Molecular simulation study of effect of molecular association on vapor-liquid interfacial properties

Vapor-liquid interfacial properties of square-well associating fluids are studied via transition-matrix Monte Carlo simulation. Results for one-site and two-site association models are presented. Coexistence properties, surface tension, cluster distribution, density profile, and orientation profile are presented. Molecular association affects the interfacial properties and cluster fractions more than it affects the bulk densities. We observe that the surface tension exhibits a maximum with respect to association strength. This behavior is in agreement with the recent study of Peery and Evans for one site system using a square-gradient approach.     

Molecular simulation study of the effect of pressure on the vapor-liquid interface of the square-well fluid

We examine a model system to study the effect of pressure on the surface tension of a vapor-liquid interface. The system is a two-component mixture of spheres interacting with the square-well (A-A) and hard-sphere (B-B) potentials and with unlike (A-B) interactions ranging (for different cases) from hard sphere to strongly attractive square well. The bulk-phase and interfacial properties are measured by molecular dynamics simulation for coexisting vapor-liquid phases for various mixture compositions, pressures, and temperatures. The variation of the surface tension with pressure compares well to values given by surface-excess formulas derived from thermodynamic considerations. We find that surface tension increases with pressure only for the case of an inert solute (hard-sphere A-B interactions) and that the presence of A-B attractions strongly promotes a decrease of surface tension with pressure. An examination of density and composition profiles is made to explain these effects in terms of surface-adsorption arguments.     

A 3-D noninterpenetrating diamondoid network of a decanuclear copper(I) complex

The solvothermal reaction of CuCl(2).2H(2)O with pyridine-4-thiol and ethanol yielded a novel photoluminescent 3-D polymeric complex with an interesting decorated diamondoid network that is constructed of decanuclear copper(I) cluster units and mu(4)-Cl ligands. The in situ generation of CuSO(4).5H(2)O implies the spontaneous occurrence of desulfurization and redox reactions in the present system.     

Mass spectrometrically detected directly coupled high performance liquid chromatography/nuclear magnetic resonance spectroscopy/mass spectrometry for the identification of xenobiotic metabolites in maize plants

Reconstructed ion chromatograms have been used to identify relevant high performance liquid chromatography (HPLC) peaks in a directly coupled high performance liquid chromatography/nuclear magnetic resonance spectroscopy/mass spectrometry (HPLC/NMR/MS) experiment. This has been applied to a study of the metabolism of a model compound, 5-nitropyridone (2-hydroxy-5-nitropyridine), in maize plants grown hydroponically. By monitoring the on-flow reconstructed ion chromatogram corresponding to the 5-nitropyridone fragment at m/z 143, and additional molecular ions corresponding to metabolites identified as products from similar compounds, relevant peaks were identified rapidly for subsequent stopped-flow 1H NMR spectroscopic analysis. The combination of coupled HPLC/NMR/MS enabled the direct identification of three metabolites, namely the N-glucoside, N-malonylglucoside, and O-malonylglucoside. This work demonstrates the power of HPLC/NMR/MS for the structural elucidation of xenobiotic metabolites in complex biological matrices (such as plant material) with minimal sample preparation. In particular, using mass spectrometry for the initial identification of relevant HPLC peaks allows the analysis of complex samples without the necessity for other spectroscopic markers, such as 19F NMR signal for fluorinated compounds or UV spectroscopy for molecules with strong UV chromophores.     

Solid-Phase Synthesis of Phenylacetylene Oligomers Utilizing a Novel 3-Propyl-3-(benzyl-supported) Triazene Linkage

Sequence-specific phenylacetylene oligomers consisting of functionalized monomers (hexyl benzoate, hexyl phenyl ether, benzonitrile, and tert-butylphenyl) are synthesized in gram quantities using solid-phase methods. Growing oligomers are attached to a divinylbenzene cross-linked polystyrene support by the 1-aryl-3-propyl-3-(benzyl-supported) triazene moiety. This linkage is obtained by reaction of arenediazonium tetrafluoroborate salts with a n-propylamino-modified Merrifield resin. Condensation strategies are described, producing oligomers with higher yields and simplified procedures compared to solution-phase methods. Terminal acetylene is protected with a trimethylsilyl group. After deprotection of the resin-bound terminal acetylene, an aryl iodide monomer or an aryl iodide-terminated oligomer is coupled to the supported oligomer using a palladium(0) catalyst. The cycle can be repeated to produce sequence-specific oligomers of varying length and functionality. The resulting oligomers are liberated from the polymer support by cleavage of the 1-aryl-3-propyl-3-(benzyl-supported) triazene group by reaction with iodomethane producing an aryl iodide.     

液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

An alternative sampling algorithm for use in liquid chromatography/tandem mass spectrometry experiments

In liquid chromatography/tandem mass spectrometry (LC/MS/MS) analyses of complex peptide mixtures, dynamic exclusion functions are used to minimize repeat selections of identical precursors for collision induced dissociation (CID). We describe a new algorithm for the dynamic exclusion of m/z values during LC/MS/MS. Full-scan based peak exclusion (Fulspec) uses a simplified model of chromatographic peak formation to detect and exclude contaminants present throughout the run or that lead to broad peaks. Therefore, instead of excluding peptides from fragment analysis according to a rigidly predefined time window, the chromatographic properties of the detected analytes are used. The algorithm was tested on two datasets derived from previously published experiments. Fulspec achieves a distribution of CID spectra with minimal tailing on the retention time axis, without resorting to rigid exclusion of m/z values. The procedure further excludes intensities with a bias towards low-quality CID spectra. This combination frees up valuable analytical capacity. The underlying intensity vs. quality analyses challenge the assumption that abundant precursors automatically give the best identifications. Further validation of the algorithm will require its incorporation by equipment manufacturers into the instrument control programs.     

Morphological study of the organization behavior of rod-coil copolymers and their blends in thin solid films

A detailed study of the self-assembly ability of triblock coil-rod-coil copolymers containing a rigid di(styryl)-anthracene segment covalently linked to oxadiazole-based blocks and their binary blends with oxadiazole-based homopolymers is presented here. The self-organized microdomains seem to pack into a fascinating ordered hexagonal structure obtained at a critical concentration without any significant influence of the sample preparation method, based on evidence obtained by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and fluorescence microscopy studies. The compatibilization efficiency of these coil-rod-coil copolymers in polymer blends composed of an electron-accepting polyoxadiazole and a luminescent polyanthracene-based pair was studied by atomic force microscopy (AFM). The common feature of all observed morphologies is the compatibilizing function of the rod-coil molecule, which intercalates between the incompatible domains to prevent the formation of well-defined phase separated nanostructured surfaces.     

Synthesis of [ethylene-1-(eta(5)-4,5,6,7-tetrahydro-1-indenyl)-2- (eta(5)-4',5',6',7'-tetrahydro-2'-indenyl)]titanium dichloride, the elusive isomer of the Brintzinger-type ansa-titanocenes

We present a short synthesis of 1-(2-indenyl)-2-(3-indenyl)ethane (5) and a method for its conversion to the ansa-metallocene [ethylene(eta5-inden-1-yl)(eta5-inden-2-yl)]titanium dichloride (13). The synthetic strategy applied to prepare bisindene 5 relies on the efficient alkylation of 2-(phenylsulfonyl)indane followed by HMPA-assisted E1cB-elimination of phenylsulfinate. This tandem sequence circumvents the predisposition of indene to undergo C(1)-alkylation and enables access to C(2)-substituted indenes. The key step in the synthesis of the title ansa-titanocene (4) features a previously unreported equilibration step to generate the bis(indenide anion) of 5. Complexation with TiCl4.(THF)2 followed by hydrogenation of the product metallocene furnishes ansa-titanocene 4.     

Surface tension of quantum fluids from molecular simulations

We present the first molecular simulations of the vapor-liquid surface tension of quantum liquids. The path integral formalism of Feynman was used to account for the quantum mechanical behavior of both the liquid and the vapor. A replica-data parallel algorithm was implemented to achieve good parallel performance of the simulation code on at least 32 processors. We have computed the surface tension and the vapor-liquid phase diagram of pure hydrogen over the temperature range 18-30 K and pure deuterium from 19 to 34 K. The simulation results for surface tension and vapor-liquid orthobaric densities are in very good agreement with experimental data. We have computed the interfacial properties of hydrogen-deuterium mixtures over the entire concentration range at 20.4 and 24 K. The calculated equilibrium compositions of the mixtures are in excellent agreement with experimental data. The computed mixture surface tension shows negative deviations from ideal solution behavior, in agreement with experimental data and predictions from Prigogine's theory. The magnitude of the deviations at 20.4 K are substantially larger from simulations and from theory than from experiments. We conclude that the experimentally measured mixture surface tension values are systematically too high. Analysis of the concentration profiles in the interfacial region shows that the nonideal behavior can be described entirely by segregation of H(2) to the interface, indicating that H(2) acts as a surfactant in H(2)-D(2) mixtures.