超疏水沟槽表面通气减阻实验研究

减阻是解决航行体提速和增程的主要技术途径之一,对缓解日益严峻的能源危机极为重要.在重力式管道实验系统中,测试给出了湍流状态下不同通气速率时减阻率随雷诺数及沟槽无量纲间距的变化规律和气膜铺展状态,对比分析了单纯超疏水表面与超疏水沟槽表面上通气时减阻效果的差异.实验板材质为无色亚克力,沟槽结构采用机械方法加工,并在表面喷涂超疏水涂层.结果表明,持续通气能解决超疏水沟槽表面气膜层流失问题,实现气膜层长时间稳定维持;恒定雷诺数下,随通气速率增大,超疏水沟槽表面气膜铺展更趋均匀,减阻率上升;由于通气速率影响气膜横向扩展能力,致使恒定通气速率下,减阻率随雷诺数的变化呈现两种模式;在固定雷诺数及通气速率时,减阻率随沟槽尺寸的扩大先增后减, S~+≈76时减阻率最大.分析其原因在于,沟槽结构增大沾湿面积的同时,显著提升了通气状态下超疏水表面气膜层的稳定性,因而展示出与超疏水表面和沟槽表面均不相同的减阻规律,且效果更佳.     

孔洞形状对围岩极限承载能力影响的分析

为了研究工程岩体的宏观力学性能,采用数值模拟的方法研究了椭圆形孔洞形状对岩块极限承载能力的影响,找出了孔洞形状与极限承载能力之间的关系,同时研究了岩块声发射随着孔洞形状的变化规律。证明了应用数值模拟方法研究岩块的极限承载能力是研究工程岩体宏观力学参数特别是极限承载能力的有效方法。     

沉淀pH值对SAPO-34/CZA复合催化剂物化性质及CO2加氢反应影响

研究了液相沉淀包覆工艺终点pH值对SAPO-34/CZA复合催化剂物化性质和CO2氢还原制低碳烯烃催化性能的影响.借助XRD、SEM、BET、NH3-TPD和CO2-TPD等手段对不同复合催化剂的晶相组成、微观形貌、孔结构及表面酸碱性质进行了分析表征.研究结果表明,沉淀pH值对SAPO-34/CZA复合催化剂物化性质和CO2加氢制低碳烯烃催化性能影响较大.过高或过低的沉淀pH值制得复合催化剂中SAPO-34分子筛结晶度、微孔比表面积及表面碱量均有所下降,呈现以介孔为主的孔结构特征;而当pH值为7时,制得复合催化剂形成了包覆相结构和微-介复合孔结构(微孔比表面积53.1 m2·g-1,介孔比表面积59.8 m2·g-1,总比表面积为112.9 m2·g-1,总孔容0.4 cm3·g-1,平均孔径14.6 nm);在反应温度325℃,还原温度285℃,反应压力3.0 MPa,体积比H2:CO2=3.0,空速3500 mL·g-1·h-1反应条件下,CO2转化率为64.8;,低碳烯烃选择性为49.8;.与pH=9制得催化剂比较,CO2转化率和低碳烯烃选择性分别提高了26.2;和19.2;.     

SEGREGATED VECTOR SOLUTIONS FOR NONLINEAR SCHR?DINGER SYSTEMS IN R~2

We study the following nonlinear Schrodinger system where P(τ) and Q(τ) are positive radial functions,μ 0,v 0,and β∈ R is a coupling constant.This type of system arises,particularly,in models in Bose-Einstein condensates theory.Applying a finite reduction method,we construct an unbounded sequence of nonradial positive vector solutions of segregated type when β is in some suitable interval,which gives an answer to an interesting problem raised by Peng and Wang in Remark 4.1(Arch.Ration.Mech.Anal.,208(2013),305-339).     

近红外传感器在无线遥控计数系统中的应用

利用反射式近红外传感器、无线电收/发模块及四合一功能组合计数集成电路等器件,研究了无线遥控红外线计数器。当有产品通过红外线检测区域时,就会有一部分红外光信号经产品反射回来,被与红外线发射管同排安装的光敏接收管收到并转换成同频率的电信号,再经红外传感器模块内电路进行放大、比较处理,输出高电平信号,启动发射机工作。接收机收到发射机发来的无线遥控编码信号后,再经解调、解码电路处理,输出编码脉冲,对此脉冲信号进行计数,就实现了对产品的统计。整个系统为模块化结构,具有安装容易、抗震能力强、传输距离远、工作稳定、计数准确、高亮度数字显示等特点。可用于重工业、轻纺工业、食品工业、农牧业一些设备或流水线上对产量或流量进行遥控计数。     

Experimental investigation on wake profile detection based on laser scattering by bubbles

The optical system for detecting wake profiles based on laser backscattering by bubbles at 180°is reported, in which the monostatic optical geometry is adopted and the power density estimation is used to process bubble scattering signal.The profiles of wakes produced by a two-blade propeller with a diameter of 46 mm at 6000 and 8000 rpm are measured using this system.It is shown that the wake region can be identified,the wake with different shapes can be distinguished,and the fine structure within wakes can be detected.Also,the repeatability of the results is tested experimentally.Results show the feasibility of this system in wake profile detection.     

High power pulse amplification of ytterbium-doped double-clad fiber amplifier

By solving a set of time-dependent equations,the characteristics of the ytterbium-doped double-clad fiber amplifier are presented.Besides the steady state in the fiber of the upper-state population,pump power and amplified spontaneous emission without the input signal,the dynamic characteristics of the high power Gaussian pulse amplification like the evolution of pulse waveform distortion,upper-state population distribution and stored energy and pulse energy of the amplifier under the forward and backward pump, are simulated.The relations between the output pulse energy of the amplifier and the different input pulse peak power or pump power are also discussed.The models and results can provide important guide for the design and optimization of the high power pulse amplification.     

三氯化氮气体喷射自发分解实验研究

 在气体流动管中对三氯化氮气体喷射自发分解的现象进行了初步实验研究。在一根长80 cm，直径4 cm的圆柱形石英玻璃管中，用喷嘴向气体流动管内喷射NCl₃/He混合气体，观察到了NCl₃喷射分解时的红色火焰。测量了火焰光谱并进行了归属，认为该光谱是Cl₂(B→X)辐射跃迁。NCl­₃的喷射自发分解本质上是激波诱导发生的，即分子的动能转化为分子内能而引起的，生成的Cl原子及NCl₂自由基与NCl₃分子反应，从而得到持续燃烧火焰。实验结果表明了NCl₃自发分解反应可代替放电或燃烧作为Cl原子的来源。     

小角X射线散射应用研究若干进展

文章从小角X射线散射（small-ande X-ray scattering，SAXS）的理论分析出发，结合国内外SAXS理论和应用研究的最新动态，总结了文章作者所在的研究小组近年来在SAXS技术用于材料微结构表征方面的研究成果。主要包括以下三个方面的内容：（1）有机／无机杂化材料中电子密度波动的研究；（2）弦长度分布函数材料的周期结构的研究；（3）纳米粉末晶化过程的研究。     

Single Mode Er-Doped π-Phase-Shifted Distributed Feedback Fibre Grating Laser

A novel method incorporating the shielded method and the post-processing method has been proposed to fabricate the π-phase-shifted fibre grating. Then an Er-doped π-phase-shifted distributed feedback fibre grating laser has been fabricated using the grating. The laser threshold is 20mW. When pumped with 90mW light at 980nm, the laser gives an output of 1.1mW. Its signal-to-noise ratio is better than 60dB. It is demonstrated that the laser is single mode operation by means of a Fabry--Perot scanning interferometer.