钝化低温法生长多层InGaN量子点的结构和光学特性

采用一种新方法生长多层InGaN/GaN量子点,研究所生长样品的结构和光学特性。该方法采用了低温生长和钝化工艺,所以称之为钝化低温法。第一层InGaN量子点的尺寸平均宽度40nm,高度15nm,量子点密度为6.3×10¹⁰/cm²。随着层数的增加,量子点的尺寸也逐渐增大。在样品的PL谱测试中,观察到在In(Ga)As材料系中普遍观察到的量子点发光的温度特性---超长红移现象。它们的光学特性表明:采用钝化低温法生长的纳米结构中存在零维量子限制效应。     

Structural and Magnetic Properties of Sm Implanted GaN

The structural and magnetic properties of Sm ion-implanted GaN with different Sm concentrations are investigated. XRD results do not show any peaks associated with second phase formation. Magnetic investigations performed by superconducting quantum interference device reveal ferromagnetic behavior with an ordering tem- perature above room temperature in all the implanted samples, while the effective magnetic moment per Sin obtained from saturation magnetization gives a much higher value than the atomic moment of Sm. These results could be explained by the phenomenological model proposed by Dhar et al. [Phys. Rev. Lett. 94（2005）037205, Phys. Rev. B 72（2005）245203] in terms of a long-range spin polarization of the GaN matrix by the Sm atoms.     

Rapid Thermal Annealing Effects on Structural and Optical Properties of Self-Assembled InAs／GaAs Quantum Dots Capped by InAIAs／InGaAs Layers

Effects of rapid thermal annealing on the optical and structural properties of self-assembled InAs/GaAs quantum dots capped by the InAlAs/InGaAs combination layers are studied by photoluminescence and transmission electron microscopy. The photoluminescence measurement shows that the photoluminescence peak of the sample after 850℃ rapid thermal annealing is blue shifted with 370meV and the excitation peak intensity increases by a factor of about 2.7 after the rapid thermal annealing, which indicates that the InAs quantum dots have experienced an abnormal transformation during the annealing. The transmission electron microscopy shows that the quantum dots disappear and a new InAlGaAs single quantum well structure forms after the rapid thermal annealing treatment. The transformation mechanism is discussed. These abnormal optical properties are attributed to the structural transformation of these quantum dots into a single quantum well.     

Broad gain,continuous-wave operation of InP-based quantum cascade laser at λ~11.8 μm

We demonstrate a broad gain, continuous-wave (CW) operation InP-based quantum cascade laser (QCL) emitting at 11.8 μm with a modified dual-upper-state (DAU) and diagonal transition active region design. A 3 mm cavity length, 16.5 μm average ridge wide QCL with high-reflection (HR) coatings demonstrates a maximum peak power of 1.07 W at 283 K and CW output power of 60 mW at 293 K. The device also shows a broad and dual-frequency lasing spectrum in pulsed mode and a maximum average power of 258.6 mW at 283 K. Moreover, the full width at half maximum (FWHM) of the electroluminescent spectrum measured at subthreshold current is 2.37 μm, which indicates a broad gain spectrum of the materials. The tuning range of 1.38 μm is obtained by a grating-coupled external cavity (EC) Littrow configuration, which is beneficial for gas detection.     

Determination of the transport properties in 4H-SiC wafers by Raman scattering measurement

The free carrier density and mobility in n-type 4H-SiC substrates and epilayers were determined by accurately analysing the frequency shift and the full-shape of the longitudinal optic phonon--plasmon coupled (LOPC) modes, and compared with those determined by Hall-effect measurement and that provided by the vendors. The transport properties of thick and thin 4H-SiC epilayers grown in both vertical and horizontal reactors were also studied. The free carrier density ranges between 2×10¹⁸ cm^-3 and 8×10¹⁸ cm^-3 with a carrier mobility of 30--55 cm²/(V·s) for n-type 4H-SiC substrates and 1×10¹⁶--3×10¹⁶ cm^-3 with mobility of 290--490 cm²/(V·s) for both thick and thin 4H-SiC epilayers grown in a horizontal reactor, while thick 4H-SiC epilayers grown in vertical reactor have a slightly higher carrier concentration of around 8.1×10¹⁶ cm^-3 with mobility of 380 cm²/(V·s). It was shown that Raman spectroscopy is a potential technique for determining the transport properties of 4H-SiC wafers with the advantage of being able to probe very small volumes and also being non-destructive. This is especially useful for future mass production of 4H-SiC epi-wafers.     

Influence of thermal stress on the characteristic parameters of AlGaN/GaN heterostructure Schottky contacts

Ni Schottky contacts on AlGaN/GaN heterostructures have been fabricated. The samples are then thermally treated in a furnace with N₂ ambient at 600 ^circC for different times (0.5, 4.5, 10.5, 18, 33, 48 and 72 h). Current-voltage (I-V) and capacitance-voltage (C-V) relationships are measured, and Schrödinger's and Poisson's equations are self-consistently solved to obtain the characteristic parameters related to AlGaN/GaN heterostructure Schottky contacts: the two-dimensional electron gas (2DEG) sheet density, the polarization sheet charge density, the 2DEG distribution in the triangle quantum well and the Schottky barrier height for each thermal stressing time. Most of the above parameters reduce with the increase of stressing time, only the parameter of the average distance of the 2DEG from the AlGaN/GaN interface increases with the increase of thermal stressing time. The changes of the characteristic parameters can be divided into two stages. In the first stage the strain in the AlGaN barrier layer is present. In this stage the characteristic parameters change rapidly compared with those in the second stage in which the AlGaN barrier layer is relaxed and no strain is present.     

Impact of symmetrized and Burt—Foreman Hamiltonians on spurious solutions and energy levels of InAs/GaAs quantum dots

<正>We present a systematic investigation of calculating quantum dots(QDs) energy levels using the finite element method in the frame of the eight-band k·p method.Numerical results including piezoelectricity,electron and hole levels,as well as wave functions are achieved.In the calculation of energy levels,we do observe spurious solutions(SSs) no matter Burt-Foreman or symmetrized Hamiltonians are used.Different theories are used to analyse the SSs,we find that the ellipticity theory can give a better explanation for the origin of SSs and symmetrized Hamiltonian is easier to lead to SSs.The energy levels simulated with the two Hamiltonians are compared to each other after eliminating SSs,different Hamiltonians cause a larger difference on electron energy levels than that on hole energy levels and this difference decreases with the increase of QD size.     

Enhancing redshift phenomenon in time-resolved photoluminescence spectra of AlGaN epilayer

AlGaN epitaxial layer has been studied by means of temperature-dependent time-integrated photoluminescence(PL)and time-resolved photoluminescence(TRPL). An enhancing redshift phenomenon in TRPL spectra with increasing temperature was observed, and the localized excitons behaved like quasi two-dimensional excitons between 6 K and 90 K. We demonstrated that these behaviors are caused by a change in the carrier dynamics with increasing temperature due to the competition of carriers' localization and delocalization in the AlGaN alloy.     

MOCVD生长温度对氧化锌薄膜结构及发光性能的影响

利用甲醇做氧源,采用金属有机物化学气相沉积(MOCVD)工艺在硅(111)衬底上生长了一系列的氧化锌薄膜,生长温度为400～600 ℃.薄膜的表面形貌及晶体质量分别利用场发射扫描电镜及X射线衍射仪进行了测量.研究表明:随着生长温度的降低,在X射线衍射图谱中氧化锌(101)峰取代了(002)峰成为了主峰.这可能是由于温度过低使得甲醇未完全分解,而甲醇分子抑制了氧化锌沿c轴极性过快的生长所致.室温光致发光光谱结果表明在较高生长温度下获得的样品具有良好的光学性质,发光强度随着温度的降低而降低.     

High power terahertz quantum cascade laser

We present high power terahertz quantum laser at about 3 THz based on bound-to-continuum active region design. At 10 K, corrected by the collection efficiency, the maximum peak power of 137 mW is obtained in pulsed mode. What＇s more, we firstly introduce Inonolithically integrated THz quantum cascade laser （QCL） array and the maximum peak power increased to 218 mW after correction. In total, the array shows better performance than single device, implying cheerful prospect.