保护介质对爆轰固相产物生成的影响

 通过爆轰合成超细金刚石实验，对装药在不同环境下引爆后得到的固相碳产物进行比较分析，研究不同介质如氮气、水、冰、遇热分解的盐等对爆轰产物中固相碳形成的影响，同时提出用石墨化程度来比较这种影响。结果显示，介质对爆轰产物中固相碳的石墨化和超细金刚石的保护有着重要的作用。几种介质中水的保护效果较好。     

海平面宇宙射线重粒子的质量谱及通量的测量

本文介绍了一个由飞行时间测量系统构成的实验装置,描述了这个实验装置的各个组成部分和它的性能,并给出了海平面宇宙射线重粒子的质量谱及通量的测量结果。     

非简并双光子Jaynes-Cummings模型腔场谱中的量子干涉

研究了两模二项式光场与二能级原子在高Q腔中发生双光子相互作用过程的腔场谱,给出了弱初始场条件下腔场谱的数值计算结果,讨论了两模腔场谱间的量子干涉.结果表明:两模腔场谱间的量子干涉随着频差的增大而呈现出周期性的衰减振荡,其振荡周期约为0·16g(g为原子与光场的相互作用强度系数),频差大于1·6g时干涉效应已经很弱.量子干涉还与初始场强度有关,随着初始场最大光子数的增加,量子干涉效应逐渐增强,但当光子数大于4时,干涉效应迅速减弱,当最大光子数大于6时,量子干涉现象几乎消失.     

量子密钥分发中Cascade协议的一种改进方案

密钥协商是量子密钥分发(QKD)中的重要组成部分.Cascade协议是实际中使用最广泛的量子密钥协商协议.本文基于[6]的工作提出一种对Cascade协议的改进方案.计算机仿真显示我们的方案比原始Cascade和一些其它改进方案有更高的效率.     

Design study of an FEL oscillator with a waveguide

We present a design study of a free electron laser （FEL） oscillator for high power THz source experiments on the basis of the Shanghai femtosecond accelerator device. A circular groove guide is used as a new interaction structure. Plane metal meshes are used as upstream and downstream mirrors of the resonator. The general design parameters are presented. We analyzed the spontaneous emission and stimulated emission in the oscillator using these parameters.     

High Power THz Undulator Radiation from Linear Accelerator

A 30-MeV femto-second electron linac is built at the Shanghai Institute of Applied Physics, which can produce high power, coherent THz undulator radiation. We report the experimental facility and measurement of the power, frequency spectrum. First experiments show the averaged power at THz to be about 20mW.     

气相色谱-串联质谱技术在环境监测中的应用进展

气相色谱–串联质谱(GC–MS/MS)因其强抗干扰能力和高灵敏度的特性,在环境监测领域得到广泛应用。综述了近年来GC–MS/MS技术在环境监测中关于空气、水、土壤及沉积物中污染物检测工作中的应用,并对该方法的性能进行了评价;根据环境监测的特点和需求,对GC–MS/MS技术在环境检测中的应用进行了展望。     

Design and simulation of the wire scanner for the injector linac of BEPCⅡ

BEPCⅡ, the upgrade project of Beijing Electron Positron Collider (BEPC), is an accelerator with large beam current and high luminosity, so an efficient and stable injector is required. Several beam diagnostic and monitoring instruments are used. A new diagnostic instrument — wire scanner, has been designed and will be used to measure the profile of the linac beam of BEPCⅡ. This paper describes the prototype of this system and the cause of heat generating of the wire. Some simulation results of the heat and force by using finite element method software—ANSYS^®,2) are presented and discussed.