M?ssbauer analysis of high-energy mechanical-milled sand fraction of a magnetic soil developing on basalt

A sample of the coarse sand fraction from the soil material of the A-horizon (0?C0.2 m from the soil surface) of a dusky red magnetic Oxisol was submitted to high-energy mechanical milling for different times. This assay aimed mainly at (a) monitoring the individualization of strongly aggregated mineral particles, and (b) measuring the effect of the milling pressure on the mineralogy changes of the material. These data are also intended to experimentally subside any physical model describing the mechanical behavior of the superficial soil layer that is subjected to intensive machine management, in agriculture fields. Powder X-ray data reveal that some mineralogical phases, notably gibbsite, disappear soon after the first few hours milling. The 298 K-transmission Mössbauer spectrum for the non-milled sand sample shows a qualitatively typical pattern for the sand fraction of basalt derived soils, with magnetically ordered sextets, assignable mainly to hematite and maghemite, and an intense central (super)paramagnetic Fe^3?+? doublet. For the milled samples, spectra revealed progressive spectral reduction of the magnetic hyperfine structure, with concomitant increase of relative subspectral areas due to (super)paramagnetic phases, as the milling time increased. This result is consistent with the reduction of measured saturation magnetization, from 4.96(8) J T^???1 kg^???1, for the non-milled sample, to 3.26(7) J T^???1 kg^???1, for the sample milled for 8 hours.     

Electronic structure and reactivity of 3-acetyl-2-methylbenzo[b]thiophene: a quantum chemical study

The electronic structures of 3-acetyl-2-methylbenzothiophene, the cations resulting from its C-protonation at positions 4?C7 and O-protonation, and the dications formed upon protonation at positions 4?C7 of the O-protonation product were studied by the MNDO, HF/3-21G, and B3LYP/3-21G methods. Analysis of the relative energies of these cations and dications is in line with the earlier authors?? data on the predominant reactivity of positions 4 and 6 of the 3-acetyl-2-methylbenzothiophene molecule toward acylation.     

A certified reference material for radionuclides in the water sample from Irish Sea (IAEA-443)

A new certified reference material (CRM) for radionuclides in sea water from the Irish sea (IAEA-443) is described and the results of the certification process are presented. Ten radionuclides (³H, ⁴⁰K, ⁹⁰Sr, ¹³⁷Cs, ²³⁴U, ²³⁵U, ²³⁸U, ²³⁸Pu, ^239+240Pu and ²⁴¹Am) have been certified, and information values on massic activities with 95% confidence intervals are given for four radionuclides (²³⁰Th, ²³²Th, ²³⁹Pu and ²⁴⁰Pu). Results for less frequently reported radionuclides (⁹⁹Tc, ²²⁸Th, ²³⁷Np and ²⁴¹Pu) are also reported. The CRM can be used for quality assurance/quality control of the analysis of radionuclides in water samples, for the development and validation of analytical methods and for training purposes. The material is available in 5 L units from IAEA (http://nucleus.iaea.org/rpst/index.htm).     

Accumulation of uranium, transuranium and fission products on stainless steel surfaces II. Sorption studies in a laboratory model system

Within the frame of a joint project, the accumulation of the uranium and transuranium (TRU) species on some structural materials used at Soviet made VVER-type pressurized water reactors (such as heat exchanger tube of steam generators and stainless steel canister material) has been studied. The experiments were carried out in a laboratory model system. During the sorption studies, boric acid coolants provided by the Paks Nuclear Power Plant (Paks NPP) were circulated for a period of 30 h. Solution and tube samples obtained in the course of above experiments were analyzed by independent methods (??- and ??-spectrometry, ICP-MS, SEM-EDX, voltammetry and XPS). The experimental results reveal that: (i) the surface excess of the TRU nuclides studied is extremely low (less than 1% of a monolayer coverage); (ii) the surface excess of uranium species measured on the SG tube surfaces is significantly higher, after 30 h sorption period (??_sample = 1.0 ??g cm^?2 U ? 3.7 × 10^?9 mol cm^?2 UO₂) exceeds a monolayer coverage; (iii) the mechanistic features of the contamination processes (specific or non-specific adsorption, deposition of colloidal and/or disperse particles) depend decisively upon the nature of the studied radionuclides and the chemical structure and composition of the oxide layer formed on stainless steel surfaces.     

Intercomparison of techniques for estimation of sedimentation rate in the Sabah and Sarawak coastal waters

A total of eight sediment cores with 50 cm length were taken in the Sabah and Sarawak coastal waters using a gravity corer in 2004 to estimate sedimentation rates using four mathematical models of CIC, Shukla-CIC, CRS and ADE. The average of sedimentation rate ranged from 0.24 to 0.48 cm year^?1, which is calculated based on the vertical profile of ²¹⁰Pb_ex in sediment core. The finding also showed that the sedimentation rates derived from four models were generally shown in good agreement with similar or comparable value at some stations. However, based on statistical analysis of paired sample t-test indicated that CIC model was the most accurate, reliable and suitable technique to determine the sedimentation rate in the coastal area.     

Microwave assisted extraction for mercury speciation analysis

The application of microwave-assisted extraction (MAE) to the work-up of environmental and biological samples in the study of mercury speciation analysis has increased in recent years and is now increasingly accepted as a standard approach. The review provides a brief theoretical background of microwave heating and the basic principles of microwave energy used for extraction. The advantages and disadvantages of (a) MAE techniques, (b) the influence of the main parameters affecting the extraction, (c) statistical optimization approaches, and (d) strategies for method validation also are highlighted. Recent applications of MAE to mercury species analyses in biological samples, soils, sediments, and crude oil samples are surveyed and critically reviewed. In addition, comparisons of its use with other well-established extraction procedures are discussed.

Selective solid phase extraction of platinum on an ion imprinted polymers for its electrothermal atomic absorption spectrometric determination in environmental samples

An ion-imprinted polymer (IIP) was obtained by copolymerization of methacrylic acid (as a functional monomer) and ethylene glycol dimethacrylate (as a crosslinking agent) in the presence of various chelators for Pt(II) ion and using 2,2??-azo-bis-isobutyronitrile as the initiator. Specifically, acetaldehyde thiosemicarbazone (AcTSn) and benzaldehyde thiosemicarbazone (BnTSn) were used as chelators. The IIPs were applied as sorbents for solid-phase extraction of Pt(II) and Pt(IV) ions from aqueous solutions. The effects of acidity and flow rate of the sample, of elution conditions and of potentially interfering ions were investigated. The imprinting effect of analyte is clearly demonstrated by the fact that only the IIP is capable of quantitative retention of Pt(II) and Pt(IV) ions. The method works best in the pH range from 0.5 to 1 and from 3.5 to 9.5. The ions can be recovered with an acidic solution of thiourea. The Pt-AcTSn polymer displays better sorption properties for the separation of analytes. The selectivity coefficients of the Pt-AcTSn and control polymers for Pt(IV) in the presence Pd(II), Rh(III), Ru(III), Al(III) and Cu(II) were calculated, and the sorbent capacity for Pt(IV) was found to be 4.56???g?g?^-1. The method was successfully applied to the determination of Pt(IV) by electrothermal atomic absorption spectrometry in tap water, tunnel dust and anode slime samples.

New potentially tridentate amidinate ligand {o-MeOC6H4NC(Ph)N(SiMe3)}?. Synthesis and molecular structures of amidinate complexes of lithium [{o-MeOC6H4NC(Ph)N(SiMe3)}Li]2 and yttrium [{o-MeOC6H4NC(Ph)N(SiMe3)}YCl2(THF)2]2

The reaction of lithium silylamide [??o-MeOC₆H₄N(SiMe₃)}Li(OEt₂)]₂ with 2 equiv. of benzonitrile in THF at ??20 °C affords the lithium derivative of the new tridentate amidinate ligand [{o-MeOC₆H₄NC(Ph)N(SiMe₃)}Li]₂. The X-ray diffraction study showed that this complex has a dimeric structure due to the coordination of the N atoms and the ether group of one amidinate ligand to different Li atoms. The reaction of anhydrous YCl₃ with the resulting complex in THF gives the monoamidinate complex [{o-MeOC₆H₄NC(Ph)N(SiMe₃)}YCl₂(THF)₂]₂ regardless of the reagent ratio. The latter has a dimeric structure in the crystalline state as a result of the presence of two ??₂-bridging Cl atoms that link Y atoms. The ether groups of the amidinate ligands are not involved in the metal-ligand interaction.