压差式矢量水听器方位估计中的干扰抵消

矢量水听器由于能获取声场中标量（声压）和矢量（振速）信息，因此单个的矢量水听器就可实现目标方位估计。单个矢量水听器是利用信号的声压和质点振速之间相关性进行信号方位估计，但是当存在干扰，并且干扰和信号之间相关时，如果对运用能量流进行方位估计的方法不加改进，则会出现很大的误差，甚至出现错误的估计。本文提出一种存在已知噪声干扰情况下的干扰抵消方法，并针对该方法进行了仿真试验，最后运用湖试数据进行了验证。结果表明，该方法能有效地减弱相千千柑对信号的影响，实现对信号的方位估计。     

He-HCl体系各向异性势及分波散射截面的理论研究

首先用BFW势函数形式拟合了在CCSD(T)/aug-cc-pVQZ理论水平下计算的He-HCl相互作用能数据，获得了He原子与HCl分子相互作用的各向异性势；然后采用CC近似方法计算了He-HCl碰撞体系的微分散射截面和分波散射截面，并总结了分波散射截面的变化规律.结果表明，拟合势不但表达形式简洁，而且较好地描述了He-HCl系统相互作用的各向异性特征；利用碰撞体系分子间势的量子化学从头计算结果，可解决势能参数难以确定的问题.对进一步研究原子与分子碰撞机理有一定参考价值. 关键词： 各向异性势 势能参数 密耦近似 分波散射截面     

五种典型硝基苯胺类炸药的静电势与撞击感度的关系研究

利用HONDO程序包,采用从头算法对硝基苯胺类炸药的分子结构和电偶极矩等性质以及 C-NO2键中点静电势等进行计算,讨论了硝基苯胺类炸药C-NO2键中点静电势最大值Vmidmax与其实验撞击感度之间的关系.研究表明:对于硝基苯胺类炸药,不宜单独用C-NO2键中点静电势最大值Vmidmax来表征撞击感度的变化,但可以用静电势最大值Vmidmax与电偶极矩的积来确定其撞击感度的变化趋势,讨论了硝基和胺基的相对位置以及硝基和胺基的数目对这类炸药感度的影响.     

Cu的类F、类Ne和类Na离子的相对论多组态计算和相关效应的讨论

本文应用加Briet与QED修正的相对论多组态方法对Cu的类F、类Ne和类Na离子的精细结构能级和跃迁参数进行了计算,获得的数据和文献值符合很好。对相对论多组态方法中的相关效应做了分析与讨论,以高剥离度Cu离子为例,总结出判断非动力学相关与动力学相关效应大小的一些规则。     

高能重离子碰撞中的末态分布与夸克物质信号

本文结合液体动力学模型与状态方程,分析讨论了高能重离子碰撞过程中是否发生相变以及相变的级次对末态分布的影响.由于集体效应随入射能量和核质量的增加而加强,预计对于RHIC(每对核子能量S=100+100GeV)上进行的¹⁹⁷Au-¹⁹⁷Au碰撞,快度分布有可能作为夸克物质形成的信号.     

A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

X-ray spectra of high temperature tungsten plasma calculated with collisional radiative model

Tungsten is regarded as an important candidate of plasma facing material in international thermonuclear experimental reactor （ITER）, so the determination and modeling of spectra of tungsten plasma, especially the spectra at high temperature were intensely focused on recently. In this work, using the atomic structure code of Cowan, a collisional radiative model （CRM） based on the spin-orbit-split-arrays is developed. Based on this model, the charge state distribution of tungsten ions is determined and the soft X-ray spectra from high charged ions of tungsten at different temperatures are calculated. The results show that both the average ionization charge and line positions are well agreed with others calculations and measurements with discrepancies of less than 0.63% and 1.26%, respectively. The spectra at higher temperatures are also reported and the relationship between ion abundance and temperature is predicted in this work.     

First-principles study of Ar adsorptions on the （111） surfaces of Pd, Pt, Cu, and Rh

In the present paper we give a detailed report on the results of our first-principles investigations of Ar adsorptions at the four high symmetry sites on M （111） （M =Pd, Pt, Cu, and Rh） surfaces. Our studies indicate that the most stable adsorption sites of Ar on Pd （111） and Pt （111） surfaces are found to be the fcc-hollow sites. However, for Ar adsorptions on Cu （111） and Rh （111） surfaces, the most favorable site is the on-top site. The density of states （DOS） is analyzed for Ar adsorption on M （111） surfaces, and it is concluded that the adsorption behavior is dominated by the interaction between 3s, 3p orbits of Ar atoms and the d orbit of the base metal atoms.     

First principles study of ceramic materials (IVB group carbides) under ultrafast laser irradiation

Group IVB carbides have been applied in extreme aerospace environments as hard ceramic coatings; ZrC is being considered as a replacement for SiC in nuclear reactors. Therefore, a thorough understanding of the laser irradiation response of group IVB carbides is of clear significance. However, the existing knowledge on the fundamental properties of IVB group carbides is limited and insufficient with regard to both irradiated and non-irradiated characteristics. We investigate the effect of ultrafast laser irradiation on the lattice stability of ceramic materials(IVB group carbides) using the density functional perturbation theory(DFPT). The calculated phonon frequencies of TiC and ZrC at the ground state are in good agreement with previous calculations and experimental values. The phonon frequencies of IVB group carbides are positive, even though the electronic temperature reached 5 eV. Thus, IVB group carbides are more stable under ultrafast laser irradiation, which has greater benefits in nuclear and aeronautical applications compared to metals(W,Na), semimetals(Bi),and semiconductors(Si,SiC). The thermodynamic properties of ZrC are calculated as functions of their lattice temperature at different electronic temperatures. The elastic shear constants of IVB group carbides satisfy the Born stability criteria at Te = 5 eV. In addition, a comparison of the predicted melting temperatures of IVB group carbides, reveal that HfC is better suited for extreme high-temperature environments.     

Al原子在Pb基底上的沉积过程研究

利用分子动力学方法模拟了Al原子在Pb基底上的沉积过程. 对Al原子在Pb基底(001)面上沉积的形态与Pb原子在Al(001)基底上沉积的形态做了比较. 由于界面间势垒的不同, 两个体系界面间的形态有明显的差异. 分析了基底温度、基底晶面指向、沉积原子的入射动能对界面间原子混合的影响. 模拟结果显示: 随着基底温度升高, 基底原子的可移动性大大增加, 与沉积原子发生较大程度的混合; 入射能的改变对界面间原子的混合影响很小; 基底表面取不同的晶格指向时, 基底与沉积原子间的混合行为也有明显的不同. 利用径向分布函数分析了沉积原子的入射能对薄膜中原子排列有序性的影响. 较高入射能对应更有序的薄膜结构; 由径向分布函数的结构可以推测Al原子在Pb(001)基底表面沉积时界面间可能有金属间化合物生成. 关键词： Pb/Al体系 沉积过程 分子动力学 入射能