Cu的类F、类Ne和类Na离子的相对论多组态计算和相关效应的讨论

本文应用加Briet与QED修正的相对论多组态方法对Cu的类F、类Ne和类Na离子的精细结构能级和跃迁参数进行了计算,获得的数据和文献值符合很好。对相对论多组态方法中的相关效应做了分析与讨论,以高剥离度Cu离子为例,总结出判断非动力学相关与动力学相关效应大小的一些规则。     

“神光”Ⅱ黑腔物理分解实验

本项目主要关注金腔靶内辐射烧蚀等离子体运动对辐射场特性及其诊断产生的影响和抑制方法。黑腔诊断口附近金等离子体喷射容易造成堵口现象，对X光发射能谱特性和角分布测量产生不利影响。腔内金等离子体向心运动还会使入射激光光路偏折，从而改变着靶点位置和能量沉积区域，影响腔内辐射场分布。为便于实验诊断分析，采用半腔靶和静态充气腔靶两种分解靶型进行研究，分别对应以下研究内容：了解金腔靶诊断口附近等离子体喷射对X光诊断的影响和抑制方法；利用填充气体抑制腔壁金等离子体喷射，证实静态充气黑腔靶实验的技术可行性。     

A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

X-ray spectra of high temperature tungsten plasma calculated with collisional radiative model

Tungsten is regarded as an important candidate of plasma facing material in international thermonuclear experimental reactor （ITER）, so the determination and modeling of spectra of tungsten plasma, especially the spectra at high temperature were intensely focused on recently. In this work, using the atomic structure code of Cowan, a collisional radiative model （CRM） based on the spin-orbit-split-arrays is developed. Based on this model, the charge state distribution of tungsten ions is determined and the soft X-ray spectra from high charged ions of tungsten at different temperatures are calculated. The results show that both the average ionization charge and line positions are well agreed with others calculations and measurements with discrepancies of less than 0.63% and 1.26%, respectively. The spectra at higher temperatures are also reported and the relationship between ion abundance and temperature is predicted in this work.     

First-principles study of Ar adsorptions on the （111） surfaces of Pd, Pt, Cu, and Rh

In the present paper we give a detailed report on the results of our first-principles investigations of Ar adsorptions at the four high symmetry sites on M （111） （M =Pd, Pt, Cu, and Rh） surfaces. Our studies indicate that the most stable adsorption sites of Ar on Pd （111） and Pt （111） surfaces are found to be the fcc-hollow sites. However, for Ar adsorptions on Cu （111） and Rh （111） surfaces, the most favorable site is the on-top site. The density of states （DOS） is analyzed for Ar adsorption on M （111） surfaces, and it is concluded that the adsorption behavior is dominated by the interaction between 3s, 3p orbits of Ar atoms and the d orbit of the base metal atoms.     

MgS和MgSe带隙的GW近似修正

应用基于密度泛函理论下的局域密度近似（DFT-LDA）方法研究了岩石矿结构的 MgS和MgSe的晶体结构和能带结构。本文得到稳定结构的晶格常数与已知实验数据相吻合,MgS和MgSe都是间接带隙半导体且带隙值分别为2.74 eV和1.70 eV。尽管本文利用LDA计算的带隙值与之前的理论值很接近,但是局域密度近似常常低估带隙值。因此应用准粒子GW（G是格林函数,W是库伦屏蔽相互作用）近似 对MgS和MgSe的带隙值进行了修正,其结果分别为4.15eV和2.74 eV。GW近似的结果应该是合适的值。     

五种典型硝基苯胺类炸药的静电势与撞击感度的关系研究

利用HONDO程序包,采用从头算法对硝基苯胺类炸药的分子结构和电偶极矩等性质以及 C-NO2键中点静电势等进行计算,讨论了硝基苯胺类炸药C-NO2键中点静电势最大值Vmidmax与其实验撞击感度之间的关系.研究表明:对于硝基苯胺类炸药,不宜单独用C-NO2键中点静电势最大值Vmidmax来表征撞击感度的变化,但可以用静电势最大值Vmidmax与电偶极矩的积来确定其撞击感度的变化趋势,讨论了硝基和胺基的相对位置以及硝基和胺基的数目对这类炸药感度的影响.     

F·伦敦:和"能量子"同年降生的低温物理学家

拟就弗里茨·伦敦这位为人知之甚少但颇具特色的低温物理学家的生平和业绩，作一简要的介绍．     

氧化亚氮3000—0200和1001—0110跃迁带在高温下的线强度

采用乘积近似法计算了氧化亚氮分子的总配分函数，其中转动配分函数考虑了离心扭曲修正，振动配分函数采用谐振子近似. 利用计算所得的配分函数和实验振动跃迁矩平方及Herman-Wallis因子系数，计算了氧化亚氮3000—0200和1001—0110跃迁带在常温和高温下的线强度. 结果显示，当温度高达3000K时，计算所得线强度与实验值及HITRAN数据库提供的结果仍符合较好. 这表明高温下的分子配分函数和线强度的计算是可靠的. 还进一步计算了氧化亚氮3000—0200和1001—0110跃迁带在更高温度(40 关键词： 氧化亚氮 配分函数 线强度 高温     

用扩散蒙特卡罗方法研究BH2, B(OH)2, BCl2和BCl的键离解能

采用扩散蒙特卡罗(DMC)方法计算了BH₂, B(OH)₂, BCl₂和BCl的HB-H和HOB-OH的键离解能, 同时也研究了轨道选择和Backflow变换对DMC计算结果的影响． 在Slater-Jastrow DMC(SJ-DMC)计算方法中,当采用B3PW91轨道时得到的HB-H和HOB-OH键离解能分别是359.1±0.12和98.2±0.12 kJ/mol;用B3LYP SJ-DMC计算键离解能得到了与用B3PW91 SJ-DMC方法类似的结果．通过BF-DMC(即在DMC中引入backflow修正)计算得到的HB?H键离解能为369.6±0.12 kJ/mol,也得到了更加接近实验值的HOB-OH键离解能为446.0±1.84 kJ/mol．由DMC的计算结果可以断定HB?H的键离解能的实验值为375.8 kJ/mol．另外还给出了BCl2和BCl的键离解能的计算结果.