The Rate Constant for Dissociative Electron Attachment to Ozone Revisited

The rate constant for dissociative electron attachment to ozone has been derived over the energy range from about 0 to 10 eV using recently measured and also corrected cross section data. The new rate constant data sets for two partial dissociative channels, as well as for the total dissociative electron attachment, are compared with previously reported values, and existing discrepancies are discussed.     

Accuracy and variability of acoustic measures of voicing onset

Five commonly used methods for determining the onset of voicing of syllable-initial stop consonants were compared. The speech and glottal activity of 16 native speakers of Cantonese with normal voice quality were investigated during the production of consonant vowel (CV) syllables in Cantonese. Syllables consisted of the initial consonants /ph/, /th/, /kh/, /p/, /t/, and /k/ followed by the vowel /a/. All syllables had a high level tone, and were all real words in Cantonese. Measurements of voicing onset were made based on the onset of periodicity in the acoustic waveform, and on spectrographic measures of the onset of a voicing bar (f0), the onset of the first formant (F1), second formant (F2), and third formant (F3). These measurements were then compared against the onset of glottal opening as determined by electroglottography. Both accuracy and variability of each measure were calculated. Results suggest that the presence of aspiration in a syllable decreased the accuracy and increased the variability of spectrogram-based measurements, but did not strongly affect measurements made from the acoustic waveform. Overall, the acoustic waveform provided the most accurate estimate of voicing onset; measurements made from the amplitude waveform were also the least variable of the five measures. These results can be explained as a consequence of differences in spectral tilt of the voicing source in breathy versus modal phonation.     

Ionic liquid enhanced magnesium-based polymer electrolytes for electrical double-layer capacitors

This paper describes the preparation and characterization of poly(vinyl alcohol) (PVA)-added ionic liquid-based ion conductors. The polymer electrolyte is incorporated with magnesium triflate [Mg(CF₃SO₃)₂ or MgTf] as salt and 1-butyl-3-methylimidazolium bromide (BmImBr) as ionic liquid. Differential scanning calorimetry (DSC) is carried out to investigate the glass transition temperature which is used to study the plasticizing effect of the ionic liquid. The highest conducting ionic liquid-based polymer electrolyte is used to fabricate electrical double-layer capacitors (EDLC). The electrochemical potential window is evaluated using linear sweep voltammetry (LSV). The electrochemical capacitance of the EDLC is evaluated through cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD). The electrochemical potential window of ionic liquid-added polymer electrolyte is extended from 1.35 to 2.6 V. Cyclic voltammetry (CV) proves the improvement in specific capacitance of the electrical double-layer capacitors (EDLCs) containing ionic liquid-added polymer electrolyte.     

Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

Oxidation of Oxazolines and Thiazolines to Oxazoles and Thiazoles. Application of the Kharasch-Sosnovsky Reaction

Using a modification of the Kharasch-Sosnovsky reaction, the oxidation of oxazolines and thiazolines bearing a variety of 2-alkyl substituents (chiral and achiral) were smoothly oxidized to their corresponding oxazoles and thiazoles, respectively. The key feature involved in the successful implementation of this important oxidation was the use of a mixture of Cu(I) and Cu(II) salts to enhance the oxidation of the intermediate captodative radical, 24. The main limitation of this method was shown when the oxidation failed with oxazolines/thiazolines lacking the carboalkoxy group at C-4.     

Diglycidyl ether of bisphenol-A epoxy resin–polyether sulfone/polyether sulfone ether ketone blends: phase morphology, fracture toughness and thermo-mechanical properties

The properties of diglycidyl ether of bisphenol-A epoxy resin toughened with poly(ether sulfone ether ketone) (PESEK) and poly(ether sulfone) (PES) polymers were investigated. PESEK was synthesised by the nucleophilic substitution reaction of 4,4’-difluorobenzophenone with dihydroxydiphenylsulfone using sulfolane as solvent and potassium carbonate as catalyst at 230 °C. The T _g–composition behaviour of the homogeneous epoxy resin/PESEK blend was modelled using Fox, Gordon–Taylor and Kelley–Bueche equations. A single relaxation near the glass transition of epoxy resin was observed in all the blend systems. From dynamic mechanical analysis, the crosslink density of the blends was found to decrease with increase in the thermoplastic concentration. The storage modulus of the epoxy/PESEK blends was lower than that of neat resin, whilst it is higher for epoxy/PES blends up to glass transition temperature, thereafter it decreases. Scanning electron microscopic studies of the blends revealed a homogeneous morphology. The homogeneity of the blends was attributed to the similarity in chemical structure of the modifier and the cured epoxy network and due to the H-bonding interactions between the blend components. The fracture toughness of epoxy resin increased on blending with PESEK and PES. The increase in fracture toughness was due to the increase in ductility of the matrix. The thermal stability of the blends was comparable to that of neat epoxy resin.     

Decomposition of dinuclear manganese complexes for the preparation of nanostructured oxide materials

The crystal structures of several dinuclear complexes of manganese are reported, and the decomposition and analysis of the nanostructured products derived from them are presented. 1,4,7,10-Tetraazacyclododecane (cyclen) forms dinuclear complexes 1-4 containing doubly oxo-bridged or oxo-acetato bridging ligands depending on the manganese salt used for the reaction. Doubly oxo-bridged 1 crystallizes in the orthorhombic space group Pnma, a = 22.3850(14) A, b = 9.1934(5) A, c = 13.2424(10) A, V = 2725.2(3) A(3). 2, containing [Mn(SCN)5](3-) conteranions, crystallizes in monoclinic space group I2/a with a = 18.2699(10) A, b = 11.2384(6) A, c = 18.6432(9) A, alpha = 90.00 degrees, beta = 114.510(6) degrees, gamma = 90.00 degrees, V = 3483.0(3) A(3). Oxo-acetato-bridged 3 crystallizes in orthorhombic space group Pca21, a = 13.9322(11) A, b = 16.2332(13) A, c = 14.6794(8) A, V = 3320.0(4) A(3). Compound 4 consists of a templated quasi-one-dimensional manganese oxalate crystallized in the triclinic space group P1, a = 9.5442(11) A, b = 10.3758(10) A, c = 21.851(2) A, alpha = 83.720(12) degrees, beta = 80.106(13) degrees, gamma = 85.457(13) degrees, V = 2114.9(4) A(3). Compounds 1, 3, and 4 decompose to nanostructured oxide materials, which may be isolated in bulk as lamellar-structured particles or microspheres or deposited on substrates.     

Gadolinium chelate coated gold nanoparticles as contrast agents for both X-ray computed tomography and magnetic resonance imaging

Functionalized gold nanoparticles were applied as contrast agents for both in vivo X-ray and magnetic resonance imaging. These particles were obtained by encapsulating gold cores within a multilayered organic shell which is composed of gadolinium chelates bound to each other through disulfide bonds. The contrast enhancement in MRI stems from the presence of gadolinium ions which are entrapped in the organic shell, whereas the gold core provides a strong X-ray absorption. This study revealed that these particles suited for dual modality imaging freely circulate in the blood vessels without undesirable accumulation in the lungs, spleen, and liver.     

Polyphenols from Dichrostachys cinerea Fruits Anti-Inflammatory,Analgesic, and Antioxidant Capacity in Freund’s Adjuvant-Induced Arthritic Rat Model

Dichrostachys cinerea (L.) Wigth & Arn. (DC) is widely used in traditional medicine against several inflammatory diseases, especially rheumatoid arthritis, because of its antioxidant and anti-inflammatory effects. This study aimed to characterize the polyphenol-rich DC fruit extracts and investigate the analgesic, anti-inflammatory, and antioxidant effects in a rat inflammation model induced by complete Freund’s adjuvant (CFA). Water and ethanolic extracts were characterized using liquid chromatography coupled with mass spectrometry (LC-MS), Fourier-transform infrared (FTIR) spectroscopy, and gas chromatography coupled with mass spectrometry (GC-MS). The polyphenol-rich extracts were administered in three different concentrations for 30 days. Pain threshold, thermal hyperalgesia, edema, and serum biomarkers specific to inflammatory processes or oxidative stress were evaluated. Both extracts were rich in polyphenolic compounds, mainly flavan-3-ols, proanthocyanidins, and flavone glycosides, which had important in vitro antioxidant capacity. DC fruit extracts administration had the maximum antinociceptive and anti-inflammatory effects after one day since the CFA injection and showed promising results for long-term use as well. The measurement of pro-inflammatory cytokines, cortisol, and oxidative stress parameters showed that DC extracts significantly reduced these parameters, being dose and extract-type dependent. These results showed potential anti-inflammatory, analgesic, and antioxidative properties and revealed the necessity of using a standardized polyphenolic DC extract to avoid result variability.     

Reactivity of polyesters in glycolysis reactions: Unexpected effect of the chemical structure of the polyester glycolic unit

Kinetic studies of PET glycolysis by diethylene glycol (DEG), dipropylene glycol (DPG), glycerol (Gly) and mixtures of these glycols have shown, in a previous study, that the order of reactivity of the glycols differs according to the conditions of temperature and catalysis. Indeed, their global reactivity depends both on their chemical reactivity and physico-chemical properties.Glycolysis of model polyesters which are liquid at the reaction temperature, which allows us to overcome the problem of the polyesters' solubility, were studied to compare the chemical reactivity of these glycols. Three oligoesters were synthesized from dimethyl terephthalate and three different glycols namely triethylene glycol, ethylene glycol and hexanediol to form, respectively, PE₃T, OET and PTHD.Results showed that the order of reactivity of the glycols is the same for PET, OET and PTHD but different for PE₃T. Indeed, DPG without catalyst has a particular and unexpected behaviour: its reactivity seems to be strongly influenced by the presence of oxygen atoms in the chain.