透过式光纤陀螺偏振特性的分析

偏振波动是谐振式光纤陀螺(R-FOG)的主要噪声之一,它对信号检测精度具有重要影响。通过矩阵法得到了透过式R-FOG中由偏振波动引起的系统零漂与偏振噪声相关参数、环形谐振腔结构参数间的关系表达式。在一定的透过式R-FOG系统结构参数下,对上述解析表达式进行了数值拟合,通过估算可满足高精度透过式R-FOG系统对偏振相关参数的要求,为偏振波动噪声的理论分析和R-FOG系统的实际搭建提供了理论基础。     

Preparation and characterization of nickel hydroxide microspheres assembled by nanoribbons

Abstract  

This article describes a facile green strategy for preparing the Ni(OH)₂ microsphere assembled by nanoribbons by the template of the squama inner coat of onion at mild condition. The method is simple and effective. The results of SEM show the products are Ni(OH)₂ microspheres with diameters in the range of 500–2,500 nm. The results of TEM show the microsphere is assembly by nanoribbons, with thickness in the range of 30–50 nm. The products were characterized by powder X-ray diffraction, IR, and thermogravimetric analysis. A possible formation mechanism was also proposed.     

Z-扫描参量对薄膜材料三阶非线性光学特性的影响

采用数值计算方法对薄膜材料的Z-扫描参量进行研究.对不同激光脉宽下Z-扫描的三阶非线性折射系数和吸收系数进行分析,结果显示不同等级的脉宽激光器对计算结果的数量级影响很大.对不同小孔光阑半径的Z-扫描闭孔曲线进行仿真,结果显示光阑小孔越小,获得特征曲线的峰谷值越明显.对不同光阑离透镜焦点的距离值进行Z-扫描闭孔曲线仿真,结果显示距离为1/2透镜焦距值时闭孔Z-扫描曲线能得到相对较大的峰谷差值.数值分析结果与相关文献报道的实验结果基本一致.     

Graphene-based passively Q-switched Nd:KLu(WO4)2 eye-safe laser operating at 1,425 nm

With graphene as saturable absorber, an Nd:KLu(WO₄)₂ eye-safe laser operating at 1,425 nm is demonstrated. To the best of our knowledge, this is the first demonstration that an Nd:KLu(WO₄)₂ laser operates at the eye-safe 1.4-μm region. A maximum total average output power of 170 mW is obtained under the pump power of 9.6 W, corresponding to an optical–optical efficiency of 1.77 %. The minimum pulse width and the highest pulse repetition rate are 153 ns and 97 kHz, respectively. Also the characteristics of the graphene used as saturable absorber for a 1.4-μm laser were studied for the first time.     

贴片电阻表面缺陷自动识别方法

贴片电阻生产过程中的缺陷主要依靠人工在显微镜下检测,速度慢、长期成本高、误检率高.针对贴片电阻单元具有排列整齐、结构简单、图像灰度级少的特点,在贴片电阻图像二值化、边缘提取、直线检测基础上,以相邻电阻单元的相关系数作为电阻缺陷判别依据,提出基于子图投影匹配的快速缺陷检测方法.采用主分量分析法压缩图像数据量,提取缺陷特征,以基于支持向量机对贴片电阻缺陷进行分类并建立实验系统.缺陷检测及识别实验表明,缺陷检测正确率为92.5oo,算法的快速性和识别准确度满足系统快速高精的要求.     

FAIR项目Super-FRS超导二极磁铁测试线圈的三维失超数值模拟

国际反质子与离子研究装置(FAIR)项目中的Super-FRS超导二极磁铁是一个大型温铁结构的超导磁体,由中国负责设计、研制和测试。为了研究超导线圈的性能和其设计的可靠性,前期研制了一个测试线圈。建立了一个基于ANSYS和OPERA 3D的三维失超模型,不仅将模拟结果和实验数据进行对比,更可以获得失超过程的更多细节。模型将环氧浸渍的超导线圈简化为各项异性连续介质。将ANSYS求解器用于瞬态传热过程的分析,OPERA 3D用于磁场计算,并采用ANSYS脚本语言（APDL）进行焦耳热的计算和保护电路方程的求解。模拟得到了温度、电压、电流随时间的变化曲线和失超传播过程。最后将模拟结果和测试线圈的测试结果进行了比较。     

Lepton-number-violating decays of singly-charged Higgs bosons in the type-(Ⅰ+Ⅱ) seesaw model

The lepton-number-violating decays of singly-charged Higgs bosons H± are investigated in the minimal type-(Ⅰ+Ⅱ) seesaw model with one SU(2)L Higgs triplet Δ and one heavy Majorana neutrino N1 at the TeV scale.We find that the branching ratios B(H+ → lα+ ν)(for α = e,μ,τ) depend not only on the mass and mixing parameters of three light neutrinos νi(for i=1,2,3) but also on those of N1.Assuming that the mass of N1 lies in the range of 200 GeV to 1 TeV,we figure out the generous interference bands for the contributions of νi and N1 to B(H+ →lα+ ν).We illustrate some salient features of such interference effects by considering three typical mass patterns of νi,and show that the relevant Majorana CP-violating phases can affect the magnitudes of B(H+ →l+αν) in this parameter region.     

蒸汽活化提高脱硫剂钙利用率的实验研究

本文用小型热态流化床实验台对以ＣａＯ为主要成分的钙基脱硫剂石灰乏吸收剂在１５０～６００℃的温度范围内进行了蒸汽活化处理,进而实验研究了这种处理对提高脱硫剂钙利用率的效果。结合化学成分分析和Ｘ射线衍射的结果初步探讨了蒸汽活化的机理。研究表明,脱硫剂对水蒸汽的物理吸附明显受活化温度的影响,蒸汽活化后的钙利用率提高显著,可能存在一个最佳活化时间。     

磁流变体流变学特性研究

对所研制的矿物油介质和硅油介质磁流变体样品的零场粘度、磁流变性能、示功及速度特性进行了系统的测试和分析,并对其影响因素进行了详细的讨论。研制的磁流变体零场粘度小于0．5Pas(γ=81s^-1)且具有良好的粘温特性;磁流变体的剪切应力接近和超过70kPa(B＝6000Gs);在智能减振器的应用试验中获得理想的示功特性曲线。     

空腔靶能量吸收,转换特性实验研究

本文介绍空腔靶设计的物理思想、及能量吸收特性、X光转换特性和堵腔特性的实验研究方法,给出了实验观察到的一系列物理现象,通过对现象的分析而得出空腔靶的能量吸收和X光转换明显优于平面靶;利用相对孔径较大的聚焦透镜打空腔靶有利于改善靶的能量吸收和转换特性的结论。