Construction of a Novel 2D Polymer [Co（dmpzm）（dca）2]∞ from Reaction of a Mononuclear Complex [Co（dmpzm）Cl2] with Sodium Dicyanamide （dca） [dmpzm=bis（3,5-dimethylpyrazolyl）methane]

Reaction of COC12.6H20 with equimolar bis（3,5-dimethylpyrazolyl）methane （dmpzm） produced a mononuclear adduct [Co（dmpzm）Cl2] （1）. Treatment of 1 with sodium dicyanamide （dca） afforded a polymeric complex [Co（dmpzm）（μ-dca）2]∞ （2）. 1 and 2 were characterized by elemental analysis, IR spectra, thermogravimetric analysis and single-crystal X-ray diffraction. The cobalt atom in 1 adopts a distorted tetrahedral coordination geometry, bound to two N atoms of one dmpzm and two Cl atoms. Complex 2 has a 2D brick-wall network （extended along the bc plane） in which the { [Co（dmpzm）（μ-dca）]2} n^2n＋ chains are interconnected by pairs of μ-dca anions along the c axis. The magnetic properties of 1 and 2 were also investigated.     

新颖双核钐硫酚化合物[(THF)3I2Sm(m-SAr)]2 (Ar = Ph, 4-Me2NC6H4)的合成与化合物[(THF)3I2Sm(m-S-4-Me2NC6H4)]2的晶体结构

Reactions of SmI2 in THF with ArSSAr produced two binuclear samarium thiolate complexes [（THF）3I2- Sm（μ-SAr）]2 [Ar=Ph （1）, 4-Me2NC6H4 （2）] in high yields. The structure of 2 was characterized by single crystal X-ray crystallography. The crystal of 2 belongs to the triclinic system with space group P 1 and a=0.95705（13） nm, b= 1.22287（14） nm, c= 1.26450（14） nm, a=64.194（11）°, B=78.491（13）°, y=76.176（12）°, V= 1.2860（3） nm^3, Z= 1,μ=4.783 mm^-1, Dc= 1.964 Mg/m^3, M= 1521.19, S= 1.046, R1=0.0358, wR2=0.0910. X-ray analysis revealed that 2 is a thiolate-bridged dimer in which each Sm atom adopts a distorted pentagonal bipyramidal coordi- nation geometry.     

乙酰基硫代甲酰芳胺合成二氢吡嗪的研究

报道了一种合成乙酰基硫代甲酰芳胺的方法. 合成的乙酰基硫代甲酰芳胺与1,2-乙二胺缩合生成5-(4'-取代苯胺基)-6-甲基-2,3-二氢吡嗪类杂环化合物.     

电渗流与缓冲液浓度之间数学关系的线性表达

It was believed that electroosmotic mobility μeo is inversely proportional to the square root of the ionic strength L But the linear relationship for regression analysis was expressed differently in different papers. The paper studied the linear expression of the mathematical relationship between μeo and c （background buffer concentration） by mathematical transform and real experimental data.μeo values of fused silica capillary were determined in four buffer systems. Their experimental conditions were controlled carefully for decreasing temperature difference AT and pH difference ApH in 50 μm ID capillary, in which no double layer overlap existed. The linear relationship between the reciprocal of electroosmotic mobility and the square root of concentration （or ionic strength） was derived by mathematical method. The regression analysis of experimental data was shown to well correspond to the relationship. The constants in regression equation could be well defined and the calculated results were acceptable.     

铁氰化钾分光光度法测定药物中维生素B_1含量

在NaOH碱性介质中,维生素B1能将K3[Fe(CN)6]定量还原为K4[Fe(CN)6],根据Fe3+与K4[Fe(CN)6]反应生成可溶性普鲁士蓝的吸光度值,可间接测定出维生素B1的含量。在选定条件下,维生素B1在0.40~15.0mg·L-1范围内与吸光度(A)呈线性关系,相关系数R=0.9989,检出限为0.12mg·L-1,相对标准偏差(RSD)为1.75%(n=6)。表观摩尔吸光系数ε=4.3×104 L·mol-1·cm-1。该方法可用于药物中维生素B1含量的测定。     

外光电法测量普朗克常量的误差分析与修正

光电效应实验测量得到的普朗克常量与公认普朗克常量值之间存在较大误差,本文通过一系列实验和数据分析,证明了光电效应实验中截止电压对应的光波长并不是滤色片标称的波长,而是小于滤色片标称的波长,是与光电管灵敏度相关的某一起始波长,即起始波长标称不准是误差的主要因素,并设计了相应的改进方案.     

钼基体半径对金刚石膜残余热应力的影响

采用有限元方法分析了钼基体半径对金刚石膜残余应力的影响,得出了膜内径向应力、轴向应力、剪切应力分布的等值线图。结果表明:径向应力在膜内大部分区域为压应力,其最大值随着钼基体半径的增大而减小;轴向应力在金刚石膜的侧面边缘处出现了较大的拉应力,且其值随着半径的增大而增大,与此同时在侧面膜/基界面边缘处出现了明显的应力集中现象;剪切应力的最大值随着钼基体半径的增大而增大。此结论可以在金刚石膜制备过程中,对应力进行有效的控制提供一定的参考价值。     

多孔炭载聚钴酞菁修饰电极用于苯二酚的电催化及检测

以二氧化硅纳米球为模板,通过葡萄糖的水热聚合反应制备了具有三维结构的多孔炭(PC)。采用电化学聚合方法将单体钴酞菁聚合在多孔炭修饰的玻碳电极(PC/GC)表面,制备了多孔炭载聚钴酞菁的修饰电极(Co-TAPc/PC/GC)。通过循环伏安法(CV)研究了间苯二酚、邻苯二酚和对苯二酚在此修饰电极的电化学响应。结果表明,相对于裸玻碳电极、多孔炭或聚钴酞菁单独修饰的电极,该修饰电极对3种同分异构体的酚类物质均有更好的电催化活性。利用计时安培技术,该修饰电极对间苯二酚、邻苯二酚及对苯二酚分别在5.0×10-6～5.0×10-4 mol/L,6.0×10-6～2.5×10-4 mol/L和2.0×10-6～8.0×10-4 mol/L范围内具有较好的线性响应。此修饰电极具有制备简单、响应灵敏、稳定性好等优点。     

表面解吸常压化学电离质谱快速鉴别樟木制品

采用自行研制的表面解吸常压化学电离质谱(SDAPCI-MS),在无需样品预处理的情况下,对樟木制品及普通木材进行检测,在正离子模式及m/z 90～400范围内获得其化学指纹图谱,并通过主成分分析(PCA)方法对所获指纹谱图信息进行分析,进而对不同样品进行鉴别。结果表明,SDAPCI-MS能够对樟木表面多种特征化学成分(樟脑,香叶醇等)进行解吸电离,快速获得樟木的化学指纹谱图,并能够对目标组分做多级串联质谱鉴定。结合PCA方法,可对不同品质、不同种类的木材样品进行区分。结果表明,本方法灵敏度高,分析速度快(单个样品分析时间小于3 min),可望应用于珍贵木材快速无损分析及品质鉴定。