A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

氮分子A3Σu+、B3Пg、C3Пu电子态的高温高振转光谱研究

采用态平均（CASSCF）/高度相关多参考组（MRCI）方法,对N2分子A3Σu+、B3Пg、C3Пu电子态的势能、跃迁偶极矩进行了高度相关的精确计算．计算的势能在平衡位置附近与RKR拟合的势能曲线非常一致,获得的跃迁偶极矩与已有实验值符合很好。首次对A3Σu+、B3Пg、C3Пu电子态的振转光谱常数随振动量子数v的变化进行系统定量计算,其结果与已有的实验观测数据相符．同时,获得了N2分子第一正带系的0-1、0-2、1-0、1-2、1-3、2-0、2-1、2-3、3-0、3-1和3-2光谱带分别在300,3000,6000,10000K时的谱线强度,如1-0带在3000,6000,10000K时的高温谱线带强度分别为1.58543×10-16 cm-1/(分子 cm-2)、6.07889×10-17 cm-1/(分子 cm-2)和2.3781×10-17 cm-1/(分子 cm-2)．这些结果对N2分子进一步的理论研究、实际应用和高温大气的建模与研究具都有一定的参考价值．     

一个二阶方程的振动性质及其应用

本文研究了一个二阶微分方程的解及其振动性质,利用它获得了一般二阶自共轭方程的振动性判别准则,特别对其中一类二阶微分方程的振动性给出了定量的判别方法.推广了E.Hille的工作,使E.Hille的研究结论成为本文结果的极特殊的情形,同时对一类具有“积分小”系数或可化为具有“积分小”系数的二阶微分方程的振动性与非振动性给出了简便、精确的判别方法.     

高功率半导体激光器倍频实现紫外光输出

采用中心波长780 nm、线宽0.13 nm的体布拉格光栅外腔半导体激光作为基频光,基于Ⅰ类相位匹配的三硼酸锂晶体(LBO),获得了中心波长为390 nm的倍频光输出,输出功率30 μW,转换效率0.01%,为高功率紫外光束的实现提供了新的技术路线。     

四角锥氧化锌的制备及其强蓝光发射性质研究

采用热蒸发锌(Zn)粉的方法制备了大量的ZnO纳米棒状和四角锥状结构。用扫描电子显微镜(SEM)、拉曼光谱(Raman Spectra)和光致发光谱(PL)对样品进行了形貌,结构和发光特性分析。结果表明:合成的ZnO纳米棒具有良好的晶体结构,直径约100～500 nm,长度约2～5μm,还有一些四角锥状结构。在325 nm波长光激发下,有微弱的391 nm带边紫外发射和很强的488 nm蓝光发射,呈现出纳米ZnO优异的蓝光特性,并对其生长机理和发光机理进行了初步的探讨。     

相互作用势对模拟计算单壁碳纳米管物理吸附储氢的影响

采用巨正则Monte Carlo方法模拟氢分子在单壁碳纳米管中的储存与分布,重点研究了Lennard-Jones势、Crowell-Brown势和Silvera- Goldman势对模拟计算单壁碳纳米管物理吸附储氢的影响.计算结果显示,碳纳米管与氢分子间的相互作用宜采用Lennard-Jones势描述;氢分子与氢分子间相互作用的描述则与碳纳米管的管径有关,管径较小时选Lennard-Jones势较佳,管径偏大时取七参数Silvera-Goldman 势更为合理,而三参数Silvera-Goldman势则不宜采用;并给出了相应的理论解释.     

Pico-second photoelectric characteristic in manganite oxide La0.67Ca0.33MnO3 films

Ultrafast photoelectric characteristic has been observed in La_0.67Ca_0.33MnO₃ films on tilted SrTiO₃ substrates. A pico-second (ps) open-circuit photovoltage of the perovskite manganese oxide films has been obtained when the films were irradiated by a 1.064μm laser pulse of 25 ps duration. The rise time and full width at half-maximum of the photovoltage pulse are ～300 ps and ～700 ps, respectively. The photovoltaic sensitivity was as large as ～500 mV/mJ.     

基于信息化平台的光学课程系统改革

一、问题提出 课程建设是高等学校教学改革工程的重要组成部分，是提高教学质量的重要途径。如何在课程建设中体现现代教育思想的先进性、科学性、综合性、开放性的特点，以及怎样合理运用现代教学技术、方法和手段，提高教学质量是当前课程建设中重点研究的问题。为此，从2000年开始，我们基于信息化平台系统地进行了光学课程的教学内容、教学手段和方法、     

对称陀螺分子NH3的高温谱线强度研究

在直接计算分子配分函数的基础上,将无转动跃迁偶极矩平方近似为一常数,计算了对称陀螺分子NH3,0300a-0000 s跃迁在高温下的线强度.在296 K,计算的分子总配分函数与HITRAN数据库的结果符合很好,只有O.19%的百分误差.计算的跃迁线强度在2000 K和3000 K的高温与HITRAN数据库的结果也符合相当好,最大百分误差分别为-0.65%和-1.77%.这就表明分子配分函数和线强度的高温计算是可靠的.在此基础上,计算被扩展到更高温度,报道了对称陀螺分子NH30300 a-0000 s跃迁在极端高温4000和5000 K的模拟光谱.计算结果对大气分子高温光谱的实验测量和理论研究均有一定的参考价值.