A geometric factor calculation method based on the isotropic flux assumption

One of the instruments onboard the China Seismic Electromagnetic Satellite （CSES） is the Low Energy Particle Detector （LEPD）. The primary objective of LEPD is to provide measurements of the fluxes, energy spectra and pitch angles of 100 keV to 10 MeV electrons and protons from 2 to 50 MeV in the Earth＇s magnetosphere. The geometric factor is one of the principle parameters of a detector, which converts the physical quantity-count rate to the particle quantity-flux. In this paper, we calculated the geometric factor of LEPD via computer modeling of an isotropic radiation environment. It was first demonstrated that the radiation intensity related should obey a cosine-law, then a general sampling method of generating this distribution via GPS of GEANT4 was explained. Furthermore, combined with flux normalization, a comparison of the geometric factor calculation of a set of 2-layer detectors with different shapes （cylinder, truncated cone and rectangle） was performed. Results show a generally good agreement between simulation and analytical calculations for the cylinder and truncated cone detectors, and the result of the rectangular one, for which there is no accurate analytical formula, is consistent with the previous simulated results by others. As a practical instance of the 2-layer rectangle detector, the geometric factor of LEPD is 10.336±0.036 m cm2·sr for 10 MeV proton and 8.211±0.032 m cm2·sr for 8 MeV electron.     

Design and performance study of the LEPD silicon tracker onboard the CSES satellite

The low energy particle detector (LEPD) is one of the main payloads onboard the China seismic electromagnetic satellite (CSES). The detector is designed to ascertain space electrons (0.1-10 MeV) and protons (2-50 MeV). It has the capability of identifying the electrons and protons, to measure the energy spectrum and the incident angle of the particles. The LEPD is made up of a silicon tracker system, a CsI (Tl) mini-calorimeter, an anti-coincidence system made by plastic scintillator, as well as electronics and a data acquisition system (DAQ). The tracker is also a kind of E-E telescope; it consists of two layers of double-sided silicon strip detectors (DSSD). The signals emerging from the silicon tracker can be read out by two pieces of application specific integrated circuit (ASIC), which also can generate an event trigger for the LEPD. The functions of the DSSD system in the LEPD for charged particles were tested by 241Am @5.486 MeV α particles. The results show that the DSSD system works well, and has high performance to detect charged particles and measure the position of incident particles.     

H3正三角形和H4正四面体结构的变分计算

采用改进排列通道量子力学(Modified Arrangement Channel Quantum Mechanics,简称MACQM)方法和变分法,计算了H₃体系正三角形和H₄体系的正四面体结构的能量曲线.当H₃体系原子核的间距R=1.74a₀,波函数变分参数α=1.03时,体系能量有最低值-1.58161 a.u.;当H₄体系原子核的间距R=1.60a₀,波函数变分参数α=1.07时,体系能量有最低值-2.28097 a.u.,这表明H₃体系的正三角形构型和H₄的正四面体结构是可以稳定存在的.     

Ta,Ta/Cu缓冲层对NiFe/Fe Mn双层膜交换偏置场的影响

采用磁控溅射方法制备了分别以Ta和Ta/Cu作为缓冲层的一系列NiFe/FeMn双层膜.实验发现,以Ta为缓冲层的NiFe/FeMn双层膜的交换偏置场比以Ta/Cu为缓冲层的NiFe/FeMn双层膜的交换偏置场大.测量了这两种双层膜的织构、表面粗糙度和表面成分.结果表明,以Ta/Cu为缓冲层时,Cu在NiFe层的上表面偏聚是造成NiFe/FeMn双层膜交换偏置场降低的重要原因. 关键词： NiFe/FeMn 交换偏置场 织构 表面粗糙度     

珠宝鉴定中的物理方法

珠宝鉴定中的物理方法周维兴，于壮玢（国内贸易部珠宝首饰质量监督检验中心）（天津商学院）改革开放以来，随着人民物质生活水平不断丰富，人们的消费趋向已经开始转向美化生活方面，如豪华的室内装修、高档的服装、考究的化妆与美容以及用珠宝首饰来点缀以显示自身的雍...     

Experimental and numerical investigation of a Hall thruster with a chamfered channel wall

A discharge channel with a chamfered wall not only has application in the design of modern Hall thrusters, but also exists where the channel wall is eroded, and so is a common status for these units. In this paper, the laws and mechanisms that govern the effect of the chamfered wall on the performance of a Hall thruster are investigated. By applying both experimental measurement and particle-in-cell simulation, it is determined that there is a moderate chamfer angle that can further improve the optimal performance obtained with a straight channel. This is because the chamfering of the wall near the channel exit can enhance ion acceleration and effectively reduce ion recombination on the wall, which is favorable to the promotion of the thrust and efficiency. However, the chamfer angle should not be too large; otherwise, both the density of the propellant gas and the distribution of the plasma potential in the channel are influenced, which is undesirable for efficient propellant utilization and beam concentration. Therefore, it is suggested that the chamfer shape of the channel wall is an important factor that must be carefully considered in the design of Hall thrusters.     

紫外激光和压力共同作用下C60-peapod的聚合相变研究

采用气相扩散方法将C₆₀分子填充到单壁碳纳米管(SWNTs)中，制备出高填充比率的豆荚形纳米材料C₆₀@SWNT，又称为peapod.用金刚石对顶砧(DAC)装置获得高压，在高压下同时利用紫外激光处理样品，通过激光和压力的共同作用研究了C₆₀分子在碳管内的聚合相变.在21.5GPa高压下，同时紫外激光(325nm)照射30min后，拉曼光谱表明C₆₀分子在碳管内发生了聚合，形成一维链状O相聚合结构，且该相变是不可逆的. 关键词： 60 peapod')" href="#">C₆₀ peapod 紫外激光 高压 拉曼光谱     

In-Situ High Pressure Raman Spectrum and Electrical Property of PbMoO4

In-situ high pressure Raman spectra and electrical conductivity measurements of scheelite-structure compound PbMoO4 are presented. The Raman spectrum of PbMoO4 is determined up to 26.5 GPa on a powdered sample in a diamond anvil cell （DAC） under nonhydrostatic conditions. The PbMoO4 gradully experiences the trans- formation from the crystal to amorphous between 9.2 and 12.5 GPa. The crystal to amorphous transition may be due to the mechanical deformation and the crystalographic transformation. Furthermore, the electrical conductivity of PbMoO4 is in situ measured accurately using a microcircuit fabricated on a DAC based on the van der Pauw method. The results show that the electrical conductivity of PbMoO4 increases with increases of pressure and temperature. At 26.5 GPa, the electrical conductivity value of PbMoO4 at 295K is 1.93 - 10-4 S/cm, while it raises by one order of magnitude at 430K and reached 3.33 - 10-3 S/cm. However, at 430K, compared with the electrical conductivity value of PbMoO4 at 26.5 GPa, it drops by about two order magnitude at 7.4 GPa and achieves 2.81 × 10^-5 S/cm. This indicates that the effect of pressure on the electrical conductivity of PbMoO4 is more obvious than that of temperature.     

A study on the electrical property of HgSe under high pressure

Using a microcircuit fabricated on a diamond anvil cell, we have measured in-situ conductivity of HgSe under high pressures, and investigated the temperature dependence of conductivity under several different pressures. The result shows that HgSe has a pressure-induced transition sequence from a semimetal to a semiconductor to a metal, similar to that in HgTe. Several discontinuous changes in conductivity are observed at around 1.5, 17, 29 and 49GPa, corresponding to the phase transitions from zinc-blende to cinnabar to rocksalt to orthorhombic to an unknown structure, respectively. In comparison with HgTe, it is speculated that the unknown structure may be a distorted CsCl structure. For the cinnabar-HgSe, the energy gap as a function of pressure is obtained according to the temperature dependence of conductivity. The plot of the temperature dependence of conductivity indicates that the unknown structure of HgSe has an electrical property of a conductor.     

Rayleigh-Taylor不稳定性弱非线性阶段界面效应对谐波的影响

为了更好地理解不同空间坐标系下流体界面对Rayleigh-Taylor（RT）不稳定性弱非线性阶段谐波的影响,文章采用3阶小扰动展开法,解析研究了球坐标空间经典RT不稳定性弱非线性阶段谐波的演化规律,并和柱坐标空间以及直角坐标空间相应结果进行了对比研究.当球坐标系和直角坐标系中RT不稳定性界面扰动波长相同,球坐标系中初始扰动半径为无穷大时（即球坐标下RT不稳定性初始扰动半径相对于扰动波长为无穷大时）,球坐标下RT不稳定性前4次谐波的结果和直角坐标系下的相应结果相同.研究表明:由初始界面曲率引起的Bell-Plesset（BP）效应和空间效应（直角坐标空间、柱坐标空间和球坐标空间）对谐波发展有较大的影响.即在不同正交曲线坐标系下,不同曲率的流体界面效应对RT不稳定性谐波发展有较大的影响.对于柱坐标空间和球坐标空间,2阶对0次谐波的反馈加强了界面向内收缩.研究还表明:界面效应增加了2次谐波的负反馈,然而,对于基模和3次谐波却有不同的影响.