超临界CO2直旋混合射流破岩特性的实验研究

超临界二氧化碳(CO₂)射流破岩既能降低岩石门限压力又能有效保护储层,直旋混合射流兼具直射流和旋转射流特点可提高破岩效率,基于此提出了超临界CO₂直旋混合射流的破岩方法。为了揭示超临界CO₂直旋混合射流破岩特性,设计加工出叶轮式直旋混合射流喷嘴,通过岩石定点冲击破碎实验对比了该射流与常规水射流的破岩效果,并研究了叶轮长度、叶轮中心孔直径、混合腔长度、喷射距离、射流压力等重要参数对超临界CO₂直旋混合射流破岩效果的影响。结果表明:相同实验条件下,该射流方法的平均破岩能力比常规水射流提高了42.9%;超临界CO₂直旋混合射流破岩易出现较大体积岩屑崩落现象;随着叶轮长度、混合腔长度、喷射距离的增大破岩效果均先增强后减弱,实验条件下上述参数存在最优范围值;叶轮中心孔直径的增大会导致岩石破碎孔深度增加、直径减小;随着射流压力的升高,超临界CO₂直旋混合射流破岩效果有着较为明显的提升。研究结果可为超临界CO₂直旋混合射流破岩方法的进一步研究提供实验依据。     

压力机下死点定位精度的检测及评价方法研究

设计一种粗-细二级调节相结合的装置来动态地测量压力机的下死点, 可以方便准确地测量不同工作冲程时的下死点位置. 针对所测数据, 结合模糊判断法和层次分析法构造压力机下死点精度的综合评价指标, 来对压力机下死点定位精度进行分析与评价. 评价步骤通过选择评价因素和构建评价集, 确定比较矩阵并计算各影响因素权重, 以确立模糊评价矩阵, 并通过综合评价模型判断下死点精度等级. 结果表明, 该评价方法可有效地评价压力机的定位精度.     

Nonlinear modes in rotating double well potential with parity–time symmetry

We investigate the nonlinear modes in a rotating double well potential with 79T symmetry. Focus on the existence and stability of the nonlinear PT modes in this system, we found that five types of PT modes can stably exist by given certain parameter settings. The multistable area between these modes are studied numerically and the bistable and tristable areas are delimited. With different input trial wavefunctions, five types of solitary wave modes are identified. We found that the rotating of the potential can significantly affect the power flow of the fundamental harmonic mode, whose effect is absent for the other modes.     

超声波震荡法及润湿性增强法对单晶硅阶梯光栅闪耀面粗糙度的影响

单晶硅阶梯光栅闪耀面表面粗糙度会引起入射光的散射形成杂散光,为获得低杂散光的阶梯光栅槽形,减小单晶硅阶梯光栅闪耀面表面粗糙度显得尤为重要。在单晶硅湿法刻蚀工艺中,阶梯光栅闪耀面表面粗糙度较大的原因是反应生成的氢气易在硅片表面停留,形成虚掩模,阻碍反应的进一步进行。基于超声波空化作用及异丙醇(IPA)增加单晶硅表面润湿性的原理,在单晶硅湿法刻蚀制作阶梯光栅工艺过程中分别利用超声波震荡法及润湿性增强法对所制阶梯光栅闪耀面表面粗糙度进行改善。利用超声波震荡法所制阶梯光栅闪耀面表面粗糙度小于15nm,利用润湿性增强法所制阶梯光栅闪耀面表面粗糙度小于7nm。同时施以超声波震荡法和润湿性增强法,在异丙醇质量分数范围为5%~20%,超声波频率为100kHz,功率范围为30~50 W时,所制阶梯光栅闪耀面表面粗糙度小于2nm,而且当异丙醇质量分数为20%、超声波频率为100kHz以及超声波功率为50W时,所制中阶梯光栅闪耀面表面粗糙度达到1nm。实验结果表明,同时施以超声波震荡法及润湿性增强法,并优化实验参数可以制备更低粗糙度的阶梯光栅。     

Non-Rayleigh photon statistics of superbunching pseudothermal light

Superbunching pseudothermal light has important applications in studying the second-and higher-order interference of light in quantum optics.Unlike the photon statistics of thermal or pseudothermal light is well understood,the photon statistics of superbunching pseudothermal light has not been studied yet.In this paper,we will employ single-photon detectors to measure the photon statistics of superbunching pseudothermal light and calculate the degree of second-order coherence.It is found that the larger the value of the degree of second-order coherence of superbunching pseudothermal light is,the more the measured photon distribution deviates from the one of thermal or pseudothermal light in the tail part.The results are helpful to understand the physics of two-photon superbunching with classical light.It is suggested that superbunching pseudothermal light can be employed to generate non-Rayleigh temporal speckles.     

Temperature dependence of spin pumping in YIG/NiOx/W multilayer

We report the temperature dependence of the spin pumping effect for Y₃Fe₅O₁₂ (YIG, 0.9 μm)/NiO (t_NiO)/W (6 nm) (t_NiO = 0 nm, 1 nm, 2 nm, and 10 nm) heterostructures. All samples exhibit a strong temperature-dependent inverse spin Hall effect (ISHE) signal I_c and sensitivity to the NiO layer thickness. We observe a dramatic decrease of I_c with inserting thin NiO layer between YIG and W layers indicating that the inserting of NiO layer significantly suppresses the spin transport from YIG to W. In contrast to the noticeable enhancement in YIG/NiO (t_NiO ≈ 1-2 nm)/Pt, the suppression of spin transport may be closely related to the specific interface-dependent spin scattering, spin memory loss, and spin conductance at the NiO/W interface. Besides, the I_c of YIG/NiO/W exhibits a maximum near the T_N of the AF NiO layer because the spins are transported dominantly by incoherent thermal magnons.     

基于微流体装置的微血管网内红细胞流动和分布特性的研究简

实体肿瘤血管具有扩张、扭曲、不规则分支以及分支间连接絮乱等特征. 为了考察这些特征对血液流动的影响,将肿瘤血管简化为垂直相互贯通的微血管网,借助微流体实验装置,以一定浓度的红细胞悬液作为流动介质,研究红细胞在微血管网中的流动和分布特性. 具体实验方案如下：首先,采用软刻蚀技术,在聚二甲基硅氧烷（polydimethylsiloxane, PDMS）上加工出微血管网;然后,采用微注射泵控制微血管网入口处的红细胞悬液流量,使用倒置显微镜和高速摄影系统观察并记录实验过程;最后,通过Matlab 软件包Piv-lab 及高速摄影配套软件对获得的视频图像进行处理,提取红细胞在微血管网中的流动和分布数据. 数据处理结果显示,红细胞在微血管网中的流动和分布特性受悬液内的红细胞压积（hematocit, Hct）的影响. 红细胞随悬液Hct 的不同呈现2 种运动轨迹：一种为仅沿着轴向微管道流动;另一种是从轴向微管道流入并穿过径向微管道,再进入另一侧的轴向微管道. 另外,入口流量相同时,红细胞在微血管网中的流动速度随Hct 变化呈现不同,Hct 为3% 和5% 的红细胞速度要明显高于Hct 为1% 的红细胞速度.     

An amperometric biosensor based on covalent immobilization of ascorbate oxidase on biocompatiable and low-toxic poly(thiophene-3-acetic acid) matrix

The biocompatiable and low-toxic poly（thiophene-3-acetic acid）（PTAA） matrix was successfully electrosynthesized in ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate（BmimPF₆） in comparison with the electrosynthesis of PTAA matrix in acetonitrile（ACN）.Ascorbate oxidase（AO） was used as a model for the development and application of biosensor.Vitamin C（VC） biosensors were facilely fabricated by the covalent immobilization of AO molecules on PTAA matrices electrosynthesized in ACN containing tetrabutylammonium tetrafluoroborate and BmimPF₆, respectively.Electrochemical impedance spectroscopy,scanning electron microscopy and FTIR spectroscopy indicated that AO molecules were covalently immobilized on PTAA matrices.Parameters of the as-obtained biosensors such as working potential,pH and temperature have been optimized.The amperometric biosensor based on PTAA matrix electrosynthesized in BmimPF₆ exhibited wider linear range,lower detection limit,higher sensitivity and bioaffinity,and better operational and storage stability than that electrosynthesized in ACN under optimal conditions.The as-obtained biosensor based on PTAA matrix electrosynthesized in BmimPF₆ was employed for the detection of VC content in commercial juices,and the result was close to the data given by manufacturers.Excellent results indicate that the PTAA matrix electrosynthesized in ionic liquid is a promising platform for the covalent immobilization of biologically-active species and the development of biosensors.     

三七中Cu、Pb和Cd含量的不确定度评定

采用电感耦合等离子体-原子发射光谱法测定三七中Cu、Pb和Cd,对影响测定结果的不确定度来源进行了分析,在此基础上评定了分析结果的不确定度。研究表明,样品的重复性和校准曲线的拟合是影响不确定度的主要原因。     

电感耦合等离子体-质谱法测定工业硅中的痕量硼和磷

建立电感耦合等离子体-质谱法(ICP-MS)测定工业硅中痕量B和P的分析方法.采用HF-HNO3混合酸处理样品,对仪器工作参数进行优化,以Rh为校正内标,有效克服了基体效应及多元素分子离子干扰.分析结果表明,方法的检出限为:B为2.0μg·L-1、P为8.5μg · L-1,B和P的加标回收率分别为:97.2％-103.6％、95.2 ％-102.8％,精密度分别为2.6％、3.5％.方法可准确、快速测定工业硅中痕量元素B和P.