排序方式: 共有98条查询结果,搜索用时 31 毫秒
11.
培养学生的数据分析观念是我国统计教学的核心任务.笔者执教的一节中考考前复习课旨在培养学生用统计的眼光看待问题、分析问题并给出建议和决策. 相似文献
12.
针对高功率掺镱双包层光纤激光器(DCFL)的热效应,由热传导方程并借助速率方程模型导出温度分布的解析解,研究了泵浦方式和泵浦吸收系数对DCFL腔内温度的影响。结果表明:温度沿径向的变化与轴向相比可以忽略;采用传统端面泵浦会导致DCFL局部温度过高,实际中应使用两端对称泵浦方式;而减小泵浦吸收系数虽可改善温度特性但会降低系统的输出功率。进一步分析得出,综合采用分段泵浦方式和不均匀泵浦吸收系数可实现温度分布和输出功率的最佳匹配。 相似文献
13.
14.
为提高光载无线系统传输容量,提出一种混合频相调制信号光学产生技术。利用保偏光纤布拉格光栅对不同输入偏振态响应不同的特性,将加载到信号偏振态的基带信息转换到输出波长上,并通过在接收端的外插拍频实现频率调制。同时通过光学相位调制将信息映射到拍频产生的微波信号上,最终产生混合频相调制信号。搭建基带传输式光载无线系统,验证了该信号产生方法的有效性。产生了码率为1Gbit/s、频率为12.5GHz/9.5GHz的混合频相调制信号,该信号经过5km光纤传输后由接收端解调。信号的时域波形及解调后信号眼图与星座图等结果证明了所产生的混合频相调制信号的可靠性。 相似文献
15.
综合等效介质理论和表面等离子激元(SPP)Bloch模型,对比分析了两种新的亚波长光栅结构:二维矩形金属光栅和二维椭圆柱金属光栅。利用时域有限差分(FDTD)算法,对比分析了两种结构的透射率及其相位延迟与入射光波长及偏振角变化的关系,尤其两种结构实现λ/4波片功能所对应的透射特性。仿真结果表明,当入射光偏振角为75°时,两种结构均可实现λ/4波片功能,此时二维矩形和椭圆柱金属光栅的透射率分别为0.77和0.67,表明二维矩形金属光栅比椭圆柱光栅具有更好的透射效果。对应550~800nm的入射波长,两种光栅在各自允许的入射偏振角范围内均表现了较为平坦的宽带透射特性。 相似文献
16.
Polarization switching and synchronization of mutually coupled vertical-cavity surface-emitting semiconductor lasers
下载免费PDF全文
![点击此处可从《中国物理》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Polarization switching (PS) dynamics and synchronization
performances of two mutually coupled vertical-cavity
surface-emitting lasers (VCSELs) are studied theoretically in
this paper. A group of dimensionless rate equations is derived
to describe our model. While analysing the PS characteristics,
we focus on the effects of coupling rate and frequency detuning
regarding different mutual injection types. The results indicate
that the x-mode injection defers the occurrence of PS, while
the y-mode injection leads the PS to occur at a lower current.
Strong enough polarization-selective injection can suppress the
PS. Moreover, if frequency detuning is considered, the effects
of polarization-selective mutual injection will be weakened. To
evaluate the synchronization performance, the correlation
coefficients and output dynamics of VCSELs with both pure mode
and mixed mode polarizations are given. It is found that
performance of complete synchronization is sensitive to the
frequency mismatch but it is little affected by mixed mode
polarizations, which is opposite to the case of
injection-locking synchronization. 相似文献
17.
建立了高功率掺镱双包层光纤激光器的速率方程模型与热应力模型,对影响受激拉曼散射效应和热应力效应的关键参数(如纤芯半径、光纤长度、泵浦波长、泵浦方式)进行了数值模拟。结果表明:对于较小的纤芯半径,光纤内的斯托克斯光功率较大且增长迅速,因此增加纤芯半径能有效减弱受激拉曼散射效应;减小光纤长度能提高受激拉曼散射的阈值,而纤芯的热应力也增大,因此在不出现热应力引起光纤断裂的情况下,可以减小光纤长度以提高输出功率;采用976 nm波段泵浦源能提高输出功率,降低热应力的影响;两端均匀泵浦方式可以有效降低纤芯热应力,同时维持高功率输出。 相似文献
18.
以单周期信号为例,数值模拟并讨论了注入频率和注入光场波动强度对主从式半导体激光器同步性能的影响。分别通过直接调制和外部调制两种方式获得单周期信号,并采用改进的参数——相似指数评价系统的同步性能。研究结果表明:当注入强度足够大时,系统实现注入锁定同步,外部调制的相似指数大于内部调制;注入强度恒定时,同步品质几乎不受调制指数的影响,而受调制频率的影响;由于内部、外部调制引起主激光器的输出反相,两种调制方式下同步品质随调制频率的变化趋势也相反。 相似文献
19.
A master-slave configuration used to control the nonlinear behaviors arising in a vertical cavity surface emitting laser (VCSEL) with strong external optical feedback is established. In terms of bifurcation diagram, time and frequency domain, the influence of the continuous optical injection from the master VCSEL on the nonlinear characteristics of the slave is investigated theoretically. For relatively weak injection, the slave still keeps its intrinsic nonlinear state. With increasing the injection strength, these nonlinear behaviors evolve to periodic fluctuation, and at last are replaced by the steady-state (e.g. the critical injection parameter for steady-state is 1.2 when external cavity's reflectivity and length are 4% and 4 cm, respectively). During this evolution the bifurcation-contraction phenomena are also observed. 相似文献
20.