The Chemistry of Tetrafluoroallene： One－pot Synthesis of Trifluoromethylindolizines from 1,3－Diiodo－1,1,3,3－tetrafluoropropane by 1,3－Dipolar Cycloaddition

Heating a mixture of 1, 3-diiodo-1, 1, 3, 3-tetrafluoropropane (2), K2CO3, pyridinium bromides (3) in CH3CN at 65℃ for 10 h gives the corresponding trifluoromethylindolizines.     

贫电子环丙烷衍生物与胂叶立德的反应研究

The reaction of electron-deficient cyclopropane derivatives, cis-1-methoxycarbonyl-2-aryl-6,6-dimethyl-5,7dioxospiro[2,5]octa-4,8-diones with benzoylmethylenetriphenylarsorane (2) and methoxycarbonylmethylenetriphenylarsorane (4) was found to form cis,trans-l-methoxycarbonyl-2-aryl-3-benzoyl-7,7-dimethyl-6,8-dioxospiro[3,5]nona-5,9-dione (3a-3e) and trans,cis,trans-5-[2‘-methoxycarbonyl-2‘-(triphenylarsoranylidene)acetyl]-6oxo-3-aryl-tetrahydro-pyran-2,4-dicarboxylic acid dimethyl esters (5a-5c) respectively with high stereoselectivity. The possible reaction mechanisms for the formation of the different products were also orooosed.     

合成甲醇的催化剂Rh-ZnO/MWNTs的研究

研究新型的由多壁碳纳米管(MWNTs)负载的， ZnO助催的铑基甲醇合成催化剂. 当铑含量达到4％(w)时，催化剂具有较高的比表面积(99.6 m2•g－1), 催化剂的反应活化能为68.8 kJ•mol－1.在563 K, 1 MPa下，催化剂的最高催化活性和甲醇选择性分别为411.4 mg/gcat.•h和96.7％. TEM、TPR和TPD等表征结果显示，碳纳米管能增加Rh在催化剂表面的分散度，提高催化剂的还原温度并能增加氢物种的吸附量，这些结果将有助于更好地了解催化剂中各组分间的协同作用和催化活性中心本质.     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.     

R·BH_3中B-H键与酚类物质的反应研究

硼烷化合物既能表现路易斯酸性,因分子B-H键中的氢带负电荷,又可表现出路易斯碱性.本文系统研究了R·BH_3(R=THF,DMA,NH_3)与酚类物质在常温常压无催化剂条件下的反应,发现R·BH_3(R=THF,DMA)硼烷中与B相连的负电性氢能够全部与酚中与氧相连的正电性氢发生反应,生成含BO_3的硼酸酯和氢气,但NH_3·BH_3却不与酚发生反应.DMA·BH_3与间苯二酚反应生成聚合物.根据实验结果,我们推测随着与硼配位的路易斯碱的配位能力/碱性减弱(NH_3DMATHF),B-H活性增强,即R·BH_3与酚类物质的反应程度按照NH_3·BH_3DMA·BH_3THF·BH_3顺序依次增强.结合实验和理论计算发现,硼烷与酚的反应是分四步进行的,反应第一步的主要影响因素是与硼配位的配体离去的难易,而B-Hδ-…δ+H-O双氢键在第二步到第四步反应中发挥了重要作用.配体的性质及B-Hδ-…δ+H-O双氢键在反应中发挥着重要作用.     

Synchrotron radiation intensity and energy of runaway electrons in EAST tokamak

A detailed analysis of the synchrotron radiation intensity and energy of runaway electrons is presented for the Experimental Advanced Superconducting Tokamak(EAST). In order to make the energy of the calculated runaway electrons more accurate, we take the Shafranov shift into account. The results of the analysis show that the synchrotron radiation intensity and energy of runaway electrons did not reach the maximum at the same time. The energy of the runaway electrons reached the maximum first, and then the synchrotron radiation intensity of the runaway electrons reached the maximum.We also analyze the runaway electrons density, and find that the density of runaway electrons continuously increased. For this reason, although the energy of the runaway electrons dropped but the synchrotron radiation intensity of the runaway electrons would continue rising for a while.     

超导磁共振仪器设备国产化现状及挑战

磁共振在化学分析和医学影像等领域发挥着不可或缺的作用，而磁共振仪器设备是开展磁共振研究的必要前提.长期以来，国外仪器厂商在我国磁共振仪器市场居于垄断地位.近年来，随着我国在磁共振仪器研发和产业化方面不断取得进展，市场份额为外商垄断的局面已大为改观.本文调研综述了我国磁共振仪器设备研制的现状，以及面临的若干挑战.     

便携式拉曼光谱仪技术进展及在海关现场查验中的应用

简述了便携式拉曼光谱仪的关键技术进展及国内外发展现状。介绍了海关现场查验中利用其轻巧、附件选择丰富、分析软件功能强,特别与具备高灵敏度的表面增强拉曼技术结合在危险化学品及两用物项和技术的监管、旅检和快件通道可疑物质的鉴别以及打击"芬太尼"类新精神活动物质的筛查等场景的应用情况,展望了其良好的应用前景。     

直下式LED黄疸灯的设计与制作

研制了一款可在接收面上实现平面光谱分布均匀的直下式LED黄疸灯。首先,按照LED数量从少到多的顺序,在同一基板上依次对4种单色LED进行排布,使其分别在同一出光面上形成大小相近且照度均匀的光斑,进而使出光面乃至接收面上实现平面光谱分布均匀。其次,对直下式LED黄疸灯仿真验证,结果表明其确实可在接收面上实现平面光谱分布均匀。最后,在出光面上分别放置扩散板和棱镜膜,对两款直下式LED黄疸灯样品进行实验测试。测试结果表明:相较而言,在出光面上放置增光膜的直下式LED黄疸灯样品可以使接收面具有较多的光能量。但无论出光面上放置的是棱镜膜还是扩散板,在600 mm×300 mm的接收面上,直下式LED黄疸灯都能实现99. 9%以上的平面光谱分布均匀度值以及74%以上的照度均匀度值,符合国家婴幼儿光疗设备安全标准。