CH3I分子束激光裂解产物的分布

The photofragmentation of CH_3I at 249 nm has been investigated by means of our crossed laser-molecular beam apparatus with rotatable supersonic beam source. The measured I~*/I yield ratio is about 4/1. The C—I bond dissociation energy obtained is 56±1 kcal mol~(-1). The vibrational energy distribution of CH_3 fragments has been roughly estimated.     

反应条件对固相合成负载羰基铑原子簇催化剂及其性能的影响

本文报告了由金属盐直接固相合成负载铑络合物或原子簇催化剂的新方法及IR谱表征。CO容易使表面吸附有水分子的RhCl_3/SiO_2还原并生成表面羰基物Rh~+-(CO)_2/SiO_2;CO、CO/H_2和CO/2H_2等不同还原气对表面络合物的生成没有影响。采用H_2还原只能得到金属Rh催化剂。水是重要影响因素,如果RhCl_3/SiO_2先抽空脱水,再用含水的CO还原,就会使Rh~+(CO)_2/SiO_2转化为Rh_6(CO)_(16)/SiO_2。此外,还考察了负载原子簇的CO加氢和热分解反应性能。采用CO还原RhCl_3/SiO_2制备的催化剂同负载原子簇催化剂的反应行为非常相近,而且比传统催化剂具有更高的反应活性。     

Characterization of Nested Hollow Inorganic Fullerene-like Tungsten Disulfide Nanoparticles Prepared by Solid-Gas Reaction

Non-carbon inorganic fullerene-like(IF) nanoscale materials have recently attracted intense interest due to their nested hollow and nanotube structures,In this letter,IF-WS2 nanoparticles prepared by solid-gas reaction were characterized by X-ray diffraction,Scanning electron microscopy and transmission electron microscopy.The results show that the IF-WS2 nanoparticles have a nested hollow closed spherical structure with diameter of 100-150mm.     

Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.     

Preparation and Crystal Structure of PrNb_5O_(14)

ＰｒｅｐａｒａｔｉｏｎａｎｄＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅｏｆＰｒＮｂ_５Ｏ_（１４）￥ＭａｏＪｉａｎｇ－Ｇａｏ；ＺｈｕａｎｇＨｏｎｇ－Ｈｕｉ；ＨｕａｎｇＪｉｎ－Ｓｈｕｎ（ＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｏｆＳｔｒｕｃｔｕｒａｌＣｈｅｍｉｓｔｒｙ...     

An Interesting Approach to Bis—calix [5] arene Analogue from Caxlix[6] arene

By 1,4-bridgine of p-tert-butylcalix [6] arene with 2,6-bis(bromomethyl)-4-methyl-anisole,a new type of bis-calix [5] arene analogue was obtained in high yield.     

A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.     

新型结构炮口制退器的膛口冲击波数值研究与性能分析

面向炮口制退器综合性能设计需求,基于增材制造技术优势,提出了一种叠加冲击式内壁与反作用式外孔特征的新型小口径轻金属炮口制退器方案。基于三维无黏Euler方程,建立了后效期火药气体排空过程的有限元仿真模型,通过膛口流场仿真与流固耦合分析,研究了膛口流场发展、膛口冲击波与超压分布特征、制退器效率与其强度性能。结果表明:相比于传统结构,采用同种轻质钛合金材料的新型制退器具有较高的制退效率,对于机载平台具有较优的膛口超压分布特征和低冲击波危害效应,并且结构强度满足使用要求。     

SEPARATION AND PURIFICATION OF LIGNIN BY MEANS OF ION EXCHANGE PROCESS

The effect of resin structure on desalination of lignin solution was investigated,the optimal structure of resin is as follows;cross linking degree as 4%,ratio of cationogen to anionogen is near 1.with such resin the desalination of lignin was produced very well because the resin has both molecule sieving and ion retardation properties.The sulfonation degress of lignin and total salt content of lignin solution were determinred with ion exchange technique,the relative error less than 1%.The salt content of small molecule in the lignin solution was calculated from sulfonation degree of lignin and total salt.Among gel and macroporous resins the best separation of lignin from reducing sugar was achieved with interpenetrating sulfonated resin 2×1.5×1.The separation of lignin with interpenetrating resin was carried out simultaneously with fractionation of lignin,the effect of fractionation with macroporous sulfonated resin is better than that with interpenetrating resin,but the former has a definite sorption of lignin which decreased the recovery of lignin.     

高硅ZSM—5沸石填充硅橡胶膜的醇—水渗透蒸发分离性质

高硅ZSM－5沸石填充疏水性硅橡胶蓦地低浓度醇－水体度醇－水体的渗透蒸发性质的研究有明，提高沸石硅铝比，增加填充量以及进行酸处理皆有利于改善膜对醇－水的分离系数和通量。料液的成，浓度以及温度对膜的分离性质也有显著影响。