线性分析法来解热脱附动力学参数

TPD方法是研究表面常规手段之一.对于如何从实验结果获得正确的脱附动力学参数,已有不少工作发表。然而,现有方法均存在一定的适用范围,尤其是重叠谱解叠,仍然没有很好地解决。本文介绍的线性分析法,不仅适用于简单的一级和二级脱附TPD谱的解析,而且也适用于重叠谱解叠,从而为实验上确定动力学级数和复杂谱解叠提供了依据。     

配合物[Cu_2(TS)(H_2O)]·H_2O的自组装制备、晶体结构和电化学性质

利用单核配合物Na2 CuTS·H2 O在溶剂中的不稳定性质 ,自分解并重新组装得到了双核配合物 [Cu2 (TS)(H2 O) ]·H2 O .配合物为单斜晶系 ,空间群P2 1/C ,晶胞参数为a =0 .80 830 (16 )nm ,b =1.70 79(3)nm ,c =1.4 0 73(3)nm ,β =10 5 .0 8(3)° ,V =1.86 5 4 (6 )nm3 ,Z =4 ,最终一致性因子R =0 .0 6 4 4 .该分子结构为双核单元 ,金属原子通过两个酚氧原子桥联在一起 .结合晶体结构对配合物作了电化学研究     

壳多糖与丙烯酸丁酯的乳液接枝共聚研究

以十二烷基苯磺酸钠为乳化剂，过硫酸钾－亚硫酸氢钠为引发剂，研究了壳多糖与丙烯酸丁醋的乳液共聚合，结果表明当［Ｋ２Ｓ２Ｏ８］＝［ＮａＨＳＯ３］＝２．５７×１０－３ｍｏｌ·１－１，［ＢＡ］＝０．６８ｍｏｌ．１－１，［Ｃｈｉｔｏｓａｎ］＝１９．２ｇ·ｌ－１，在７０℃下反应５小时，共聚反应的接技率和接枝效率均较高．用红外光谱，差热分析，Ｘ射线衍射，扫描电镜对接技共聚物进行了表征，此外测试了共聚物胶乳成膜的机械性能，表明用丙烯酸丁酯对壳多糖进行接枝改性，可提高壳多糖的韧性，扩大其应用范围．     

N-取代乙醇胺对4-氟-1-酰基苯的选择性胺化反应

研究了4-氟-1-酰基苯和N-取代乙醇胺在酰胺类溶剂或不加溶剂中反应, 在不需要金属催化剂和另外加碱的条件下选择性地得到胺化产物, 实验操作简单, 符合S_NAr取代机理. 一系列羟乙基胺基酰基苯产物均经过元素分析(HRMS), IR, MS和NMR的测定.     

2-氯甲基苯并恶唑的Darzens反应研究

本文报道用2-氯甲基苯并恶唑作为卤代物,进行Darzens反应。义固体氧化钾作碱,在非质子极性溶剂N,N-甲基酰胺中,将其与相应的羰基化合物反应, 生成了环氧化合物。     

Pt3Co核-Pt壳型纳米粒子的制备及磁性

Pt₃Co alloy nanoparticles were prepared by the reduction of H₂PtCl₆ and Co(OOCCH₃)₂ using NaBH₄ as a reducing agent. The Pt₃Co core-Pt shell nanoparticles (Pt₃Co@Pt) were synthesized using hydrogen absorption reduction and characterized by plasma-atomic emission spectrometry (ICP), transmission electron microscopy (TEM), X-ray diffraction (XRD) and SQUID magnetometer. The results show that average size of Pt₃Co@Pt nanoparticles is 3.6 nm with a standard deviation of 0.9 nm. Heating Pt₃Co nanoparticles in air at 700 ℃ for 1 h, Co in Pt₃Co nanoparticles was oxidized to Co₃O₄ and CoO; while no oxidation tendency was detected for Pt₃Co@Pt nanoparticles. The crystallize structure of Pt₃Co@Pt changed from the face centered cube (fcc) to the face centered tetragonal (fct) after the heating treatment. The coercivity of the heated Pt₃Co@Pt reached to 276 Oe at room temperature.     

罗丹明B-过氧乙酸-氢氧化钠化学发光法测定痕量硫

基于硫离子对罗丹明B 过氧乙酸 NaOH化学发光有较强的增敏作用,建立了流动注射化学发光增强法测定痕量硫的新方法。该法的线性范围为3.0×10-8～8.0×10-7g/mL,检出限为3.5ng/mL,相对标准偏差为2.2%(1.0×10-7g/mLS2-,n=11)。此法已用于环境水样中痕量硫的测定。     

双核配合物[Cu2(TS)(H2O)]·CH3OH的自组装制备和晶体结构

The binuclear complex [Cu₂(TS)(H₂O)]·CH₃OH, where TS denotes the binucleating ligand derived from the schiff base N,N′-bis(3-carboxylsalidene)trimethylenediamine, was obtained from the self-decomposition of mononuclear complex Na₂CuTS·H₂O. It crystallizes in the monoclinic system, space group P2₁/c. The lattice parameters are a=11.935(2)?,b=15.667(3)?,c=11.621(2)?,β=111.60(3)°,V=2020.2(7)?³, Z=4 with R=0.0467. The structure is made of binuclear units, in which two copper atoms are bridged by two phenolic oxygen atoms. The “inside”copper atom is coordinated by two nitrogens, two phenolic oxygens in a planar coordi-nation site, the copper atom deviates from the mean plane by 0.47?. The “outside” copper atom is five coordinated by two phenolic oxygen atoms、two equatorial carboxyl oxygen atoms and one axial water oxygen atom in a distorted tetragonal cone site, the copper atom is pulled out of the equatorial plane by 0.46?.     

聚环氧乙烷与聚2—乙烯基吡啶共混物的导电率及高氯酸锂的…

研究了聚环氧乙烷（ＰＥＯ）／聚２－乙烯基吡啶（Ｐ２ＶＰ）的共混物分别经ＬｉＣＬＯ４、四氰基代苯醌二甲烷（ＴＣＮＱ）及两者共同掺杂后其共混物的离子、电子及混合导电率，当ＰＥＯ与Ｐ２ＶＰ的重量比分别为６／４、５／５及４／６时，共混物的混合导电率大于相应的离子及电子导电率的总和，呈现协同效应，从共混物外观的研究发现ＬｉＣＬＯ４能作为ＰＥＯ／Ｐ２ＶＰ共混体系的增容剂。