydrothermal and microwave heating methods. Both heating methods produced LTA crystals that were sub-micron in size, highly negatively charged, super-hydrophilic, and stable when dispersed in water. However, microwave heating produced relatively narrow crystal size distributions, required much shorter heating times, and did not significantly change composition, crystallinity, or surface chemistry. Moreover, microwave heating allowed systematic variation of crystal size by varying heating temperature and time during the crystallization reaction, thus producing a continuous gradient of crystal sizes ranging from about 90 to 300 nm. In ion-exchange studies, colloidal zeolites exhibited excellent sorption kinetics and capacity for divalent metal ions, suggesting their potential for use in water softening, scale inhibition, and scavenging of toxic metal ions from water.     

Influence of TiO2 nanotube morphology and TiCl4 treatment on the charge transfer in dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) were fabricated using TiO₂ nanoparticles (NPs), TiO₂ nanotube arrays (NTAs), and surface-modified NTAs with a TiCl₄ treatment. The photovoltaic efficiencies of the DSSCs using TiO₂ NP, NTA, and TiCl₄-treated NTA electrodes are 4.25, 4.74, and 7.47 %, respectively. The highest performance was observed with a TiCl₄-treated TiO₂ NTA photoanode, although in the case of the latter two electrodes, the amounts of N719 dye adsorbed were similar and 68 % of that of the NP electrode. Electrochemical impedance measurements show that the overall resistance, including the charge–transfer resistance, was smaller with NTA morphologies than with NP morphologies. We suggest that a different electron transfer mechanism along the one-dimensional nanostructure of the TiO₂ NTAs contributes to the smaller charge–transfer resistance, resulting in a higher short circuit current (J _sc), even at lower dye adsorption. Furthermore, the TiCl₄-treated NTAs showed even smaller charge–transfer resistance, resulting in the highest J _sc value, because the downward shift in the conduction band edge improves the electron injection efficiency from the excited dye into the TiCl₄-treated TiO₂ electrodes.     

Progressive formation of fine and coarse ripples on SiC surface by repeated irradiation of femtosecond laser pulses

In this work, we report the progressive formation of first nanoparticles, next fine ripples, and eventually coarse ripples during the irradiation of single-crystal 6H-SiC surfaces with increasing number of femtosecond laser pulses (λ = 515 nm, τ = 250 fs, repetition rate = 100 kHz). At laser fluences greater than the single-pulse ablation threshold, nanoparticles were produced on the surface by the first few pulses over which fine ripple patterns overlapped at increased pulse numbers. As the pulse number was further increased over ten, the surface was gradually transformed into a coarse ripple–covered one. At laser fluence below the threshold, however, only fine ripples were formed nonuniformly.     

Machine learning identification of symmetrized base states of Rydberg atoms

Studying the complex quantum dynamics of interacting many-body systems is one of the most challenging areas in modern physics. Here, we use machine learning (ML) models to identify the symmetrized base states of interacting Rydberg atoms of various atom numbers (up to six) and geometric configurations. To obtain the data set for training the ML classifiers, we generate Rydberg excitation probability profiles that simulate experimental data by utilizing Lindblad equations that incorporate laser intensities and phase noise. Then, we classify the data sets using support vector machines (SVMs) and random forest classifiers (RFCs). With these ML models, we achieve high accuracy of up to 100% for data sets containing only a few hundred samples, especially for the closed atom configurations such as the pentagonal (five atoms) and hexagonal (six atoms) systems. The results demonstrate that computationally cost-effective ML models can be used in the identification of Rydberg atom configurations.     

Coherent manipulation of electronic States in a double quantum dot

We investigate coherent time evolution of charge states (pseudospin qubit) in a semiconductor double quantum dot. This fully tunable qubit is manipulated with a high-speed voltage pulse that controls the energy and decoherence of the system. Coherent oscillations of the qubit are observed for several combinations of many-body ground and excited states of the quantum dots. Possible decoherence mechanisms in the present device are also discussed.     

Anti‐Inflammatory Activity of a Novel Acetylene Isolated from the Roots of Angelica tenuissima Nakai

Three polyacetylenes, one novel and two known, were isolated from the root of Angelica tenuissima. Using ¹H‐ and ¹³C‐NMR, COSY, HMBC, and HMQC, their structures were found to be (3R,8S)‐heptadeca‐1‐en‐4,6‐diyne‐3,8‐diol ( 1 ), falcarindiol ( 2 ), and oplopandiol ( 3 ). Absolute configurations of compound 1 were established using Mosher's esterification. In addition, the polyacetylenes ( 1 – 3 ) were evaluated for their anti‐inflammatory activity. Compounds 1 and 3 showed potent inhibitory activity against lipopolysaccharide‐induced nitric oxide (NO) production in RAW267.7 macrophage cells with IC₅₀ values of 4.31 and 5.06 μm, respectively. Compound 1 strongly inhibited inducible nitric oxide synthase (iNOS) and cyclooxygenase (COX)‐2 in a concentration‐dependent manner.     

Heritability and linkage study on heart rates in a Mongolian population

Elevated heart rate has been proposed as an independent risk factor for cardiovascular diseases, but their interrelationships are not well understood. In this study, we performed a genome-wide linkage scan in 1,026 individuals (mean age 30.6 years, 54.5% women) from 73 extended families of Mongolia and determined quantitative trait loci that influence heart rate. The DNA samples were genotyped using deCODE 1,039 microsatellite markers for 3 cM density genome-wide linkage scan. Correlation analysis was carried out to evaluate the correlation of the covariates and the heart rate. T-tests of the heart rate were also performed on sex, smoking and alcohol intake. Consequently, this model was used in a nonparametric genome-wide linkage analysis using variance component model to create a multipoint logarithm of odds (LOD) score and a corresponding P value. In the adjusted model, the heritability of heart rate was estimated as 0.32 (P<.0001) and a maximum multipoint LOD score of 2.03 was observed in 77 cM region at chromosome 18. The second largest LOD score of 1.52 was seen on chromosome 5 at 216 cM. Genes located on the specified locations in chromosomes 5 and 18 may be involved in the regulation of heart rate.     

On the role of oxygen in fabricating microfluidic channels with ultraviolet curable materials

We present the effects of oxygen on the irreversible bonding of a microchannel using an ultraviolet (UV) curable material of polyurethane acrylate (PUA). Microchannels were fabricated by bonding a top layer with impressions of a microfluidic channel and a bottom layer consisting of a PUA coating on a glass or a polyethylene terephthalate (PET) film substrate. The resulting channel is a homogeneous conduit of the PUA material. To find optimal bonding conditions, the bottom layer was cured under different oxygen concentration and UV exposure time at a constant UV intensity (10 mW cm(-2)). Our experimental and theoretical studies revealed that the channel bonding is severely affected by the concentration of oxygen either in the form of trapped air or permeated air out of the channel. In addition, an optimal UV exposure time is needed to prevent clogging or non-bonding of the channel.     

Electronic structure and magnetism in transition metals doped 8-hydroxy-quinoline aluminum

We report the room-temperature ferromagnetism in transition metals (Co, Ni)-doped 8-hydroxy-quinoline aluminum (Alq3) by thermal coevaporation of high purity metal and Alq3 powders. For 5% Co-doped Alq3, a maximum magnetization of approximately 0.33 microB/Co at 10 K was obtained and ferromagnetic behavior was observed up to 300 K. The Co atoms interact chemically with O atoms and provide electrons to Alq3, forming new states acting as electron trap sites. From this, it is suggested that ferromagnetism may be associated with the strong chemical interaction of Co atoms and Alq3 molecules.     

Tuning Local Coordination Environments of Manganese Single-Atom Nanozymes with Multi-Enzyme Properties for Selective Colorimetric Biosensing

Single-atom nanozymes (SAzymes) are promising in next-generation nanozymes, nevertheless, how to rationally modulate the microenvironment of SAzymes with controllable multi-enzyme properties is still challenging. Herein, we systematically investigate the relationship between atomic configuration and multi-enzymatic performances. The constructed Mn_SA−N₃-coordinated SAzymes (Mn_SA−N₃−C) exhibits much more remarkable oxidase-, peroxidase-, and glutathione oxidase-like activities than that of Mn_SA−N₄−C. Based on experimental and theoretical results, these multi-enzyme-like behaviors are highly dependent on the coordination number of single atomic Mn sites by local charge polarization. As a consequence, a series of colorimetric biosensing platforms based on Mn_SA−N₃−C SAzymes is successfully built for specific recognition of biological molecules. These findings provide atomic-level insight into the microenvironment of nanozymes, promoting rational design of other demanding biocatalysts.