固定化脂质体色谱研究中药复方的细胞膜通透性成分及其质量控制

提出了固定化脂质体色谱(immobilized liposome chromatography,ILC)研究中药复方的细胞膜通透性成分及其质量控制的方法。以当归补血汤及其组分为例,考察了它们在ILC色谱柱上的分离效果;当归补血汤水提取液和75％乙醇提取液在ILC色谱柱上各有8个保留峰,当归水提取液、甲醇提取液和75％乙醇提取液在ILC色谱柱上分别有3、6、9个保留峰,黄芪水提取液、甲醇提取液和75％乙醇提取液在ILC色谱柱上各有7个保留峰;建立了当归补血汤及其组分中阿魏酸和蒿本内酯的定量分析方法,当归补血汤水提取液和75％乙醇提取液中阿魏酸的含量分别为0．0743％和0．0688％,蒿本内酯的含量分别为0．0472％和0．457％,当归水提取液和75％乙醇提取液中阿魏酸的含量分别为0．0694％和0．0691％,蒿本内酯的含量分别为0．0781％和0．455％。     

(Pt_nMn)~(±,0)(n=1～5)掺杂团簇结构与磁性的密度泛函研究

采用密度泛函理论(Demity Function Theory)中的B3LYP方法,在Lanl2dz赝势基组水平上对(PtnMn)±,0(n=1～5)团簇的几何构型进行了全优化,并对基态的能级以及磁性进行了研究.结果表明:PtMn掺杂团簇的自旋多重度比较高,这种性质跟纯Mn团簇相似.并且发现一般情况下Mn原子参与成键数越多,结构越稳定,在成键数相同的情况下,成键的平均键长越短越稳定;其次(PtnMn)±,0团簇的所有稳定结构都表现为铁磁性耦合;掺杂一个Mn原子后的团簇磁性大大增强,磁矩主要来源于未满的d壳层电子,且Mn原子上的局域磁矩远大于Pt原子.随着Pt原子个数的增加,Mn原子的局域磁矩变化不大,但团簇的总磁矩渐渐增大.     

制备方法对CuO—Ce0．7Zr0．3O2催化剂的氧缺位和CO氧化活性的影响

采用溶胶-凝胶法和溶胶-凝胶 浸渍法两种方法制备了CuO-Ce0.7Zr0.3O2催化剂,并对催化剂进行了XRD、Raman等表征,考察了催化剂的CO氧化性能.研究结果表明,溶胶-凝胶法制备的CuO-Ce0.7Zr0.3O2催化剂的CO氧化活性明显高于溶胶-凝胶 浸渍法制备的CuO/Ce0.7Zr0.3O2催化剂,CuO-Ce0.7Zr0.3O2催化剂容易形成氧缺位和表面高分散CuO的颗粒较大,从而提高催化活性.     

刃型位错和圆弧形刚性线夹杂的干涉效应

位错和夹杂的干涉效应对于理解材料的强化和韧化机理具有十分重要的意义。文中研究了晶体材料中刃型位错和多条共圆弧刚性线夹杂的干涉作用。利用Riemann—Schwarz反照原理和复势函数的奇性主部分析技术，得到了问题的一般解答；对于只含一条刚性线夹杂的情况，给出了复势函数的封闭形式解。由Peach-Koehler公式求出了作用在刃型位错上的位错力，并讨论了圆弧形刚性线夹杂对位错力的影响规律，发现弧形刚性线对刃型位错有很强的排斥作用。本文解答不但可作为格林函数获得任意分布位错的相应解答，而且可以用于研究刚性线夹杂和任意形状裂纹的干涉效应问题。     

高效液相色谱法测定地塞米松及有关物质

建立了高效液相色谱法测定地塞米松及有关物质的方法。采用Kromasil 100-5 C_(18)(250 mm×4. 6 mm,5μm)色谱柱,以水和乙腈为流动相,梯度洗脱,流速1. 5 mL/min,检测波长240 nm,柱温40℃,进样量20μL。在上述色谱条件下,地塞米松与1,2-二氢物、16β-甲基环氧物和17-脱氧-21醇等杂质分离效果好,地塞米松在4～480μg/mL范围内线性关系良好,检测限为0. 32μg/mL,1,2-二氢物、16β-甲基环氧物和17-脱氧-21醇在0. 2～4. 0μg/mL范围内线性关系良好,检测限分别为0. 058,0. 063,0. 060μg/mL。方法可用于测定地塞米松及有关物质的含量。     

多体系统动力学微分／代数方程组数值方法

多体系统动力学微分／代数混合方程组又称Ｅｕｌｅｒ－ｌａｇｒａｎｇｅ方程，是近十年来动力学和计算数学领域研究的热点之一．本文介绍这两个领域中引入的传统的数值积分方法与新的理论．     

无穷远处Ⅲ型均布荷载与集中荷载作用下应变加强层连接唇形裂纹的解析解

通过对保角映射及解析延拓的应用,获得了无穷远处Ⅲ型均布荷载和集中荷载作用下,连接在唇形裂纹面上的内埋应变加强层的级数形式应力解析解．分析了材料匹配、界面连接及几何特征对界面应力的影响,研究发现对于不同的荷载形式,合理的材料匹配、连接及几何特征能够有效地减少应力集中和界面应力．     

Elastic behaviour of an edge dislocation near a sharp crack emanating from a semi-elliptical blunt crack

The interaction between an edge dislocation and a crack emanating from a semi-elliptic hole is dealt with. Utilizing the complex variable method, closed form solutions are derived for complex potentials and stress fields. The stress intensity factor at the tip of the crack and the image force acting on the edge dislocation are also calculated. The influence of the morphology of the blunt crack and the position of the edge dislocation on the shielding effect to the crack and the image force is examined in detail. The results indicate that the shielding or anti-shielding effect to the stress intensity factor increases acutely when the dislocation approaches the tip of the crack. The effect of the morphology of the blunt crack on the stress intensity factor of the crack and the image force is very significant.     

Superconductivity of bilayer titanium/indium thin film grown on SiO_2/Si(001)

Bilayer superconducting films with tunable transition temperature(Tc) are a critical ingredient to the fabrication of high-performance transition edge sensors. Commonly chosen materials include Mo/Au, Mo/Cu, Ti/Au, and Ti/Al systems. Here in this work, titanium/indium(Ti/In) bilayer superconducting films are successfully fabricated on SiO_2/Si(001)substrates by molecular beam epitaxy(MBE). The success in the epitaxial growth of indium on titanium is achieved by lowering the substrate temperature to-150?C during indium evaporation. We measure the critical temperature under a bias current of 10 μA, and obtain different superconducting transition temperatures ranging from 645 m K to 2.7 K by adjusting the thickness ratio of Ti/In. Our results demonstrate that the transition temperature decreases as the thickness ratio of Ti/In increases.