三维多孔吸液芯毛细特性孔隙尺度格子Boltzmann模拟

通过改进后的QSGS方法构造了三维复杂多孔吸液芯结构,采用格子Boltzmann方法和GPU并行算法,数值模拟了孔隙尺度下多孔吸液芯毛细抽吸两相传输动态特性,并探讨了表面润湿性和孔隙率对两相界面分布和毛细性能的影响.研究结果表明,对于三维复杂结构多孔吸液芯,毛细抽吸过程中两相界面不规则性、分布不均匀性程度较大,孔尺度效...     

具有规则表面织构的超高分子量聚乙烯髋臼表面温度分析

就人工关节中广泛使用的超高分子量聚乙烯(UHMWPE)髋臼在运行中的瞬态表面温度场进行了理论计算,与理想光滑表面对比考察了微球表面织构对接触压力分布的影响及其引起的表面温度变化.结果表明,基于光滑表面计算得到的髋臼表面温度偏低,而基于规则织构表面计算得到的温度与文献值接近;髋臼表面温度随摩擦系数和载荷增加而升高,随关节摆动而呈现周期性变化.     

初始啁啾对飞秒脉冲在光子晶体光纤中超连续谱产生的影响

采用分步傅里叶方法模拟了初始啁啾对光子晶体光纤中超连续谱产生的影响.根据光纤长度，将光子晶体光纤中脉冲的演化分成初始展宽、剧烈展宽和饱和展宽三个阶段.通过讨论啁啾脉冲和无初始啁啾脉冲在各阶段演化的区别，发现啁啾只在初始展宽和剧烈展宽阶段对光谱有影响，当β₂C<0时啁啾有利于光谱的展宽，当β₂C>0时则刚好相反，在饱和展宽阶段啁啾不再对光谱产生影响.要想利用啁啾脉冲来获得较宽的光谱，必须选择合适的光纤长度，使输出的脉冲处于剧烈展宽阶段.这为利用啁啾脉冲在光子晶体光 关键词： 超连续谱 光子晶体光纤 分步傅里叶法 啁啾     

南海IODP 349航次U1434站位海相红层成因——来自漫反射光谱与X荧光光谱的制约

提出IODP349航次首次在南海发现的大洋红层,与ODP124 航次苏禄海、苏拉威西海大洋红层以及三水盆地陆相红层相似,都具有直接覆盖于大规模岩浆岩之上的特征,对于揭示红层与岩浆热事件的关系具有重要意义。自上而下采集U1434站位灰绿色-红棕色海相沉积序列进行测试分析,并设计实验模拟沉积-成岩过程中氧逸度和地热温度对红层色素形成的控制作用,通过红色与非红色沉积、实测与实验样品的对比分析,探讨红层成因机制及其地质意义。采用漫反射光谱、荧光光谱分析以及二价铁滴定测试,量化分析了海相沉积与实验样品的颜色红度值、针铁矿、赤铁矿与不同价位铁元素的含量,得到以下新认识：U1434站位红色-非红色海相沉积均形成于较高的氧逸度条件,水体氧化还原环境的差异并不是控制红色与非红色沉积的主要因素;U1434站位大洋红层直接覆盖大洋玄武岩,起源于沉积-成岩阶段的高地温作用;陆相红层和白垩纪海相红层均分布于相应时期的构造-岩浆活动带,暗示了红层对地质热事件具有重要的指示意义。     

The 10 kW Level High Brightness Face-Pumped Slab Nd:YAG Amplifier with a Hybrid Cooling System

We demonstrate a high power, high brightness, slab amplifier based on face-pumped Nd:YAG slab gain modules,having a high efficient hybrid cooling system of the conduction cooling and forced convection cooling. Using a single gain module, a laser output power up to 4.5 kW with a remarkable optical-optical conversion efficiency of 51% is realized, indicating an excellent lasing performance of the Nd:YAG slab module. The amplifier operates at a repetition rate of 700 Hz and delivers a maximum average output power exceeding 10.5 kW with pulse duration of 150us. A good beam quality factor is measured to be β = 1.9. To the best of our knowledge, this is the highest brightness for a 10 kW level Nd:YAG slab amplifier.     

Disappearance of Superconductivity and a Concomitant Lifshitz Transition in Heavily Overdoped Bi_2Sr_2CuO_6 Superconductor Revealed by Angle-Resolved Photoemission Spectroscopy

By partially doping Pb to effectively suppress the superstructure in single-layered cuprate Bi_2Sr_2CuO_(6+δ)(Pb-Bi2201) and annealing them in vacuum or in high pressure oxygen atmosphere, a series of high quality Pb-Bi2201 single crystals are obtained with T_c covering from 17 K to non-superconducting in the overdoped region. High resolution angle resolved photoemission spectroscopy measurements are carried out on these samples to investigate the evolution of the Fermi surface topology with doping in the normal state. Clear and complete Fermi surfaces are observed and quantitatively analyzed in all of these overdoped Pb-Bi2201 samples. A Lifshitz transition from holelike Fermi surface to electron-like Fermi surface with increasing doping is observed at a doping level of ~0.35. This transition coincides with the change that the sample undergoes superconducting-to-non-superconducting states.Our results reveal the emergence of an electron-like Fermi surface and the existence of a Lifshitz transition in heavily overdoped Bi2201 samples. This provides important information in understanding the connection between the disappearance of superconductivity and the Lifshitz transition in the overdoped region.     

应用HPLC双波长指纹图谱及偏最小二乘法-判别分析评价抗癌平丸质量

采用双波长融合法建立2个厂家的18批抗癌平丸样品的HPLC指纹图谱,利用中药色谱指纹图谱相似度评价系统(A版)建立融合指纹图谱共有模式并进行相似度计算。确定了21个共有峰,相似度计算结果在0.601～0.788,说明2个厂家样品之间有一定的差异。通过对照品指认出原儿茶酸、香草酸、异嗪皮啶、巴马汀、野黄芩苷、迷迭香酸、木犀草素、芹菜素这8种成分。用SIMCA-P 11.5软件建立偏最小二乘法-判别分析(PLS-DA)模型进行统计分析,2个厂家的样品明显区分开,并且确定了导致厂家间质量差异的关键成分。结果表明,本文所建立的HPLC双波长指纹图谱技术结合PLS-DA能很好地区分不同厂家样品,克服了单波长检测时信息量有限的缺点。     

斜圈弹簧力学性能的有限元分析

斜圈弹簧在医疗器械、高压开关、汽车工业等领域应用广泛. 但其结构特殊, 受力复杂, 目前尚无有效的理论计算方法得出其载荷位移曲线, 只能通过数值仿真的方法研究其力学性能. 利用有限元软件ANSYS参数化建立环形斜圈弹簧有限元模型, 通过对模型的分析求解, 得出了其主要参数线径、节距、倾斜角与斜圈弹簧力学性能之间的关系. 研究了斜圈弹簧工作状态下的受力变形情况, 计算分析结果为斜圈弹簧的优化设计和合理应用提供了理论依据.     

高功率准连续波腔内和频全固态黄光激光器

报道了高功率准连续波腔内和频全固态黄光激光器的研究结果.为获得高功率的黄光输出,首先,激光器采用准连续方式运转,在保持抽运水平的条件下降低热效应,从而提高光束质量和光光转换效率;第二,采用热近非稳腔腔型设计,双棒串接补偿热致双折射技术,获得大基模体积高光束质量的基频光;第三,通过优化腔型,采用L型共折叠臂平-凹对称腔,使两束基频光达到空间重合且满足功率配比.通过这些方法,得到了输出功率7.6W,重复频率1.1kHz的准连续波黄光输出.据我们所知,这是目前腔内和频方案所获得的最高功率全固态黄光输出. 关键词： 黄光激光 腔内和频 Nd：YAG激光 全固态激光器     

Sixth harmonic generation of 1064-nm laser in KBBF prism coupling devices under two kinds of gas conditions

The conversion efficiency on the sixth harmonic of 1064 nm in KBe2BO3F2 （KBBF） at different gas pressures in two kinds of gases, helium and nitrogen, is measured and compared. In the both gases, maximum conversion efficiency on the sixth harmonic of 1064 nm in high vacuum is nearly 10% of 355 nm, which is almost four times higher than that in low vacuum. The maximum average output power at 177.3 nm is 670 ttW with the repetition rate of 10 Hz and the duration of 20 ps in high vacuum. It indicates that the sixth harmonic generation in high vacuum is more preferable than that in low vacuum.