Application of thermal analysis for evaluating the digestion of microwave pre-treated sewage sludge

The effect of microwave pre-treatment (MwP) on anaerobic digestion of sewage sludge was studied by means of thermal analysis and evolved gas analysis. The effect of the pre-treatment at low energy input (<1000 kJ L^?1) on sludge solubilisation was studied with the aid of response surface methodology. The pre-treatment process was subsequently studied at energies of 488–2700 kJ L^?1 to evaluate the improvement in biogas production under mesophilic conditions. Organic matter modifications were studied using a Setaram TGA92 analyser at atmospheric pressure coupled to an MSC200 quadrupole mass spectrometer from Balzers. Particle size analysis was carried out using a Laser Diffraction Particle Size Analyser LS 13 320 Beckmann Coulter for evaluating the effect of MwP on sludge particles. Results showed an increase in organic matter solubilisation with the increase in the energy applied. Modifications in the specific surface area of the organic matter due to the MwP resulted in increments in methane yields. However, an accumulation of complex compounds was observed in thermal profiles at the maximum energy input (2700 kJ L^?1). Semi-continuous digestion experiments were evaluated using as substrate pre-treated sludge at the optimum energy value (975 kJ L^?1). Results showed a significant increase in methane yield (43 %) when evaluating the process at hydraulic retention times (HRTs) of 25–10 days.     

CZE separation of amitrol and triazine herbicides in environmental water samples with acid-assisted on-column preconcentration

A simple analytical scheme for the detection and quantification of amitrol and triazine herbicides (atrazine, ametryn and atraton) and degradation product (2‐hydroxyatrazine) in environmental water samples by CZE is reported. On‐column preconcentration of analytes from untreated water samples (mineral, spring, tap and river water) is accomplished by introducing an acid plug (200 mM citrate of pH 2.0) after the sample and then proceeding with the CZE separation, using 100 mM formiate buffer of pH 3.5 as running buffer and 25.0 KV as separation voltage. UV detection at 200 nm provides LODs from 50 to 300 nM in untreated samples and they were lowered tenfold by sample preconcentration by evaporation. Calculated recoveries were typically higher than 90%. Minimal detectable concentration of the electroactive amitrol could be decreased about 20‐fold when electrochemical detection was employed by monitoring the amperometric signal at +800 mV using a carbon paste electrode (LOD of 9.6 nM, 0.81 μg/L, versus 170 nM, 14.3 μg/L, using amperometric and UV detection, respectively) in untreated water samples.     

γ- and δ-lactams through palladium-catalyzed intramolecular allylic alkylation: enantioselective synthesis, NMR Investigation, and DFT rationalization

The Pd-catalyzed intramolecular allylic alkylation of unsaturated amides to give γ- and δ-lactams has been studied in the presence of chiral ligands. Ligand (R)-3,5-tBu-MeOBIPHEP (MeOBIPHEP = 6,6'-dimethoxybiphenyl-2,2-diyl)bis(diphenylphosphine)) afforded the best results and allowed the cyclization reactions to take place in up to 94:6 enantiomeric ratio. A model Pd-allyl complex has been prepared and studied through NMR spectroscopic analysis, which provided insight into the processes responsible for the observed enantiomeric ratios. DFT studies were used to characterize the diastereomeric reaction pathways. The calculated energy differences were in good agreement with the experimentally observed enantiomeric ratios.     

Fast characterization of functionalized silica materials by silicon-29 surface-enhanced NMR spectroscopy using dynamic nuclear polarization

We demonstrate fast characterization of the distribution of surface bonding modes and interactions in a series of functionalized materials via surface-enhanced nuclear magnetic resonance spectroscopy using dynamic nuclear polarization (DNP). Surface-enhanced silicon-29 DNP NMR spectra were obtained by using incipient wetness impregnation of the sample with a solution containing a polarizing radical (TOTAPOL). We identify and compare the bonding topology of functional groups in materials obtained via a sol-gel process and in materials prepared by post-grafting reactions. Furthermore, the remarkable gain in time provided by surface-enhanced silicon-29 DNP NMR spectroscopy (typically on the order of a factor 400) allows the facile acquisition of two-dimensional correlation spectra.     

Impact of distinct chemical structures for the development of a methamphetamine vaccine

(+)-Methamphetamine (METH) use and addiction has grown at alarming rates over the past two decades, while no approved pharmacotherapy exists for its treatment. Immunopharmacotherapy has the potential to offer relief through producing highly specific antibodies that prevent drug penetration across the blood-brain barrier thus decreasing reinforcement of the behavior. Current immunotherapy efforts against methamphetamine have focused on a single hapten structure, namely linker attachment at the aromatic ring of the METH molecule. Hapten design is largely responsible for immune recognition, as it affects presentation of the target antigen and thus the quality of the response. In the current paper we report the systematic generation of a series of haptens designed to target the most stable conformations of methamphetamine as determined by molecular modeling. On the basis of our previous studies with nicotine, we show that introduction of strategic molecular constraint is able to maximize immune recognition of the target structure as evidenced by higher antibody affinity. Vaccination of GIX(+) mice with six unique METH immunoconjugates resulted in high antibody titers for three particularly promising formulations (45-108 μg/mL, after the second immunization) and high affinity (82, 130, and 169 nM for MH2, MH6, and MH7 hapten-based vaccines, respectively). These findings represent a unique approach to the design of new vaccines against methamphetamine abuse.     

A simplified Quick, Easy, Cheap, Effective, Rugged and Safe approach for the determination of trihalomethanes and benzene, toluene, ethylbenzene and xylenes in soil matrices by fast gas chromatography with mass spectrometry detection

A method based on simplified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) extraction followed by large-injection volume-fast gas chromatography and mass spectrometry detection has been developed for the determination of trihalomethanes (chloroform, bromodichloromethane, dibromochloromethane and bromoform) and BTEX (benzene, toluene, ethylbenzene and xylenes) in soil samples.The simplified version of QuEChERS used meets the requirements of the “green chemistry” and provides reliable results with high sample throughput, low solvent consumption, little labour and the use of materials commonly employed in laboratories. The GC device used is equipped with a programmable temperature vaporizer (PTV), with a liner packed with Tenax-TA^®. Using the solvent-vent mode, the PTV allows the injection of large volumes of sample, affording an improvement in the sensitivity of the method. The chromatographic conditions used here allowed the separation of the compounds in less than 5.50 min. Good linearity was obtained for all the target compounds, with highly satisfactory repeatability and reproducibility values. The limits of detection were in the 0.2 to 15 μg kg⁻¹ range. The method was validated by the analysis of two certified reference materials.     

Characterization of galactooligosaccharides derived from lactulose

Galactooligosaccharides are non-digestible carbohydrates with potential ability to modulate selectively the intestinal microbiota. In this work, a detailed characterization of oligosaccharides obtained by transgalactosylation reactions of the prebiotic lactulose, by using β-galactosidases of different fungal origin (Aspergillus oryzae, Aspergillus aculeatus and Kluveromyces lactis), is reported. Oligosaccharides of degree of polymerization (DP) up to 6 were detected and quantified by HPLC-ESI MS from a complex mixture produced by transgalactosylation reaction with A. oryzae (GOSLuAo), whereas only carbohydrates up to DP4 and DP5 were found for those obtained from the reaction with β-galactosidases from K. lactis (GOSLuKl) and A. aculeatus (GOSLuAa), respectively. Disaccharides (galactosyl-galactoses and galactosyl-fructoses) and trisaccharides were characterised in the three mixtures by GC-MS as their trimethylsilyl oximes. Galactosyl- and digalactosyl-glycerols were produced during the transgalactosylation reaction of lactulose with β-galactosidases from A. aculeatus and K. lactis, due to the presence of glycerol as enzyme stabiliser.     

Difluoro-boron-triaza-anthracene: a laser dye in the blue region. Theoretical simulation of alternative difluoro-boron-diaza-aromatic systems

The synthesis, photophysical and laser properties of a difluoro-boron-triaza-anthracene (BTAA) compound are analyzed in the present paper. The molecular structure of this dye is an anthracene-like core with N atoms at 4a, 9 and 10a positions where two of them (4a and 10a) are linked through a BF(2)-bridge group. This structure is reminiscent of aza-BODIPY dye with an s-indacene core, BODIPY being one of the most commonly used laser dye family in the Vis region. The main absorption and emission bands of the new dye are localized in the blue part of the Vis region of the electromagnetic radiation, a spectral region practically unexploited by the BODIPY chromophore. Moreover, the new dye presents a higher laser efficiency and photostability than other commercial laser dyes operating in the same spectral region. In order to look for new molecular structures with potential laser emission covering the whole Vis spectral region, the spectroscopic properties of other different chromophoric systems based on BF(2)-linking aromatic groups are theoretically simulated by quantum mechanical calculations.