钒-棓酸配合物吸附波

在含有0.1mol/L氟化铵、6.0×10~(-5)mol/L棓酸的Britton-Robinson缓冲液溶(pH6.1)中,钒在单扫示波极谱仪上产生一灵敏的配合物吸附波。峰电位在-0.66V(vs.SCE)左右。二次导数波高与钒浓度在0.001—0.30μg/ml范围内呈线性关系。方法已应用于煤飞灰中痕量钒的测定。     

云层背景目标识别的匹配滤波器设计

提出一种利用最大平均相关高度(MACH)算法识别复杂云层背景目标的改进滤波器设计方法。在MACH滤波器设计中,通过对云层背景功率谱的统计特性分析,数据拟合得到云层背景功率谱的分布函数,用以代替传统的白噪声模型;提取飞行目标的姿态变化图像,并作阈值化处理,得到训练样本。对不同云层背景和姿态变化目标的相关识别结果表明:改进滤波器的平均峰值相关能量比为0.71%,峰值鉴别率为0.92,可以有效抑制云层背景的干扰,对姿态变化目标识别的鲁棒性较好。     

Propagation modeling of ocean-scattered low-elevation GPS signals for maritime tropospheric duct inversion

The maritime tropospheric duct is a low-altitude anomalous refractivity structure over the ocean surface,and it can significantly affect the performance of many shore-based/shipboard radar and communication systems.We propose the idea that maritime tropospheric ducts can be retrieved from ocean forward-scattered low-elevation global positioning system(GPS) signals.Retrieval is accomplished by matching the measured power patterns of the signals to those predicted by the forward propagation model as a function of the modified refractivity profile.On the basis of a parabolic equation method and bistatic radar equation,we develop such a forward model for computing the trapped propagation characteristics of an ocean forward-scattered GPS signal within a tropospheric duct.A new GPS scattering initial field is defined for this model to start the propagation modeling.A preliminary test on the performance of this model is conducted using measured data obtained from a 2009-experiment in the South China Sea.Results demonstrate that this model can predict GPS propagation characteristics within maritime tropospheric ducts and serve as a forward model for duct inversion.     

Effect of high-temperature annealing on AlN thin film grown by metalorganic chemical vapor deposition

The effect of high-temperature annealing on AlN thin film grown by metalorganic chemical vapor deposition was investigated using atomic force microscopy, Raman spectroscopy, and deep ultra-violet photoluminescence(PL) with the excitation wavelength as short as ～ 177 nm. Annealing experiments were carried out in either N2 or vacuum atmosphere with the annealing temperature ranging from 1200℃ to 1600℃. It is found that surface roughness reduced and compressive strain increased with the annealing temperature increasing in both annealing atmospheres. As to optical properties,a band-edge emission peak at 6.036 eV and a very broad emission band peaking at about 4.7 eV were observed in the photoluminescence spectrum of the as-grown sample. After annealing, the intensity of the band-edge emission peak varied with the annealing temperature and atmosphere. It is also found that a much stronger emission band ranging from 2.5 eV to 4.2 eV is superimposed on the original spectra by annealing in either N2 or vacuum atmosphere. We attribute these deep-level emission peaks to the VAL–ONcomplex in the AlN material.     

P(DMAA-co-AM)水凝胶制备及其固定α-淀粉酶研究

采用氧化还原引发体系,水溶液聚合法制备P(DMAA-co-AM)水凝胶,并以其作为载体固定α-淀粉酶。采用单一变量法研究交联剂(N,N’-亚甲基双丙烯酰胺)用量、引发剂(过硫酸铵)用量、单体浓度和单体配比对凝胶性能的影响。以水凝胶的最大平衡溶胀度为指标,得出制备P(DMAA-co-AM)水凝胶的优化条件:交联剂用量为0.3%,引发剂用量为0.6%,单体浓度为20%,N,N′-二甲基丙烯酰胺与丙烯酰胺的摩尔比为2∶1。在优化条件下,采用原位聚合法固定α-淀粉酶,测定不同单体配比的P(DMAA-co-AM)水凝胶固定化α-淀粉酶的活性。     

虾青素简介

虾青素是一种极具发展潜力的抗氧化剂和色素,在医药、食品、水产养殖等方面具有广泛的应用。对虾青素的结构、性质、生理功能、应用、生产方法及发展前景等进行了简要介绍。     

基于51单片机的边界扫描控制器的设计与实现

为提高现代军事装备的故障检测能力,运用VC++软件编辑控制界面,设计并制作了一种基于51系列单片机的边界扫描控制器;该控制器由USB转串口电路和单片机构成,结构简单、通用性强且成本低廉;将PC机发送的测试指令或数据进行USB与JTAG协议转换,产生符合IEEE1149.1标准的JTAG总线信号;以EPM7128芯片为测试对象,注入JTAG信号并采集测试响应,实现了对基于测试芯片硬件电路的故障检测;测试结果表明:设计的边界扫描控制器可实现对单芯片和芯片级联的边界扫描状态的控制,能避开可编程芯片的内部逻辑程序控制,完成对可编程芯片及其外围电路的故障检测。     

基于微裂纹界面摩擦生热的点火模型

开展了基于微裂纹界面摩擦生热的细观点火模型研究,采用有限元方法对包含化学反应放热和摩擦生热的热传递方程进行了离散求解,计算模型中考虑了炸药颗粒熔化对升温过程的影响。着重分析了点火模型中主要参数(热点尺度、应变率和界面压力)对炸药点火的影响规律。数值研究表明,随着热点尺度的增大,热点的温度上升越快,越容易发生点火;应变率越大或者界面压力越高,热量积累越快,炸药越容易点火。

     

基于四极杆-飞行时间质谱的非标记蛋白定量检测方法学研究

以四极杆飞行时间质谱检测的蛋白肽段的质谱信息为基础,开发了一种简单、准确的蛋白定性、定量检测方法,并用于牛血清白蛋白的定性、定量检测。对酶解肽段的梯度洗脱条件和流速等液相色谱条件进行了优化;进行蛋白样品的酶解及质谱检测,利用MassHunter定量软件对数据进行分析;为减少假阳性结果的出现,实验优化了数据处理软件中的设置参数,并对方法的重现性进行了考察。结果显示,重复检测的8个肽段峰面积的RSD均在3.0%以下。该方法对牛血清白蛋白的检出限为100 ng。实验发现,样品中蛋白的含量与检测到的肽段匹配率呈对数关系,并从检测到的丰度较高的8个肽段中确定可用于BSA蛋白定性检测的肽段为:HLVDEPQNLIK,定量检测的肽段为:ATEEQLK,方法的回收率为106%。该方法操作简便,检测快速,成本较低,专一性强,可用于蛋白特异性肽段的筛选及复杂生物样品中蛋白的检测。     

银辅助化学刻蚀半导体材料

微电子器件的发展趋势是小型化和多功能化,这就对半导体材料的加工技术提出了更高的要求。与传统的加工技术相比,近年发展起来的贵金属粒子辅助化学刻蚀半导体材料制备微结构技术因操作简单、不需要精密设备、反应迅速和可批量生产等优点引起了国内外学者的广泛关注。本文以Si为主,详细介绍了Ag辅助化学刻蚀半导体材料的机理、反应现象及影响因素,总结了各种微结构的制备技术及其应用。此外,对Ge,Si1-xGex和GaAs等其他半导体材料的贵金属粒子辅助化学刻蚀技术也进行了综述。同时分析了贵金属粒子辅助化学刻蚀半导体目前存在的问题,并对未来的研究方向进行了展望。