Synthesis of 2,2＇-（Substituted Arylmethylene）bis（1,6,6-trimethyl 6,7,8,9-tetrahydrophenanthro[1,2-b]furan-10,11-dione） Derivatives

The reactions of tanshinone IIA with aromatic aldehydes have been investigated and several 2, T-（substituted arylmethylene） bis （1,6,6-trimethyl-6,7,8,9-tetrahydrophenanthro[1,2-b]- furan- 10, 11-dione） derivatives were obtained,     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。     

微孔[Me4N]2HgGe4S10的溶剂热合成与表征

用溶剂热方法合成了[Me₄N]₂HgGe₄S₁₀, 通过单晶X射线衍射, IR, DSC-TG手段对其进行了表征. 结果表明, 标题化合物属四方晶系, I-4空间群, 晶胞参数a＝0.92687(8) nm, c＝1.43739(12) nm, V＝1.23484(18) nm³, Z＝2, Mo Kα λ＝0.071073 nm, R₁＝0.0570, wR₂＝0.1374, 空旷骨架结构由超四面体Ge₄S₁₀与HgS₄四面体共用顶点连接而成, 有机模板离子在一维孔道中. 该化合物具有一定的热稳定性, 在320 ℃发生分解形成GeS₂.     

超声条件下芳基格氏试剂与4-烷基苯乙酮的反应

二芳基乙烯;超声条件下芳基格氏试剂与4-烷基苯乙酮的反应     

链状[NH3CH2CH2NH3]AgAsS4的溶剂热合成及表征

利用溶剂热方法合成了链状[NH3CH2CH2NH3]AgAsS4,通过单晶X射线衍射技术对其进行了晶体结构分析,该化合物晶体属单斜晶系,空间群C2/c,晶胞参数a=1.35805(8)nm,b=0.65331(3)nm,c=2.27711(9)nm,β=106.42(3)°,Z=8.化合物具有有趣的梯子状双链结构,该阴离子链由AsS4与AgS3共用顶点交替连接而成,有机阳离子在阴离子链之间存在较强的N—H…S氢键.DSC和Tg分析结果表明化合物在200℃以下是稳定的.     

(EnH2)2Ge2S6的合成与结构表征

用溶剂热方法制备了(EnH2)2Ge2S6单晶.单晶X射线衍射分析结果表明,(EnH2)2Ge2S6属单斜晶系,P2(1)/n空间群,晶胞参数a=0.67125(5)nm,b=1.12290(4)nm,c=1.07518(4)nm,β=92.288(2)°,Z=2.利用DSC及TG分析研究了其热稳定性,结果表明,该化合物在200℃以下能够稳定存在.     

F-T合成Fe/Cu/K/Al2O3催化剂的结构性质、还原及碳化行为

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/Al2O3催化剂, 结合TG、N2物理吸附、XRD、H2-TPR、CO-TPR、Mossbauer谱等表征手段, 研究焙烧温度对Fischer-Tropshc (F-T)合成铁基催化剂的结构性质、还原行为和碳化行为的影响. 结果表明, 较高的焙烧温度有利于碳酸盐的分解和结晶水的脱除, 促进了催化剂的还原. 随着焙烧温度的进一步升高, 催化剂的比表面积减小, 平均孔径增大, α-Fe2O3晶粒的粒径增大, 催化剂中金属与载体的相互作用增强, 从而削弱了CuO、K2O助剂的作用, 严重抑制了催化剂的还原和碳化.     

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.     

呋喃-乙酸分子间相互作用的量子化学研究

用密度泛函理论B3LYP方法选取6-311＋＋G(d,p)基组对呋喃-乙酸复合物进行了量子化学计算研究, 通过在相同水平下的频率振动分析发现了该势能面上6个极小值点, 其最稳定构型对应一强O…H—O型氢键, 其结合能在消除基组重叠误差后为－20.87 kJ•mol^－1. 通过自然键轨道(NBO)分析, 研究了电荷转移及轨道相互作用. 通过自洽反应场(SCRF)理论中的Onsager 溶剂模型在介电常数分别为1.0, 2.247, 4.9, 7.58, 10.36, 20.7, 32.63, 38.2, 46.7, 78.39的不同溶剂环境下重新优化呋喃与乙酸势能面上最稳定构型A, 研究了溶剂对呋喃-乙酸复合物几何构型、电荷分布、偶极矩以及结合能的影响. 发现溶剂化作用增大了呋喃与乙酸分子间的结合能, 导致O…H距离减小, H—O振动频率红移. 当溶液介电常数在1.0～32.63范围时, 溶剂效应十分显著, 当介电常数大于32.63后, 溶剂化作用几乎达到了极限.     

一种新型共生沸石(T-L)的合成与表征

在Na₂O-K₂O-Al₂O₃-SiO₂-H₂O体系中水热合成了一种新型的共生沸石, 它由L型沸石生长在T型沸石的一端而形成, 称之为T-L型沸石. 通过XRD, SEM, TEM, EDX, IR等手段对其进行了初步的表征. SEM相片表明这种沸石具有特殊的铆钉状外形; 在TEM相片上可以清楚地看到L型沸石的大孔道, 此孔道与L型沸石的表面垂直. 通过EDX的数据计算发现共生沸石的两相有不同的骨架硅铝比: T型沸石部分Si/Al＝3.71, L型沸石部分Si/Al＝3.41. 在该样品中B酸大于L酸.