幅相一致行波管非线性理论与计算机模拟

采用谐波互作用的行波管二维大信号非线性理论,建立了高频电路结构和外部工作条件零散模型,对影响增益、相位频率特性的主要因素进行了理论分析和数值计算,开发了可动态实时显示行波管工作状态的可视化科学计算软件,并利用该软件全面地分析了某管型的幅相一致特性,为新近研制的幅相一致行波管提供了很有价值的计算结果。     

掺杂聚苯乙烯制备研究

讨论了惯性约束聚变研究中采用化学及物理手段在聚苯乙烯（PS）材料掺杂卤素、硅、氘等非金属元素以及铁、铬、钛等金属元素的原理和方法。利用硅烷偶联剂对氧化物表面进行了预处理,采用本体聚合的方式将氧化物掺杂在PS网络之中,简述了它们在ICF中的应用。     

热处理条件对PVA薄膜阻氢性能的影响

采用XRD测定了PVA薄膜在不同热处理条件下的结晶度,并用自行设计的渗氢系数测量系统研究了在不同热处理条件下的PVA薄膜阻氢性能的变化规律。结果表明,PVA薄膜的热处理温度越高,其结晶度越高,越有利于提高PVA薄膜的阻氢性能,但热处理温度宜选择在180℃以下,以防止PVA薄膜热降解,另一方面,在PVA的玻璃化转变温度以下进行热处理同样能够提高PVA薄膜的阻氢性能,而醇解度较低的PVA薄膜在玻璃化转变温度以下经热处理后的阻氢性能提高的幅度较大。     

利用“神光-Ⅱ”激光装置多路光束叠加直接驱动下的冲击波平面性及稳定性

利用“神光-Ⅱ”的3路基频光输出及小透镜列阵束匀滑技术,通过优化设计和合理地选择光路组合,实现了多路叠加斜入射的驱动激光, 在靶材料中产生一个650~750μm范围内平面性良好的冲击波,有效地提高了“神光-Ⅱ”输出光束的利用率。同时,利用斜面靶进行的冲击稳定性实验表明,在靶面功率密度分别为3.26×1014及2.56×1014W/cm2时,冲击波至少在28.38~55.82和22.13~35.07μm的Al样品厚度内是稳定传播的。     

探寻社会学理论发展的非经验主义道路

默顿倡导以中层理论为中介来联结社会学的经验研究和一般理论研究,推动社会学理论的合理发展,这一倡导具有合理性。但是默顿试图通过以经验研究为基础优先发展中层理论,然后再通过对中层理论进行归纳来形成一般理论这种经验主义策略进而实现这一目标的想法却可能是错误的。正如中层理论并非从经验事实中归纳得来一样,一般理论也难以从中层理论中归纳而来。我们需要探索一条非经验主义的社会学理论发展道路。     

用Word中的eq域编辑化学符号

用近20个常用化学符号的编辑实例,介绍用Word中的eq域编辑化学符号的方法,通过对这些典型范例的学习,读者可以掌握Word的这种输入符号的高级方法,从而解决现阶段普遍存在的化学符号输入困难的问题,使化学排版更趋美观和规范。     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

含氧空位的氟掺杂二氧化锰助力稳定锌离子电池

将无机盐NH₄F加入到MnO₂的前驱体溶液中,通过高效、简单的一步水热法制备了具有氧缺陷的F掺杂α-MnO₂纳米棒(记为F-MnO₂)。氧空位和F掺杂对提高F-MnO₂的导电性、促进离子扩散、提高倍率性能起着至关重要的作用。另外,由于F掺杂,形成了F—Mn键,这可以有效地抑制放电产物中Mn³⁺的Jahn-Teller畸变,从而提高结构的稳定性。得益于这些协同效应,组装的Zn||F-MnO₂全电池在0.5 A·g^-1下,首圈放电比容量高达274 mAh·g^-1,且具有较长的循环寿命和优异的倍率性能。同时,通过循环伏安(CV)和恒流充放电(GCD)曲线证明了F-MnO₂的储能机制为H⁺和Zn²⁺的共嵌入/脱出过程。     

Ways of formulating wind speed in heat convection significantly influencing pavement temperature prediction

This paper investigates the influences of wind speed and of heat-convection coefficient on the temperature prediction of a slab. Numerical calculation of a slab temperature found that wind speed varies the slab temperature in a degree of 2–10 °C. More varying degrees occur at midday and in sunny day but less, at midnight and in a cloud day. These degrees also depend on the used heat-convection coefficients, which have different values in different models. Special emphases are paid to unearth the correlation between different heat convection coefficients and find the best alternative in the slab-temperature prediction.     

Synthesis and characterization of polythiophene block copolymer and fullerene derivative capable of “three‐point” complementary hydrogen bonding interactions and their application in bulk‐heterojunction solar cells

We report the synthesis and characterization of a polythiophene block copolymer (P4) selectively functionalized with diaminopyrimidine moieties and a thymine tethered fullerene derivative (F1). Self‐assembly between P4 and F1 through “three‐point” complementary hydrogen bonding is studied by ¹H NMR spectroscopy and differential scanning calorimetry. A large Stern‐Volmer constant (K_SV) of 1.2 × 10⁵ M^?1 is observed from fluorescence quenching experiments, revealing strong complexation between these two components. Solar cells employing P4 and F1 at different weight ratios as active layers are fabricated and tested; corresponding thin film morphologies are studied in detail by optical imaging and atomic force microscopy. Correlations between polymer complex structures, film morphologies, and device performance are discussed. Thermal stability of benchmark poly(3‐hexylthiophene) bulk heterojunction solar cells is found to be improved by the addition of a few weight percent of P4/F1 complexes as compatibilizers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3339–3350