On-off scheduling schemes for power-constrained electric vehicle charging

In this paper, we study the problem of establishing a dynamic charging schedule of electric vehicles (EVs) at a charging station, assuming that limited power implies that only a limited number of EVs can charge simultaneously. The only control we assume to be available to the charging station is the ability to (at any given time) turn on or off the power supply to any EV, with this tool we want to develop a charging schedule that will satisfy the energy demands of the EVs in their intended deadlines. We propose two distinct approaches to this problem: a discretized time version, based on a greedy-like algorithm, and a continuous time version, based on linear programming. We compare these two approaches and numerically study the improvement they yield in the efficiency of the charging procedure, when applied to simulated data based on real parking data. Finally, we illustrate the flexibility of the models by sketching several possible extensions.     

13C NMR quantification of mono and diacylglycerols obtained through the solvent‐free lipase‐catalyzed esterification of saturated fatty acids

In the present investigation, we studied the enzymatic synthesis of monoacylglycerols (MAG) and diacylglycerols (DAG) via the esterification of saturated fatty acids (stearic, palmitic and an industrial residue containing 87% palmitic acid) and glycerol in a solvent‐free system. Three immobilized lipases (Lipozyme RM IM, Lipozyme TL IM and Novozym 435) and different reaction conditions were evaluated. Under the optimal reaction conditions, esterifications catalyzed by Lipozyme RM IM resulted in a mixture of MAG and DAG at high conversion rates for all of the substrates. In addition, except for the reaction of industrial residue at atmospheric pressure, all of these products met the World Health Organization and European Union directives for acylglycerol mixtures for use in food applications. The products were quantified by ¹³C NMR, with the aid of an external reference signal which was generated from a sealed coaxial tube filled with acetonitrile‐d3. After calibrating the area of this signal using the classical external reference method, the same coaxial tube was used repeatedly to quantify the reaction products. Copyright © 2012 John Wiley & Sons, Ltd.     

A Simple Strategy to Improve the Accuracy of the Injection Step in Batch Injection Analysis Systems with Amperometric Detection

In this study, we describe for the first time the application of an internal standard method to compensate for random errors associated with the injection procedure in batch injection analysis (BIA) systems with multiple pulse amperometric detection. A sequence of potential pulses was selected in such a way that the internal standard (IS) compound was detected individually at one potential pulse and both the IS and analyte, were detected at another potential pulse. The current ratio (I_IS+analyte/I_IS) was used in the construction of the calibration curve and then to compensate for random errors. The use of disposable syringes or manual pipettes in BIA systems increases the robustness of the method and dispenses with skilled operators.     

Evaluation of a Brazilian ion chromatography interlaboratory study

This paper describes a Brazilian interlaboratory program study on anion measurement in synthetic water. The program described is promoted regularly since 2007 and recommended the use of ion chromatography as analytical technique for all participant laboratories. Two samples (X and Y) with different anion (fluoride, chloride, nitrite-N, nitrate-N, sulfate and phosphate-P) concentration levels were twice distributed in 2011. Each sample on each round had the homogeneity, and the stability tested for a period of 15 days. Upon ensuring the homogeneity and stability, the samples were distributed to 39 laboratories located around the country. The aim of this study was to verify the laboratories’ precision and to establish the measurement comparability among Brazilian laboratories that routinely use ion chromatography for water sample analysis. It was also possible to identify the most frequent sources of systematic and random errors for each measured anion, related to the ion chromatography technique. Some specific metrological issues related to the geographical region are discussed.     

Al2O3/K2O-containing non-stoichiometric lithium disilicate-based glasses

The crystallisation kinetics of experimental glasses in 3 different systems: (A) Li₂O–SiO₂, (B) Li₂O–Al₂O₃–SiO₂ and (C) Li₂O–K₂O–Al₂O₃–SiO₂ were studied under non-isothermal conditions. The DTA results revealed a stronger tendency to crystallisation of binary compositions in comparison to the ternary and quaternary compositions comprising Al₂O₃ and K₂O which present the lower crystallisation, i.e. the crystallisation propensity follows the trend A > B > C. The devitrification process in the Li₂O–SiO₂ and Li₂O–Al₂O₃–SiO₂ systems began earlier and the rate was higher in comparison to that of glasses in the quaternary Li₂O–K₂O–Al₂O₃–SiO₂ system. Thus, addition of Al₂O₃ and K₂O to glasses of Li₂O–SiO₂ system was demonstrated to promote glass stability against crystallisation. However, the activation energy for crystallisation was shown to depend also on the SiO₂/Li₂O ratio with the binary system showing a decreasing trend with increasing SiO₂/Li₂O ratio, while the opposite tendency was being observed for compositions with added Al₂O₃ and K₂O.     

A close analysis of metal-enhanced fluorescence of tryptophan induced by silver nanoparticles: wavelength emission dependence

In the last few years, silver nanoparticles have been proposed as a promising alternative for the label-free detection of proteins via metal-enhanced fluorescence. Generally, the aromatic amino acid tryptophan is most frequently used in this type of studies, because the intrinsic fluorescence of proteins is usually dominated by tryptophan emissions. In the present study, we evaluated the fluorescence behavior of tryptophan in the presence of a silver colloid with nanoparticles of 100 nm in diameter. The results showed that a nanoparticles concentration of 32 mg L^?1 induced maximum fluorescence enhancement. However, the metal-enhanced fluorescence was dependent on the emission wavelength of tryptophan, and this phenomenon was closely related to the metal surface reabsorption process (inner filter effect), suggesting that the plasmon resonance reabsorption effect should be taken into account in analyses involving protein studies by metal-enhanced fluorescence.     

Simple Reduction of Heteroaromatic Esters to Alcohols Using a Sodium Borohydride–Methanol System

Some heteroaromatic esters were reduced to the corresponding alcohols by using a sodium borohydride–methanol system. The reduction was completed within 0.15–2.0 h in refluxing THF. The alcohol products were isolated after aqueous workup in moderate to excellent yield (48–97%).     

Sonochemical Formation of Iodohydrin and Epoxide from Cyclohexene

Ultrasonic irradiation substantially improves the reaction of cyclohexene with I₂ in aqueous dioxane in the presence of Cu(OAc)₂ · H₂O to generate the expected iodohydrin in high yield. The product undergoes cyclization to the epoxide by biphasic treatment with either Na₂CO₃ or KOH in a sonication‐sensitive step.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.