Th,U and trace elements determination in Egyiptian Lake sediments by INAA and laser fluorimetry

A study was undertaken to determine element concentrations in Aswan High Dam Lake sediments. Sediment samples were collected from 40 to 500 km upstream of the dam to follow the sedimentation process and the distribution of Th, U and the trace elements in the lake. INAA was applied for the determination of Sm, Ce, Lu, Th, Cr, Yb, Au, Hf, Ba, Nd, Cs, Tb, Sc, Rb, Fe, Zn, Co, Eu, and Sb, while Laser Fluorimetry was applied for U determination. The accuracy and the reproducibility of the techniques were tested with IAEA standard materials (SL, Soil-7). The U values ranged from 4 ppm to 18 ppm, Th values were between 2 and 10 ppm, and showed a very good correlation with the rare earth elements and Fe. The distribution of most of the elements in the lake follows the same trend as the distribution of the clays in the sediments. Ba showed a negative correlation with most of the elements under investigation.Paper presented at the 3th International Conf. on Nuclear and Radiochemistry (NRC-3), Vienna, 1992.     

Analysis of tungsten-containing mixtures and some alloy steels by potentiometric titration methods

Reliable potentiometric titration methods are adopted for the analysis of tungsten mixtures analogous to some industrially important alloys such as low alloy tap steel, tungsten chisel, and high speed steels. Tungsten is separated as Hg₂WO₄ and unreacted Hg(I) is titrated with KBr. The techniques of oxidation with I₂ or reduction with KI and use of the selective arsenite reduction of Cr(VI) and/or Mn(IV) in the presence of V(V) or Fe(III) make it possible to determine alloy components without tedious separations. In all titrations the potential break is sharp enough for the precise establishment of the end point.     

过碳酸钠-醋酸酐作用下的Baeyer-Villiger反应

在醋酸酐介质中, 过碳酸钠可以与酮进行Baeyer-Villiger反应, 将它们氧化成相应的酯。其中脂环酮的反应结果较好, 环内酯的产率约为80%。芳香酮除芳环被活化的以外, 效果欠佳。当反应施加超声辐射后可显著加快反应速度, 并对过碳酸钠的作用机理进行了讨论。     

A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

环戊二烯基氟尿嘧啶基钛（Ⅳ）、锆（Ⅳ）配合物的合成及其抗肿瘤活性的研究

用（ＲＣｐ）２ＭＣｌ２和（ＲＣｐ）ＴｉＣｌ３（Ｒ＝Ｈ，Ｍｅ；Ｍ＝Ｔｉ，Ｚｒ）分别与具有生物活性的２－甲氧基－５－氟尿嘧啶、２－甲硫基－５－氟尿嘧啶在甲苯溶剂中１１０℃下反应，合成了２０个未见报道的（ＲＣｐ）·Ｍ（Ｏｐｍ）２Ｃｌ、（ＲＣｐ）２Ｍ（ＯＰｍ）Ｃｌ和（ＲＣｐ）Ｍ（ＯＰｍ）Ｃｌ２（ＯＰｍ＝２－甲氧基－５－氟尿嘧啶基，２－甲硫基－５－氟尿嘧啶基）型钛锆配合物，这些配合物均经元素分析、１ＨＮＭＲ、ＩＲ光谱鉴定．初步动物试验表明，配合物１、４、１１、１４对小白鼠移植性艾氏腹水场的抑制作用居首，而配合物２、３、５、６、１２、１３、１５、１６次之，其它锆配合物几乎没有抑制作用。     

微波辅助-光催化降解氯酚的QSPR研究

本文运用PM3算法计算得到氯酚(CPs)的分子结构参数,并结合光解速率进行PLS分析,建立了速率与量子化参数之间的关系模型,模型的Q2cum分别为0.8776和0.9545(>0.5),具有良好的预测能力。研究结果表明,参数Ehomo、Elumo Ehomo、Elumo、N、Mw、Elumo-Ehomo、(Elumo-Ehomo)2是决定CPs光解速率的主要因素;CPs的光解速率随Ehomo、Elumo Ehomo、Elumo、Elumo-Ehomo、(Elumo-Ehomo)2的增大而增大,随N、Mw的增大而减小。     

The effect of intramolecular‐hydrogen bonds in the synthesis of novel imidates from a 13‐membered dioxadithia crown ether diester

The synthesis and structural properties of three novel imidates, 11,13‐bis‐(2‐amino‐ethylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane ( 2 ), 11,13‐bis‐(3‐aminopropylimino)‐1,10‐dioxa‐4,7‐dithiacyclotridecane, ( 3 ) and 2,11‐dioxa‐5,8‐dithia‐13,16,19,22‐tetraazabicyclo[10.10.1]tricosa‐1(22),12‐diene, ( 4 ) have been described. These compounds were synthesized by treating 1,10‐dioxa‐4,7‐dithiacyclotridecane‐11,13‐diester ( 1 ) with the appropriate diamine under N₂ and their structures have been characterised by elemental analyses, ¹H‐ and ¹³C‐nmr, ir, and mass spectral studies. Elemental analyses and spectroscopic data support the proposed imidate structures. In addition, total energy and heat of formation (Figure 2) calculated for imidates 2a‐4a and 2b‐4b by the semiempirical AM1 calculations have shown that imidates 2b‐4b having intramolecular hydrogen bonds are more stable (5‐10 kcal/mol) than compounds 2a‐4a .     

Über Halogenphenylester der Phosphorsäure

A simple method for preparing halogenphenylesters of phosphoric, phenylphosphonic and phosphorous acid from the respective acid chlorides and phenols in the presence of various nitrogen-containing catalysts is described. Contrary to other methods, these reactions give high yields, despite of steric hindrance.