Theoretical Investigation on Excitation,Ionization and Capture in H（1s, 2s） ＋ H（1s, 2s） Collisions

Cross sections of electron-loss in H（1s）＋ H（1s） collisions and total collisional destruction of H（2s） in H（1s） 4- H（2s） collisions are calculatted by four-body classical-trajectory Monte Caylo （CTMC） method and compared with previous theoretical and experimental data over the energy range of 4-100 keV. For the former a good agreement is obtained within different four-body CTMC calculations, and for the incident energy Ep 〉 10 keV, comparison with the experimental data shows a better agreement than the results calculated by the impact parameter approx- imation. For the latter, our theory predicts the correct experimental behaviour, and the discrepancies between our results and experimental ones are less than 30%. Based on the successive comparison with experiments, the cross sections for excitation to H（2p）, single- and double-ionization and H- formation in H（2s）＋H（2s） collisions are calculated in the energy range of 4-100 keV for the first time, and compared with those in H（1s）＋H（1s） and H（1s）＋U（2s） collisions.     

Dependence of Crystal Quality and β Value on Synthesis Temperature in Growing Gem Diamond Crystals

High quality Ib gem diamond single crystals were synthesized in cubic anvil high-pressure apparatus （SPD- 6 × 1200） under 5.4GPa and 1230℃-1280℃. The （100） face of seed crystal was used as growth face, and Ni70Mn25Co5 alloy was used as solvent/catalyst. The dependence of crystal quality andβ value （the ratio of height to diameter of diamond crystal） on synthesis temperature was studied. When the synthesis temperature is between 1230℃ and 1280℃, theβ value of the synthetic high-quality gem diamond crystals is between 0.4 and 0.6. The results show that when theβ value is between 0.4 and O. 45, the synthetic diamonds are sheet-shape crystals; however, when theβ value is between 0.45 and 0.6, the synthetic diamonds are tower-shape crystals. In addition, when theβ value is less than 0.4, skeleton crystals will appear. When theβ value is more than 0.6, most of the synthetic diamond crystals are inferior crystals.     

籽晶{100}面形状对高温高压合成金刚石大单晶的影响

选用不同形状的{100}金刚石籽晶面,以NiMnCo合金为触媒,利用温度梯度法在压力为5.5 GPa、温度为1260～1300℃的条件下,合成Ib型金刚石大单晶。通过光学显微镜和电子显微镜对晶体的形貌进行表征。研究发现,将合成籽晶的{100}晶面切割成不同形状,只会令晶体的长宽比发生改变,晶体并不会因籽晶形状的改变而偏离{100}晶体的正常形貌。晶体的合成质量受到籽晶长宽比的影响:在籽晶长宽比较小的情况下,晶体的合成质量能够得到保证;但当籽晶长宽比过大时,合成晶体的下表面出现较多缺陷。关于籽晶形状对晶体生长情况影响的研究,揭示了籽晶形状与合成晶体形貌之间的关系,有利于更深入理解晶体的生长过程和外延生长机理,对于今后合成不同形貌的金刚石具有借鉴意义。同时此项研究有助于扩大籽晶的选取范围,降低籽晶的选择难度,提升工业级金刚石的利用率,为合成金刚石大单晶的籽晶选取提供了技术支持。     

基于SAGD稠油开采余热利用的冷热电三联供系统

将水平井蒸汽辅助泄油(SAGD)技术运用于稠油开采可提高采收率,对超稠油油藏的开发具有重要意义。但伴随着SAGD工程的生产运行,大量中低温余热热能被浪费。针对稠油开采余热利用问题,本文设计了一种基于SAGD稠油开采余热利用的冷热电三联供系统,构建了系统热力学模型,利用Aspen HYSYS软件进行模拟计算,分析了关键热力学参数对系统热力学性能的影响。结果表明:卡琳娜循环的蒸发压力降低,透平进口温度增加,以及调整氨气组分为0.7,均有利于增加循环发电量、余热回收率和拥效率;低温制冷循环压缩比和冷凝温度的降低,可以提高制冷量和制冷效率;按卡琳娜循环余热回收率92.5%计算,系统最多可回收余热9.25×10~5 MJ/h,按0.9 CNY/kW·h电价计算,系统可带来约270万元/年的经济效益。     

涟波箱水面波的传播速度问题

本文分析和描述涟波箱水面波中各质点的运动规律,应用“大学物理”中的理想流体稳定流动中的伯努利原理,对涟波箱水波传播速度与波长和水深的关系予以讨论,以了解涟波箱水面波传播速度的变化规律,有助于进一步理解涟波箱演示器的原理.     

积分球内的铷原子激光冷却

研究了积分球内激光冷却原理,设计积分球时对积分球的反射率、尺寸及球上开孔大小对于激光冷却的影响进行了讨论. 进行了积分球冷却⁸⁷Rb实验,实验结果表明积分球有效的冷却了球腔中的铷原子,获得了积分球内冷原子的吸收信号以及冷原子随冷却光失谐的变化曲线. 关键词： 漫反射光场 积分球 全光冷却     

双材料界面裂纹平面问题的半权函数法

应用半权函数法求解双材料界面裂纹的平面问题．由平衡方程、应力应变关系、界面的连续条件以及裂纹面零应力条件推导出裂尖的位移和应力场,其特征值为lambda及其共轭．设置特征值为lambda的虚拟位移和应力场,即界面裂纹的半权函数A·D2由功的互等定理得到应力强度因子KⅠ和KⅡ以半权函数与绕裂尖围道上参考位移和应力积分关系的表达式．数值算例体现了半权函数法精度可靠、计算简便的特点．     

Study of nanocrystalline Fe－Al－N soft magnetic thin films

Fe－Al－N films were fabricated by reactive sputtering using a radio-frequency magnetron sputtering system. The effects of Al and N content and annealing temperature on microstructure and magnetic properties were investigated. The Fe－Al－N films, which have good soft magnetic properties, consist of nanocrystalline α-Fe grains and a small amount of other phases in the boundaries of α-Fe grains. The average α-Fe grain size is about 10－15nm. A slight amount of Fe－N and Al－N compounds precipitate in the boundaries of α-Fe grains and suppress their growth. Annealing improves the soft magnetic properties slightly by releasing the residual stress and reducing defects.     

爆轰驱动金属半球飞层自由面速度的测量

钝感炸药爆轰产物驱动金属飞片的研究工作直接同武器设计相联系。为探索研究爆轰产物驱动金属飞片的运动规律及金属材料本构关系对爆轰产物驱动飞片自身飞行的影响，用任意反射面速度干涉仪VISAR（Vclocity Interfcrometer Systcm for Any Rcflector）对不同厚度的铜半球飞层上多个点的速度历程进行了测量，得到了飞层运动的速度-时间曲线，给理论分析提供了实验数据。