Design and Fabrication of 1.06 μm Resonant-Cavity Enhanced Reflective Modulator with GaInAs/GaAs Quantum Wells

A resonant-cavity enhanced reflective optical modulator is designed and fabricated, with three groups of three highly strained InGaAs/GaAs quantum wells in the cavity, for low voltage and high contrast ratio operation. The quantum wells are positioned in antinodes of the optical standing wave. The modulator is grown in a single growth step in an molecular beam epitaxy system, using GaAs/AlAs distributed Bragg reflectors as both the top and bottom mirrors. Results show that the reflection device has a modulation extinction of 3 dB at -4.5 V bias.     

ASYMPTOTIC APPROXIMATION METHOD AND ITS CONVERGENCE ON SEMI-INFINITE PROGRAMMING

The aim of this article is to discuss an asymptotic approximation model and its convergence for the minimax semi-infinite programming problem. An asymptotic surrogate constraints method for the minimax semi-infinite programming problem is presented by making use of two general discrete approximation methods. Simultaneously, the consistence and the epi-convergence of the asymptotic approximation problem are discussed.     

三角B-B曲面在非结构网格生成中的应用

基于生成非结构化网格的Delaunay三角形化方法,应用三次三角Bernstein-Bézier曲面来控制网格点的分布情况。对于给定边界,利用三次非均匀B样条进行边界的拟合及重新离散。对初始化形成的Delaunay三角形,应用三次三角Bernstein-Bézier曲面来计算位于其中的点的长度标尺,通过对三角Bernstein-Bézier曲面边界点的定义来控制三角形内长度标尺的分布。对复杂通道网格剖分的实例表明,此方法可以很好地控制内部网格点的分布情况。     

Is Kano-Nucleon Interaction Consistent with Pentaquark θ^＋

The quark-delocalization colour-screening model is employed to calculate the effective potential between nucleon and kaon. The results show that the potentials are attractive in the I = 0 channel and repulsive in the I = 1 channel. The interactions are very weak between K^＋n or K^0p due to the cancellation between I = 0 and I = 1. It is possible to have a high s-wave resonance （1615 MeV）, but the width may be too wide to be observed in the experiments.     

基于界面跟踪方法的汽蚀模型和算法的有效性验证

针对两相附着汽蚀流动机理,基于界面跟踪方法发展了新的汽蚀模型和算法。所发展的汽蚀模型和算法不仅考虑了液相／气相界面处的压力差,而且考虑了耦合Reynolds-Averaged Navier-Stokes方程求解技术得到的流场压力梯度信息来迭代计算附着汽蚀形状。采用具有试验数据的半球形头部圆柱体汽蚀绕流作为算例来验证所提出的汽蚀模型和算法的有效性。采用不同的网格数和松弛因子数值验证了发展的汽蚀模型和算法的有效性。三种汽蚀数下的数值计算结果得到的压力系数分布与试验数据完全吻合。结果表明所提出的汽蚀模型和算法能够准确模拟出汽蚀发生点和汽蚀长度。     

各向异性接合材料界面端部场数值分析

为了求解各向异性接合材料界面端部奇异性应力场,建立了一种新型杂交元模型.该模型的独特之处在于:基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元.通过算例证明,新型杂交元模型能够利用较少的单元数获得较为精确的数值结果.当前模型应用范围广泛,能够用于复杂结构的界面端部场求解.     

800nm激光泵浦掺Nd^3＋的氟化物玻璃光纤正向双程超荧光分析

从实验上探讨了掺Ｎｄ＾３＋的氟化物玻璃光纤正向双程超荧光基本特性，包括输入－输出特性、输出－带宽特性以及输出－波长（激发）特性。并给出了理论上的拟合公式，实验表明利用氟化物玻璃光纤有望获得性能优异的有应用前景的低相干度集成化光源。     

丙氨酸稀土二元和三元配合物的pH电位法研究

本文报道在生理条件下(37℃,I=150 mmol/L NaCl)用pH电位法研究Ala-Ln、GIu—Ln及Ala-Glu-Ln中(Ala=L-丙氨酸,Glu=L-谷氨酸,Ln=Ce,Pr,Nd,Y)二元及三元配合物的稳定常数,运用MINIQUAD-82A程序确定粒子组成,并由COMPLEX程序获得配位粒子分布图,结果表明,三价稀土离子形成配合物的稳定顺序为:Ce相似文献   

铁酸镁超微粒子的制备及结构特征

采用两种方法制得了尖晶石结构纯相MgFe2O4样品．Moessbauer分析发现，一种样品表现出了完全的超顺磁性，另一种表现出了部分超顺磁性．这揭示出了样品具有很小的粒子尺度．首次在实验上发现了MgFe2O4IR-V2谱带的劈裂现象，报导了拉曼光谱，通过ESR分析，进一步揭示了两样品的结构特征，并讨论了性质之间的相关性。