Topological Effects on the Performance of Transportation Networks

We investigate the influence of the network topology on the performance （characterized by the total system cost and maximal tratffic volume） of transportation networks, where the weights are not static （constant）, but dynamic （a function of the flow on the link）. Four classes of networks are used in the simulation, including regular networks, random networks, small-world networks and scale-free networks. The initial simulation results show that topologies play important roles on the performance of transportation networks, and random networks have better performance than other networks. Also, we find that there are distinct difference of the link flow distribution for various networks in both the distribution function form and the span between the minimum and the maximum of the link flow, explaining the difference of the performance among distinct networks. These findings will be useful in network design problems of transportation systems.     

大气折射对可见光波段辐射传输特性的影响

折射是影响辐射传输的重要因素. 为分析大气折射对辐射传输的影响, 基于Monte Carlo方法, 给出了考虑大气折射的矢量辐射传输模型, 实现了均匀气层和耦合面处光子随机运动过程的模拟, 实现了直射光及漫射光Stokes矢量、偏振度和辐射通量等参数的计算. 在考虑和不考虑大气折射两种条件下, 验证了模型的准确性; 在纯瑞利散射条件下, 讨论了大气折射对不同方向漫射光Stokes矢量的影响; 在不同太阳天顶角、大气廓线、气溶胶及含云大气条件下, 分析了大气折射对辐射传输过程的影响. 结果表明: 大气折射对漫射光Stokes矢量的影响主要体现在天顶角70°–110°区间, 且随着太阳入射角增大, 其影响更为显著; 不同大气廓线情形下, 大气折射对Stokes矢量的影响不一致, 其原因是不同大气廓线对应的折射率廓线存在差异. 含云及含气溶胶大气条件下, 大气折射对辐射传输的影响变弱, 沙尘型及海盐型气溶胶条件下, 折射对辐射传输的影响强于可溶型气溶胶情形; 不同形状气溶胶条件下, 大气折射对辐射传输的影响也存在显著差异; 不同云高条件下, 大气折射对漫射光Stokes矢量的影响无显著差异, 但随着云光学厚度增大, 大气折射的影响减弱.     

黏弹细棒中直达波提取及其动态力学参数的宽频测试

黏弹性材料的动态力学参数可通过对材料样品中纵波测试并结合波速法计算得到。由于测试样品尺寸的限制,除了高损耗材料在高频范围外,不管是在样品端头或侧面都难以获得准确的直达波信号,导致参数测量不准确。针对这个问题,对一端固定一端自由的黏弹性细棒中的纵波传播过程进行了分析,提出了黏弹性细棒直达波提取的方法,并实现了黏弹性材料动态力学参数的宽频测试。采用宽带脉冲作为测试激励信号,利用两台激光测振仪对细棒的固定端和自由端的振动速度进行测试,计算得到细棒自由端处的直达波。然后,利用提取出的直达波信号进行波速法计算,得到了黏弹性细棒宽频范围内的储能模量和损耗因子,宽频脉冲测试结果与黏弹仪测试结果相吻合,验证了该方法的有效性。基于直达波提取的宽频测试方法不仅效率高,而且可以使波速法应用于更低的频段。     

Magnetotransport Properties of a Nodal Line Semimetal TiSi

We report the magnetoresistance(MR), de Haas-van Alphen(dHvA) effect and Hall effect measurements on a single crystal of TiSi, which is predicted to be a nodal line semimetal. With application of a magnetic field, a metal-to-insulator-like transition in ρ(T) and a nonsaturating MR are observed at low temperatures. The dHvA oscillations reveal a small Fermi-surface pocket with a nontrivial Berry phase. The analysis of the nonlinear Hall resistivity shows that TiSi is a multiband system with low carrier densities and high mobilities. All these results unambiguously prove the existence of Dirac fermions in TiSi.     

Light-scattering model for aerosol particles with irregular shapes and inhomogeneous compositions using a parallelized pseudo-spectral time-domain technique

To improve the modeling accuracy of radiative transfer, the scattering properties of aerosol particles with irregular shapes and inhomogeneous compositions should be simulated accurately. To this end, a light-scattering model for nonspherical particles is established based on the pseudo-spectral time domain(PSTD) technique. In this model, the perfectly matched layer with auxiliary differential equation(ADE-PML), an excellent absorption boundary condition(ABC) in the finite difference time domain generalized for the PSTD, and the weighted total field/scattered field(TF/SF) technique is employed to introduce the incident light into 3 D computational domain. To improve computational efficiency, the model is further parallelized using the Open MP technique. The modeling accuracy of the PSTD scheme is validated against Lorenz–Mie, Aden–Kerker, T-matrix theory and DDA for spheres, inhomogeneous particles and nonspherical particles, and the influence of the spatial resolution and thickness of ADE-PML on the modeling accuracy is discussed as well. Finally, the parallel computational efficiency of the model is also analyzed. The results show that an excellent agreement is achieved between the results of PSTD and well-tested scattering models, where the simulation errors of extinction efficiencies are generally smaller than 1%, indicating the high accuracy of our model. Despite its low spatial resolution, reliable modeling precision can still be achieved by using the PSTD technique, especially for large particles. To suppress the electromagnetic wave reflected by the absorption layers, a six-layer ADE-PML should be set in the computational domain at least.     

非线性光学效应与光速减慢

激光技术的发展为极限光速的测量和应用提供了有效工具。本主要介绍了与光速减慢有关的非线性光学知识和光速减慢的实验原理及方法。光速减慢实验中用到的低温Na原子气在探测激光和耦合激光的共同作用下处于量子相干态－－一种非线性极化状态,由于电磁感应透明效应（EIT）,探测光可以使介质的折射率改变并能透过Na原子气,使极限光速的测量和应用变为实现。     

Tm∶YVO4晶体中Tm3+的发光研究

测量了Tm∶YVO4 晶体的吸收光谱 ,以 34 6nm、36 3nm(1D2 )、475nm(1G4 )、6 98nm (3 F2 ,3 F3 )和 80 1nm(3 H4 )光激发时的发射光谱 ,以及位于 45 4nm (1D2 → 3 F4 )、475nm (1G4 → 3 H6)、6 46nm (1G4 → 3 F4 )、80 6nm(3 H4 →3 H6)的荧光谱线的激发光谱 ,对测量的结果进行了详细分析 ,解释了离子能级间的跃迁过程。提出了Tm∶YVO4 晶体基质与Tm3 + 之间的能量交换的概念和新的跃迁通道 ,证实了存在1D2 +3 H6→1G4 +3 F4 以及1G4 +3 H6→3 H4 +3 H5的能量传递过程 ,还可能存在交叉弛豫过程 1G4 +3 H6→3 F2 +3 F4 。这些过程使得Tm∶YVO4 晶体难以实现1D2 能级上转换发光 (4 5 4nm左右 ) ,但 475nm的上转换发光 (1G4 →3 H6)较强 ,3 F4 能级是潜在红外激光发射能级。     

高能π–p碰撞J/ψ+γ硬衍射产生

用I–S模型与夸克偶素的色八重态产生机制,对πp碰撞J/ψ+γ协同产生的单衍射过程的微分截面及总截面进行计算,结果表明,把J/ψ+γ协同产生的单衍射过程和单举过程相结合,可以探测Pomeron中的胶子成分并对硬衍射因子化进行检验.     

苯并咪唑取代胺及其配合物光谱分析

本文阐述了用原子吸收光谱测定三（2－苯并咪唑亚甲基）胺和二（2－苯并咪唑亚甲基）胺与Cu2 的配合物中心原子,并对上述配体及配合物用紫外光谱法和红外光谱法进行了研究,从而解释了配合物分子结构。     

厚胶光刻非线性畸变的校正

利用厚胶光刻技术制作大深度微结构元件是一种有效的途径,但厚胶光刻过程中的非线性畸变对光刻面形质量的严重影响限制了该技术的应用,基于此,提出了一种对掩模透射率函数进行校正的方法。分析空间像形成及其在光刻胶内传递、曝光、显影等过程中非线性因素的影响,利用模拟退火算法对掩模透射率函数进行校正,以提高光刻面形质量,并以凹面柱透镜为例,给出了校正前后的显影轮廓模拟结果,其校正后浮雕面形的体积偏差仅为2.63%。该方法在有效改善面形质量的同时,并没有引起掩模的设计、制作难度及费用增加,这对于设计、制作高质量的微结构元件有重要意义。