Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Modeling of absorption kinetics of poly(acrylamide) hydrogels crosslinked by EGDMA and PEGDMAs

In this study, acrylamide-based hydrogels are synthesized by free radical solution polymerization in aqueous solution using ethylene glycol dimethacrylate (EGDMA) and its derivative polyethylene glycol dimethacrylate (PEGDMA) with different molecular weights as crosslinkers in the solution medium. The Fourier transform infrared spectroscopy technique is used for the structural characterization of the hydrogels. Dynamic swelling tests are conducted on acrylamide-based hydrogels for the determination of the swelling characteristics with respect to different crosslinking concentrations at room temperature. The parameters of swelling kinetics and diffusion mechanisms of the hydrogels are calculated with the aid of the data obtained. Accordingly, PEGDMA and EGDMA absorption capacity is found to increase with increasing concentrations. The lowest and highest water absorption capacities in PEGDMA₈₁₀ and EGDMA crosslinked hydrogels are 22.73–48.39 and 10.15–16.02 g/g, respectively. Water intake of hydrogels crosslinked by EGDMA and PEGDMAs followed Fickian nature type diffusion except for PEGDM₈₁₀, which has a swelling exponent greater than 0.5 and so does not follow a Fickian type of diffusion. PEGDM₈₁₀ showed the fastest diffusion rate of between 5.87 × 10^?4 and 10.87 × 10^?4 cm² s^?1.     

氨三乙酸、缬氨酸、亮氨酸的三元过渡金属配合物：合成和生物学应用

以氨三乙酸HNTA2-为主要配体,缬氨酸(valine)或亮氨酸(leucine)为次要配体在微酸性介质中合成了Ni(Ⅱ),Cu(Ⅱ),and Zn(Ⅱ)的三元配合物。用元素分析、热分析、FTIR,UV-Vis分光光度法,磁性测量和质谱法表征了合成的三元配合物。结果表明,三元配合物可在金属(M):氨三乙酸(HNTA)∶缬氨酸(valine)或亮氨酸(leucine)=1∶1∶1时制得,其分子结构为[M(HNTA)(valine)(H2O)2].1.5H2O and[M(HNTA)(leucine)(H2O)2].1.5H2O(其中M=Ni(Ⅱ)or Cu(Ⅱ))和H2[Zn(NTA)(valine)(H2O)]H2O。标题三元过渡金属配合物为八面体对称构型。同时研究了该三元配合物对大肠杆菌,金黄色葡萄球菌,白色念珠菌,黄曲霉菌(菌株从开罗大学理学院微分析中心获得)的抗菌活性。根据推荐的知名方法用标准的抗菌和抗真菌剂进行体外测试(in vitro)以评估我们的新制备的配合物对细菌和真菌物种的生长抑制活性。     

Base mediated synthesis of α-aminated aroyl/acetylnaphthalenes through [4+2] annulations

We have developed a base promoted simple, efficient and alternative approach for the synthesis of 4-amino-3-aroyl//heteroaroyl/acetyl-2-methylsulfanyl-naphthalene-1-carbonitriles by reaction of easily accessible 3,3-bis(methylthio)-1-aryl/heteroaryl/acetylprop-2-en-1-one and 2-cyanomethyl-benzonitrile. Reaction of 1-(2-halo/methoxy-phenyl)-3,3-bis(methylthio)prop-2-en-1-one and 2-cyanomethyl-benzonitrile under basic conditions also afforded 6-(methylthio)-7-oxo-7,12-dihydrobenzo[c]acridine-5-carbonitrile along with usual product. Structure of the synthesized product has been confirmed by single X-ray crystallography.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

Reactive sensing capability towards the working electrical and chemical conditions of poly (aniline –co–o-toluidine) copolymers

Conducting polymers are considered as reactive gels which can sense the working ambient through their unique electrochemical reaction. Copolymers of aniline with o-toluidine for three different monomer compositions were synthesized chemically and were characterized using FTIR and UV-Vis spectroscopy, SEM, TGA, and cyclic voltammetry. The electrochemical reactive sensing characteristics with respect to the electrical and chemical working conditions of the copolymers were verified and compared through Chronopotentiometric responses in aqueous solutions of HCl by changing the reaction variables: applied current and chemical environment (electrolyte concentration) at a fixed constant charge. The consumed electrical energy during the electrochemical reaction of the copolymers varies linearly with the driving current and follows a logarithmic dependence on the electrolyte concentration. The consumed electrical energy during the reaction was found to act as the sensing parameter. At the same experimental condition, the sensitivity was associated with the conductivity of the copolymers. The highly conducting composition gives the highest sensitivity. These experimental results were fitted with the theoretical equation.

     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

N-Doped Carbon Nanofibers Encapsulating CoO@Co9S8 Nanoparticles: Preparation from S-Rich Co32 Coordination Cluster Precursors by Electrospinning and Application for Superior Li-ion Storage

Thiacalixarene-supported Co₃₂nanoclusters encapsulated in polyacrylonitrile nanofibers(Co₃₂@PAN-NFs) by electrospinning have been utilized as precursors to fabricate N-doped CoO@Co₉S₈ carbon nanofibers(CoO@Co₉S₈@CNFs) for superior Li-ion storage. The S-rich Co₃₂ clusters capped by organic sheets afforded the well dispersed cobalt oxide/sulfide nanoparticles embedded in carbon nanofiber composites by direct calcination. The N-doped CoO@Co₉S₈@CNFs nanocomposites have been utilized as anode materials for lithium ion battery with the reversible capabilities being of 1051.8, 967.6, 894.7, 782.7, 669.5 and 525.4 mA·h/g at 0.1, 0.2, 0.5, 1, 2 and 3 A/g, respectively. The CoO@Co₉S₈@CNFs also showed a relatively high stable capacity of 551.7 mA·h/g at the current density of 1 A/g after 200 cycles of rate experiments. The as-obtained N-doped CoO@Co₉S₈@CNFs nanocomposites exhibited superior reversible capacity, rate performance, Coulomb efficiency(74.5% vs. 63.9%) and cyclic stability comparing with the CoO@Co₉S₈@C derived from simple annealing of Co₃₂ templates.     

An updated review of nanofluids in various heat transfer devices

Journal of Thermal Analysis and Calorimetry - The field of nanofluids has received interesting attention since the concept of dispersing nanoscaled particles into a fluid was first introduced in...     

Synthesis,Antibacterial, and Antioxidant Evaluation of Novel Series of Condensed Thiazoloquinazoline with Pyrido,Pyrano, and Benzol Moieties as Five- and Six-Membered Heterocycle Derivatives

A novel synthesis of thiazolo[2,3-b]quinazolines 4(a–e), pyrido[2′,3′:4,5]thiazolo[2,3-b]quinazolines {5(a–e), 6(a–e), and 7(a–e)}, pyrano[2′,3′:4,5]thiazolo[2,3-b]quinazolines 8(a–e), and benzo[4,5]thiazolo[2,3-b]quinazoloine9(a–e) derivatives starting from 2-(Bis-methylsulfanyl-methylene)-5,5-dimethyl-cyclohexane-1,3-dione 2 as efficient α,α dioxoketen dithioacetal is reported and the synthetic approaches of these types of compounds will provide an innovative molecular framework to the designing of new active heterocyclic compounds. In our study, we also present optimization of the synthetic method along with a biological evaluation of these newly synthesized compounds as antioxidants and antibacterial agents against the bacterial strains, like S. aureus, E. coli, and P. aeruginosa. Among all the evaluated compounds, it was found that some showed significant antioxidant activity at 10 μg/mL while the others exhibited better antibacterial activity at 100 μg/mL. The results of this study showed that compound 6(c) possessed remarkable antibacterial activity, whereas compound 9(c) exhibited the highest efficacy as an antioxidant. The structures of the new synthetic compounds were elucidated by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR.