Measurement of Spin Singlet-Triplet Qubit in Quantum Dots Using Superconducting Resonator

The spin qubit in quantum dots is one of the leading platforms for quantum computation.A crucial requirement for scalable quantum information processing is the high efficient measurement.Here we analyze the measurement process of a quantum-dot spin qubit coupled to a superconducting transmission line resonator.Especially,the phase shift of the resonator is sensitive to the spin states and the gate operations.The response of the resonator can be used to measure the spin qubit efficiently,which ca...     

兰州放射性核束流线 *

描述了兰州重离子加速器国家实验室最近建成并已投入运行的新装置———兰州放射性核束流线 (RIBLL) .RIBLL是PF型双消色差反对称结构放射性核束分析设备 ,它的立体角接收度≥ 6 .5msr,动量接受度± 5 % ,最大磁刚度4.2Tm ,元素分辨>150 ,质量分辨>300 ,最短分辨时间 <1μs.初级束流的入射角在 0°～ 5°范围可调 .RIBLL已为第一批物理实验提供¹⁷N ,⁸He等多种放射性核束流 .     

镜面偏心测量光学系统设计及其杂光分析

为了解决现有镜面偏心测量设备存在的问题,本文研究了一种采用切换镜头和调焦相结合的方法来设计的镜面偏心测量光学系统,使用这个光学系统,既能使被测镜面的曲率半径扩展到-∞~+∞范围,又能保证测量精度。通过Lighttools软件对这个光学系统进行光线追迹,分析其杂光分布,结果表明:准直镜头内部多次反射产生的杂光强度很低,可以忽略。而当被测镜头中存在相邻球心像距的镜面时,产生的杂光强度比较大,在后续的图像处理过程中,必须增强目标图像的对比度。利用研制的镜面偏心测量设备进行测量实验,结果进一步验证了杂光分析的正确性。     

非完整映射理论与刚体定点转动的几何描述

利用非完整映射方法,从一个已知Riemann空间构造一个嵌入其中的Riemann-Cartan空间.作为特例,研究从Euclidean空间构造Weitzenbock空间的方法.基于dAlembert-Lagrange原理和非完整映射,将一个Riemann空间的测地线对应于另一个Riemann-Cartan空间的自平行线.把这种非完整映射理论应用到刚体定点转动问题上,得到了刚体运动的欧拉方程是欧拉角描述的Riemann位形空间的测地线方程,而在刚体角速度对应的准坐标空间上是常挠率Riemann-Cartan空间的自平行线方程的结论. 关键词： 欧拉角 非完整映射 Riemann-Cartan空间 自平行线     

混沌时间序列的局域高阶Volterra滤波器多步预测模型

依据相空间邻近轨道演化相似性特点建立训练模式,提出了基于自适应高阶非线性Volterra滤波器（HONFIR）的混沌时间序列多步预测模型（MSP-HONFIR）;通过定义距离相似度、趋势相似度来衡量轨道演化相似度,提出了混沌吸引子邻近轨道判别的新方法;从模型训练充分性角度出发探讨了MSP-HONFIR滤波器模型训练集规模控制的依据.数值研究表明MSP-HONFIR滤波器模型的多步预测性能优于原有HONFIR滤波器模型. 关键词： 混沌 非线性自适应预测 Volterra滤波器模型 训练模式     

p-Laplace型非线性泛函差分方程正解的存在性

作者研究下述的p-Laplace型非线性泛函差分方程边值问题正解和多重正解的存在性,得到相应的充分条件,其中Φp(u)=|u|p-2u,P>1,(?)(0)= 0,C+={(?):(?)∈ C,(?)(k)≥0,k∈[-r,0])．     

The queueing model for quantum key distribution network

This paper develops a QKD (quantum key distribution)-based queueing model to investigate the data delay on QKD link and network, especially that based on trusted relays. It shows the mean packet delay performance of the QKD system. Furthermore, it proposes a key buffering policy which could effectively improve the delay performance in practice. The results will be helpful for quality of service in practical QKD systems.     

The research on suspended ZnO nanowire field-effect transistor

This paper reports that a novel type of suspended ZnO nanowire field-effect transistors (FETs) were successfully fabricated using a photolithography process, and their electrical properties were characterized by I--V measurements. Single-crystalline ZnO nanowires were synthesized by a hydrothermal method, they were used as a suspended ZnO nanowire channel of back-gate field-effect transistors (FET). The fabricated suspended nanowire FETs showed a p-channel depletion mode, exhibited high on--off current ratio of ～10⁵. When V_DS=2.5 V, the peak transconductances of the suspended FETs were 0.396 μS, the oxide capacitance was found to be 1.547 fF, the pinch-off voltage V_TH was about 0.6 V, the electron mobility was on average 50.17 cm²/Vs. The resistivity of the ZnO nanowire channel was estimated to be 0.96× 10²Ω cm at V_GS = 0 V. These characteristics revealed that the suspended nanowire FET fabricated by the photolithography process had excellent performance. Better contacts between the ZnO nanowire and metal electrodes could be improved through annealing and metal deposition using a focused ion beam.     

光子晶体光纤拉制中工艺参数的控制

分析了光子晶体光纤拉制中各工艺参数之间的相互影响,建立了工艺参数与最终光纤结构之间的对应关系.在温度和送料速度的协调控制下,通过调节气压参数可有效控制气孔结构.实验拉制出孔径孔距比分别为0.45和0.8的单模以及高占空比光子晶体光纤.在制备非均匀孔径光子晶体光纤时,仅靠调控工艺参数往往难以拉制出理想结构,本文以一种单偏振单模PCF结构为例,对预制棒结构进行了优化设计.计算表明可由此拉制出满足要求的光子晶体光纤. 关键词： 光子晶体光纤 工艺参数 气压控制 气孔结构