Spray thermometry using thermographic phosphors

In this study a novel technique for 2D spray temperature measurement is presented. For this purpose the thermographic phosphor (TP) Mg₄GeO_5.5F:Mn was dispersed in n-dodecane and atomised using a conventional semi solid-cone nozzle. The thermographic phosphor was excited electronically by a frequency tripled Nd:YAG laser (355 nm). An ICCD-camera in combination with an image doubler detected the subsequently emitted phosphorescence at both peak emission wavelengths located at 633 nm and 659 nm, respectively. Utilising suitable calibration measurements, the local spray temperature was determined by evaluating the intensity ratio of both emission wavelengths. To the knowledge of the authors this is the first approach of spray temperature measurement exploiting the temperature dependent intensity ratio of thermographic phosphors. PACS 07.20.Dt; 32.50.+d     

Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

UV laser induced desorption of CsI and RbI ion clusters

Experimental results of laser sputtering of cesium and rubidium iodide secondary ions are presented. A TOF mass spectrometer, operating in linear mode, continuous extraction for positive or negative ions, was used for the analysis of (CsI)_nCs⁺, (CsI)_nI⁻, (RbI)_nRb⁺ and (RbI)_nI⁻ ion emission as a function of the laser irradiance. Experimental data show that the cluster ion emission yields decrease exponentially with n, for all the laser irradiances applied. Theoretical analysis of the clusters structure was performed using density functional theory at the B3LYP/LACV3P level, for the positive and negative cluster series. A quasi-equilibrium evolution of the clusters is proposed to extract a parameter characteristic of the cluster recombination process: the effective temperature. The hypothesis of the atomic species’ recombination (during the expansion of a high density highly ionized cloud) leading to cluster formation is confirmed to some extent in a second set of experiments: the UV laser ablation of a mixed and non-mixed cesium iodide and potassium bromide targets. These experiments show that the emission yields contain contributions from both the recombination process and from the sample stoichiometry, even for high laser irradiances.     

Structural phase transformations and physical properties of intercalation compounds in the Cr0.5Ti(Se1−x Tex)2 system

The atomic structure and magnetic and electric properties of the Cr_0.5TiSe₂-Cr_0.5TiTe₂ system of intercalated phases were studied in detail by gradually replacing selenium by tellurium. It was revealed that this replacement changes the crystalline structure from monoclinic in the initial compounds to hexagonal in the compounds containing various types of chalcogen atoms; this is accompanied by disordering of chromium atoms in the van der Waals gaps. The electrical resistance and magnetic characteristics vary nonmonotonically on replacement of selenium by tellurium, which is associated with a change in the degree of atomic disordering during the transition from Cr_0.5TiSe₂ to Cr_0.5TiTe₂.     

Kinetics of polarization reversal in irradiated thin PZT films

The effect of irradiation with electrons and neutrons and of exposure to synchrotron radiation on cyclic switching of polarization in thin films of lead zirconate titanate Pb(Zr,Ti)O₃ (PZT) was studied. It is shown that variations in the shape of switching currents are due to the generation of a spatially nonuniform bound internal field with account for an increase in the rate of bulk screening caused by irradiation. A correlation between structural variations and the evolution of the switching current measured during and after irradiation is established.     

Phasing of three vircators simulated in terms of coupled van der Pol oscillators

Phase synchronization in a system of three virtual-cathode microwave oscillators (vircators) simulated by coupled van der Pol oscillators is studied. The phasing dynamics of the vircators is visualized with the phase portraits of the system in the triangular coordinates. Different phasing conditions are found.     

An improved, free surface, topographic technique

Current techniques of water wave visualization such as shadowgraphy and stereo photography are widely used but are deficient in many aspects. Refraction based visualization observes the bending of light as it traverses across a liquid-air interface. This work describes the continued development of techniques to measure the surface height of a liquid free surface. The method, Reference Image Topography, utilizes refraction of light at the free surface as a function of the local angle of that surface. Particle Image Velocimetry (PIV) software is used to evaluate apparent dislocations of the target image viewed through the free surface, which are approximately proportional to the surface angle. High-resolution images are presented of the dynamic surface topography for a point source and the shallow water flow around a vertical cylinder.     

Composition and structure of low-molecular-weight products of thermal oxidative degradation of atactic polypropylene

The composition and structure of low-molecular-weight products of thermal oxidative degradation of atactic polypropylene were studied.     

Fundamental aspects of initiated oxidation of tridecane and polyethylene in solutions

Specific features of the initiated oxidation of polyethylene and its low-molecular-weight analogue tridecane, associated with the occurrence of the process in the short-chain mode, were studied.