Laser-induced damage of 1064-nm narrow-band interference filters under different laser modes

The laser-induced damage behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running laser mode. The absorption measurement of such coatings has been performed by surface thermal lensing (STL) technique. The relationship between damage morphology and absorption under the two different laser modes was studied in detail. The explanation was given by the standing-wave distribution theory.     

周期性梯度折射率多层膜的软X射线反射率

由于界面互扩散的存在,实际的超薄多层膜很难具有清晰的界面结构.假设超薄多层膜为具有周期性梯度折射率的多层膜结构,用直线模型和余弦模型模拟了周期性梯度折射率多层膜的软X射线反射率.结果证明,折射率余弦渐变的多层膜虽然不具有清晰的界面,但它同样具有很高的反射率.     

Surface relief resonant Brewster filters with multiple channels

In this paper, a new type of resonant Brewster filters （RBF） with surface relief structure for the multiple channels is first presented by using the rigorous coupled-wave analysis and the S-matrix method. By tuning the depth of homogeneous layer which is under the surface relief structure, the multiple channels phenomenon is obtained. Long range, extremely low sidebands and multiple channels are found when the RBF with surface relief structure is illuminated with Transverse Magnetic incident polarization light near the Brewster angle calculated with the effective media theory of sub wavelength grating. Moreover, the wavelengths of RBF with surface relief structure can be easily shifted by changing the depth of homogeneous layer while its optical properties such as low sideband reflection and narrow band are not spoiled when the depth is changed. Furthermore, the variation of the grating thickness does not effectively change the resonant wavelength of RBF, but have a remarkable effect on its line width, which is very useful for designing such filters with different line widths at desired wavelength.     

An explanation for deviations from the quark number scaling of elliptic flows in low pT region

We carry out a systematic study of the different contributions to the deviations of the elliptic flows from the quark number scaling in high energy heavy ion collision in a quark combination model. The effects that we considered are: the resonance decay, the flavor dependence of the quark elliptic flow and the combination of quarks/antiquarks with slightly different transverse momenta. Our results show that the deviations observed in experiments can be well reproduced within the combination framework if all the three effects are considered. We make a detailed analysis of the different contributions using a Monte-Carlo program and suggest measuring the quark number scaling in intermediate p_T range more precisely.     

Harmonic beam splitter design and fabrication

Two problems of half-wave hole and high ripples in the transmittance region for a harmonic beam splitter had been pointed out and analyzed. Based on the application of a half-wavelength control and a new admittance matching methods, a harmonic beam splitter was designed and fabricated. The former method eliminated the half-wave hole fundamentally, and the latter smoothed high ripples in the transmittance region effectively. The matching stack consisted of a symmetrically periodic structure and provided a complete matching at the desired wavelength, i.e., both conditions for the equivalent admittance and phase thickness were fulfilled. Furthermore, both the theoretical and the tested curves had been given, and a good agreement between them was obtained.     

Effect of Alumina and Chromium Interlayers on Microstructures and Optical Properties of Thin Ag Films on Glass Substrates

Effects of alumina and chromium interlayers on the microstructure and optical properties of thin Ag films are investigated by using spectrophotometry, x-ray diffraction and AFM. The characteristics of Ag films in Ag/glass, Ag/l2O3/glass and Ag/Cr/glass stacks are analysed. The results indicate that the insertion of an Al2O3 or Cr layer decreases the grains and influences the reflectance of Ag films. The reflectance of the Ag film can be increased by controlling the thickness of alumina interlayer. The stability of Ag films is improved and the adhesion of Ag films on glass substrates is enhanced by alumina as an interlayer.     

Influences of SiO2 laser-induced protective layers and damage threshold of annealing on the Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition. The effects of SiO2 protective layers and annealing on the laser-induced damage threshold （LIDT） of the films are investigated. The results show that SiO2 protective layers exert little influence on the electric field intensity （EFI） distribution, microstructure and microdefect density but increase the absorption slightly. Annealing is effective on decreasing the microdefect density and the absorption of the films. Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT. Moreover, the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

半导体激光自混频干涉式传感器中的干涉与调制

应用F-P模型，阐述了半导体激光自混频干涉式传感器的干涉与调制过程，同时给出了相应的计算．     

Nd:YAG激光器光栅式扫描预处理的计算模拟与优化分析

 采用计算模拟的方法,研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现,脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用,因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。     

Influence of Different Substrates on Laser Induced Damage Thresholds at 1064nm of Ta2O5 Films

Ta2O5 films are prepared on Si, BK7, fused silica, antireflection （AR） and high reflector （HR） substrates by electron beam evaporation method, respectively. Both the optical property and laser induced damage thresholds （LIDTs） at 1064 nm of Ta2O5 films on different substrates are investigated before and after annealing at 673 K for 12 h. It is shown that annealing increases the refractive index and decreases the extinction index, and improves the O/Ta ratio of the Ta2O5 films from 2.42 to 2.50. Moreover, the results show that the LIDTs of the Ta2O5 films are mainly correlated with three parameters： substrate property, substoichiometry defect in the films and impurity defect at the interface between the substrate and the films. Details of the laser induced damage models in different cases are discussed.