丹酚酸B的热稳定性及其热分解动力学研究

用TG-DTG 方法研究了丹参的有效成分丹酚酸B 的热降解过程. 热重分析结果表明该物质的失重过程分两步进行. 笫一步为脱去吸附水, 其温度范围为305～373 K, 第二步为丹酚酸B 分子骨架大规模降解, 其温度范围在413～864 K. 用Friedman 和Ozawa-Flynn-Wall 两种方法分别计算出该药物降解过程中的三个阶段的活化能, 采用多步线性回归方法, 并参考常用的15 种热解机理函数, 确定了丹酚酸B 热降解过程最佳动力学模型为Fn-F2-F1.     

硫酸氢钾(KHSO4,A. R. )的低温热容和热化学性质

The heat capacities of KHSO₄ crystal (A.R.) have been measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 373 K.The experimental results have shown that there is no phase transition or thermal anomaly in this temperature region for the present crystal.The experimental heat-capacity data have been fitted to a smoothed curve with the aid of the least square method.In addition, the process of the thermal decomposition has been studied by TG analysis.     

Mg1.75Al0.25Ni1-xCrx (0≤x≤0.2)合金的制备及其性能

用扩散烧结法制备了Mg1.75Al0.25Ni1-xCr（0≤x≤0．2）系列合金,XRD结构分析表明,用Cr部分替代Mg1.75Al0.25Ni中的Ni,合金的晶体结构并不发生改变,主相为具有立方Ti2Ni结构的Mg3AlNi2相,只是其晶格常数α变大,Cr的替代提高了合金的放电容量,经过一个充放电循环后达到最大值。当x为0．1时,有利于提高合金电极的循环稳定性。测试4种合金阳极极化曲线发现,其腐蚀电位由正到负的顺序为Mg1.75Al0.25Ni0.9Cr0.1〉Mg1.75Al0.25Ni〉Mg1.75Al0.25Ni0.8Cr0.2〉Mg2Ni,说明Mg1.75Al0.25Ni0.9Cr0.1合金具有相对较好的抗腐蚀性．该系列合金循环稳定性结果也支持这一结论．用球磨方法改变合金性能,发现合金的相组成和相结构在球磨后均发生了变化,合金不再需要活化过程,但其放电容量并没有得到提高。     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

烟酸的低温热容和标准摩尔生成焓

利用精密自动绝热热量计测量了分析纯烟酸在78～400 K温区的低温热容. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到了热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温区每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 利用精密静止氧弹燃烧热量计测定了烟酸在298.15 K时的恒体积燃烧能为 Δ_cU＝ －(24528.3±16.1) J•g^－1. 依据物质燃烧焓定义计算出烟酸的标准摩尔燃烧焓为: Δ_cH_m^o＝－(3019.05±1.98) kJ•mol^－1. 最后, 依据Hess定律计算出烟酸的标准摩尔生成焓为: Δ_fH_m^o＝－(56.76±2.13) kJ•mol^－1.     

Low-temperature heat capacities and standard molar enthalpy of formation of pyridine-2,6-dicarboxylic acid

This paper reports that the low-temperature heat capacities of pyridine-2,6-dicarboxylic acid were measured by a precision automatic calorimeter over a temperature range from 78~K to 380~K. A polynomial equation of heat capacities as a function of temperature was fitted by the least-squares method. Based on the fitted polynomial, the smoothed heat capacities and thermodynamic functions of the compound relative to the standard reference temperature 298.15~K were calculated and tabulated at intervals of 5~K. The constant-volume energy of combustion of the compound was determined by means of a precision rotating-bomb combustion calorimeter. The standard molar enthalpy of combustion of the compound was derived from the constant-volume energy of combustion. The standard molar enthalpy of formation of the compound was calculated from a combination of the datum of the standard molar enthalpy of combustion of the compound with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

硼砂水溶液的低温热容及热化学性质研究

利用精密绝热量热仪测定了0.03355mol·kg-1的硼砂水溶液在78～351K温区的热容,从实验热容测定结果得到了该水溶液的凝固点为272.905K。用最小二乘法将实验热容值对温度进行拟合,建立了该溶液的热容随温度变化的多项式方程。根据热力学函数关系式,用此多项式方程进行数值积分,获得了以298.15K为基准的该溶液在80～350K温区每隔5K的热力学函数值,并计算出摩尔熔化焓和熔化熵分别为4.536kJ·mol-1和16.22J·K-1·mol-1。根据溶液凝固点降低值,计算出了该溶液的活度为0.99763。     

苯氧威 (C17H19NO4) 的热容和热力学性质

通过小样品精密自动绝热量热计测定了自己合成并提纯的苯氧威 (C₁₇H₁₉NO₄) 在79 ～ 360 K温区的低温摩尔热容。量热实验发现, 该化合物在320 ~ 330 K温区, 有一固 - 液熔化相变过程, 其熔化温度为（326.31±0.14）K, 摩尔熔化焓、摩尔熔化熵及化合物的纯度分别为：(26.98±0.04) kJ• mol^-1和（82.69 0.09）J•mol^-1•K^-1和 (99.53±0.01 )%。并计算出了80-360 K的热力学参数。用分步熔化法得到绝对纯化和物的熔点为326.60±0.06 K。用差示扫描量热 (DSC) 技术对该物质的固-液熔化过程作了进一步研究，结果与绝热量热法一致。     

2-氯-N,N-二甲基尼古丁酰胺的热容和热力学性质研究

Low-temperature heat capacities of 2-chloro-N,N-dimethylnicotinamide were precisely measured with a high-precision automated adiabatic calorimeter over the temperature range from 82 K to 380 K. The compound was observed to melt at （342.15±0.04） K. The molar enthalpy AfusionHm, and entropy of fusion, △fusionSm, as well as the chemical purity of the compound were determined to be （21387±7） J·mol^-1, （62.51±0.01） J·mol^-1·K^-1, （0.9946±0.0005） mass fraction, respectively. The extrapolated melting temperature for the pure compound obtained from fractional melting experiments was （342.25±0.024） K. The thermodynamic function data relative to the reference temperature 298.15 K were calculated based on the heat capacity measurements in the temperature range from 82 to 325 K. The thermal behavior of the compound was also investigated by different scanning calorimetry.