Mathematical Modeling of Multilayer Filters for Telecommunication

The article presents an interactive approach to the design of Wavelength Division Multiplexing (WDM) filters that combines classical design methods for multi-resonator systems with a semi-heuristic integer optimization method. This approach proves to be exceptionally efficient from the computational point of view and generates a whole range of different filter designs with virtually equivalent spectral properties. The article also considers a method for analyzing the sensitivity of WDM filters to manufacturing errors. The sensitivity analysis relies on computer simulation of thin-layer coating with optical monitoring of layer thickness by the turning point method. This analysis enables the designer to assess alternative filter designs with the purpose of improving manufacturing efficiency.     

On additives, morphological evolution and dielectric breakdown in low density polyethylene

A series of low density polyethylene systems has been studied with respect to structural evolution and short-term dielectric breakdown behaviour. All materials were based upon a single polymer, that is commonly used in high voltage applications, but with different additives. In all three of these systems, multiple melting transitions were observed, as a result of molecular fractionation effects during crystallization. In the virgin polymer, a space-filling banded spherulitic morphology was found to develop at low temperatures (102 °C and below) whereas, at higher temperatures, only a few isolated axialites were observed. Inclusion of the antioxidant resulted in greatly increased nucleation densities, such that, at low temperatures, no evidence of spherulitic organisation remained. At higher temperatures, sheaf-like lamellar aggregates developed, which were much smaller and much more numerous than in the case of the virgin polymer. Further addition of dicumyl peroxide (DCP) resulted in the rapid formation of a crosslinked network at 200 °C. Some crosslinking also occurred at 150 °C, but over a much longer timescale. Where extensive crosslinking occurred prior to crystallization, the resulting gel inhibited structural development, such that only a few small, isolated sheaves were able to form at 102 °C. In view of the principal application area of this material, the breakdown strength of each of the above systems was then measured and the whole data set was analysed statistically. When structural factors were considered alongside the statistics, no clear trends emerged to indicate that either the compositional or morphological variations were reflected in the short-term electrical failure processes.     

一种不等带宽光学梳状滤波器

提出了一种新型—Michelson—三面镜FabryPerot型50GHz不等带宽光学梳状滤波器设计方案,分析和模拟表明:该器件将一路信道间隔为50GHz的输入信号分离成信道间隔为100GHz的奇偶两路输出信号,其中在3dB处,奇数信道带宽大于30GHz用于10Gb/s传输,偶数信道带宽大于60GHz用于40Gb/s传输对于将来的40Gb/s系统,该器件具有优势.     

Analysis of tunable diode-laser spectra of Q(J,0) lines in CH3F near 1475 cm using a multispectrum fitting technique

We have analyzed the methyl fluoride ^RQ(J,0)Q branch lines located near 1475 cm⁻¹ using a simultaneous multi-spectrum fitting technique. In this analysis we have used previously recorded diode-laser data in which we collected many data points covering only one or two Q branch lines in a particular run. The analysis consists of simultaneously fitting 57 spectra collected with numerous pressure and path length conditions for all absorption lines. The data are concatenated to create one continuous spectrum of the Q branch. We have determined the intensity and self-broadened widths at 296 K for 23 ^RQ(J,0) lines.     

Dynamic holograms and optical limiting: Asymmetric two-wave interactions

The conditions for obtaining a high efficiency of energy exchange upon two-wave interactions in dynamic holograms are found by analysis and numerical simulation of a system of nonlinear equations. Use of an asymmetric scheme of beam interaction in a medium with two nonlinearities, one of which determines the amplitude and relaxation time of a grating and the other of which provides phase modulation of the interacting beams, is proposed. It is shown that such a scheme in combination with the specific properties of a medium makes it possible to radically reduce the requirements for the nonlinearity of a medium and the intensity of a light flux in limiting systems, as well as to significantly decrease the time of the transition process. As a result, it becomes possible to attain an efficiency of energy transfer higher than 90% and to increase the corresponding attenuation of a high-power beam by almost two orders of magnitude, which is of interest for optical limiting of intense light fluxes.     

Quantum effects in a one-dimensional magnetic gravitational trap for ultracold neutrons

JETP Letters - The problem of storing ultracold neutrons over a plane magnetic mirror in the presence of gravity is considered. For neutrons with a definite polarization, the sum of the magnetic...     

Destruction of a solid film under the action of ultrashort laser pulse

Molecular-dynamics (MD) simulation of the destruction of a crystal film heated by a femtosecond laser pulse was carried out. Heating is assumed to be instantaneous, because there is no time for the material to be displaced during the pulse. Film destruction is caused by the interaction of unloading waves. It can be considered as a model of a more complex process of splitting out of a thin surface layer from a massive target in the case where the layer remains solid after heating. It was found that the crystal order is broken due to the stretching strains and to the strong anisotropy of residual stress, resulting in a bipartition of the layer separating from the target. The lattice stretching and the formation of anisotropic stresses are due to the expansion of a heated lattice.     

双折射滤光片的色散特性研究

研究了由理想线偏振片和单轴双折射晶体波片组成的双折射滤光片倾斜放置时的二阶色散和 三阶色散特性，包括波片厚度、光线入射角和光轴旋转角的变化对二阶和三阶色散的影响. 还给出了双折射滤光片的群延迟表达式，并就色散特性与GT干涉仪进行了详细比较. 关键词： 双折射滤光片 群延迟 二阶色散 三阶色散