Experimental investigation on wake profile detection based on laser scattering by bubbles

The optical system for detecting wake profiles based on laser backscattering by bubbles at 180°is reported, in which the monostatic optical geometry is adopted and the power density estimation is used to process bubble scattering signal.The profiles of wakes produced by a two-blade propeller with a diameter of 46 mm at 6000 and 8000 rpm are measured using this system.It is shown that the wake region can be identified,the wake with different shapes can be distinguished,and the fine structure within wakes can be detected.Also,the repeatability of the results is tested experimentally.Results show the feasibility of this system in wake profile detection.     

High power pulse amplification of ytterbium-doped double-clad fiber amplifier

By solving a set of time-dependent equations,the characteristics of the ytterbium-doped double-clad fiber amplifier are presented.Besides the steady state in the fiber of the upper-state population,pump power and amplified spontaneous emission without the input signal,the dynamic characteristics of the high power Gaussian pulse amplification like the evolution of pulse waveform distortion,upper-state population distribution and stored energy and pulse energy of the amplifier under the forward and backward pump, are simulated.The relations between the output pulse energy of the amplifier and the different input pulse peak power or pump power are also discussed.The models and results can provide important guide for the design and optimization of the high power pulse amplification.     

基于选择性支持向量机集成的混沌时间序列预测

提出了一种基于聚类的选择性支持向量机集成预测模型.为提高支持向量机集成的泛化能力，采用自组织映射和K均值聚类算法结合的聚类组合算法，从每簇中选择出精度最高的子支持向量机进行集成，可以保证子支持向量机有较高精度并提高了子支持向量机之间的差异度.该方法能以较小的代价显著提高支持向量机集成的泛化能力.采用该方法对Mackey-Glass混沌时间序列和Lorenz系统生成的混沌时间序列进行预测实验，结果表明可以对混沌时间序列进行准确预测，验证了该方法的有效性. 关键词： 支持向量机 集成 混沌时间序列 聚类     

三氯化氮气体喷射自发分解实验研究

 在气体流动管中对三氯化氮气体喷射自发分解的现象进行了初步实验研究。在一根长80 cm，直径4 cm的圆柱形石英玻璃管中，用喷嘴向气体流动管内喷射NCl₃/He混合气体，观察到了NCl₃喷射分解时的红色火焰。测量了火焰光谱并进行了归属，认为该光谱是Cl₂(B→X)辐射跃迁。NCl­₃的喷射自发分解本质上是激波诱导发生的，即分子的动能转化为分子内能而引起的，生成的Cl原子及NCl₂自由基与NCl₃分子反应，从而得到持续燃烧火焰。实验结果表明了NCl₃自发分解反应可代替放电或燃烧作为Cl原子的来源。     

小角X射线散射应用研究若干进展

文章从小角X射线散射（small-ande X-ray scattering，SAXS）的理论分析出发，结合国内外SAXS理论和应用研究的最新动态，总结了文章作者所在的研究小组近年来在SAXS技术用于材料微结构表征方面的研究成果。主要包括以下三个方面的内容：（1）有机／无机杂化材料中电子密度波动的研究；（2）弦长度分布函数材料的周期结构的研究；（3）纳米粉末晶化过程的研究。     

Single Mode Er-Doped π-Phase-Shifted Distributed Feedback Fibre Grating Laser

A novel method incorporating the shielded method and the post-processing method has been proposed to fabricate the π-phase-shifted fibre grating. Then an Er-doped π-phase-shifted distributed feedback fibre grating laser has been fabricated using the grating. The laser threshold is 20mW. When pumped with 90mW light at 980nm, the laser gives an output of 1.1mW. Its signal-to-noise ratio is better than 60dB. It is demonstrated that the laser is single mode operation by means of a Fabry--Perot scanning interferometer.     

Transmission Properties of W3 Y-Branch Filters in Two-Dimensional Photonic Crystal Slabs

A highly efficient W3 Y-branch filter in a two-dimensional photonic crystal slab with triangular lattice of air holes is designed and fabricated, and its transmission properties are measured. By accurately adjusting the size of the resonant cavities, the minimum wavelength spacing of 7 nm between two channels is realized. The corresponding resonant wavelengths of the two cavities agree well with the calculated ones. This implies that this kind of fiIter may be promising in integrated wavelength division multiplexing system.     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO2前后的光学特性,即介电函数虚部ε2(w),光学吸收系数I(w)和反射率R(w).并从能带结构上解释了为什么掺N后锐钛矿型TiO2的光学谱在2.93,3.56和3.97 eV处相对掺杂前会出现3个峰值的原因.从光谱图上分析得出,掺杂后TiO2要发生红移现象,实验现象证实了这一结果.     

基于叠栅技术的二维亚波长周期结构成像设计

用光子学方法研究了叠栅技术中,当试件光栅被拉压和旋转后,叠栅条纹的空间周期和相对于基准光栅的取向,试件光栅被拉压后的节距等相关问题。根据衍射光波的空间周期可能大于试件光栅空间周期的特点,对二维亚波长周期结构衍射成像进行了设计研究。首先,对二维亚波长周期结构衍射物进行编码,以获得包含编码光栅空间信息的均匀波;其次,使编码得到的均匀波通过光学系统,并被放大到CCD相机所能辨识的大小;再次,经解码光栅解码,滤掉编码波,最终获得二维亚波长周期结构物的空间结构信息,达到超分辨的目的。同时,对成像过程进行了较为详尽的分析,对编码器、解码器的位置以及它们相对衍射物的取向进行了设计研究,对滤波器的选择给予了必要的说明,指出了取得超分辨成像的关键。     

解析几何教学要突出坐标法思想——“直线与圆的位置关系”教学实践与思考

南方某中学举办了一次“自主课堂,同课异构”大型教学研讨活动,邀请笔者上一堂课,指定教学内容是《普通高中课程标准实验教科书·数学(必修二)》(人教A版),“4.2.1直线与圆的位置关系”.以下介绍的是教学过程及若干思考,供同行参考.