Parasitic effects of air-gap through-silicon vias in high-speed three-dimensional integrated circuits

In this paper,ground-signal-ground type through-silicon vias(TSVs) exploiting air gaps as insulation layers are designed,analyzed and simulated for applications in millimeter wave.The compact wideband equivalent-circuit model and passive elements(RLGC) parameters based on the physical parameters are presented with the frequency up to 100 GHz.The parasitic capacitance of TSVs can be approximated as the dielectric capacitance of air gaps when the thickness of air gaps is greater than 0.75 μm.Therefore,the applied voltage of TSVs only needs to achieve the flatband voltage,and there is no need to indicate the threshold voltage.This is due to the small permittivity of air gaps.The proposed model shows good agreement with the simulation results of ADS and Ansoft's HFSS over a wide frequency range.     

Fast-switching SOI-LIGBT with compound dielectric buried layer and assistant-depletion trench

A lateral insulated gate bipolar transistor (LIGBT) based on silicon-on-insulator (SOI) structure is proposed and investigated. This device features a compound dielectric buried layer (CDBL) and an assistant-depletion trench (ADT). The CDBL is employed to introduce two high electric field peaks that optimize the electric field distributions and that, under the same breakdown voltage (BV) condition, allow the CDBL to acquire a drift region of shorter length and a smaller number of stored carriers. Reducing their numbers helps in fast-switching. Furthermore, the ADT contributes to the rapid extraction of the stored carriers from the drift region as well as the formation of an additional heat-flow channel. The simulation results show that the BV of the proposed LIGBT is increased by 113% compared with the conventional SOI LIGBT of the same length L_D. Contrastingly, the length of the drift region of the proposed device (11.2 μ) is about one third that of a traditional device (33 μ) with the same BV of 141 V. Therefore, the turn-off loss (E_OFF) of the CDBL SOI LIGBT is decreased by 88.7% compared with a conventional SOI LIGBT when the forward voltage drop (V_F) is 1.64 V. Moreover, the short-circuit failure time of the proposed device is 45% longer than that of the conventional SOI LIGBT. Therefor, the proposed CDBL SOI LIGBT exhibits a better V_F-E_OFF tradeoff and an improved short-circuit robustness.     

考虑晶粒尺寸效应的超薄(10–50 nm) Cu电阻率模型研究

结合Marom模型与实验数据, 给出了晶粒尺寸与金属薄膜厚度的关系式. 基于已有的理论模型, 针对厚度为10–50 nm Cu薄膜, 考虑到表面散射与晶界散射以及电阻率晶粒尺寸效应, 提出一种简化电阻率解析模型. 结果表明, 在10–20 nm薄膜厚度范围内, 考虑晶粒尺寸效应后的简化模型与现有实验数据符合得更好. 相对于Lim, Wang与Marom模型, 所提模型的相对标准差分别降低74.24%, 54.85%, 78.29%. 关键词： 表面散射 晶界散射 晶粒尺寸效应 平均自由程     

考虑非均匀温度分布效应的缓冲器插入最优尺寸研究

基于非均匀温度分布效应对互连延时的影响, 提出了一种求解互连非均匀温度分布情况下的缓冲器最优尺寸的模型. 给出了非均匀温度分布情况下的RC互连延时解析表达式, 通过引入温度效应消除因子, 得出了最优插入缓冲器尺寸以使互连总延时最优. 针对90 nm和65 nm工艺节点, 对所提模型进行了仿真验证, 结果显示, 相较于以往同类模型, 本文所提模型由于考虑了互连非均匀温度分布效应, 更加准确有效, 且在保证互连延时最优的情况下有效地提高了芯片面积的利用.     

一种考虑硅通孔电阻-电容效应的三维互连线模型

硅通孔(TSV)是三维集成电路的一种主流技术.基于TSV寄生参数提取模型,对不同物理尺寸的TSV电阻-电容(RC)参数进行提取,采用Q3D仿真结果验证了模型精度.分析TSVRC效应对片上系统的性能及功耗影响,推导了插入缓冲器的三维互连线延时与功耗的解析模型.在45nm互补金属氧化物半导体工艺下,对不同规模的互连电路进行了比较分析.模拟结果显示,TSVRC效应导致互连延时平均增加10%,互连功耗密度平均提高21%;电路规模越小,TSV影响愈加显著.在三维片上系统前端设计中,包含TSV寄生参数的互连模型将有助于设计者更加精确地预测片上互连性能.     

F离子注入新型Al0．25Ga0．75N／GaNHEMT器件耐压分析

为了缓解AlGaN／GaNhighelectronmobilitytransistors（HEMT）器件n型GaN缓冲层高的泄漏电流,本文提出了具有氟离子注入新型Al0．25Ga0．75N／GaNHEMT器件新结构．首先分析得出n型GaN缓冲层没有受主型陷阱时,器件输出特性为欧姆特性,这样就从理论和仿真方面解释了文献生长GaN缓冲层掺杂Fe,Mg等离子的原因．利用器件输出特性分别分析了栅边缘有和没有低掺杂漏极时,氟离子分别注入源区、栅极区域和漏区的情况,得出当氟离子注入源区时,形成的受主型陷阱能有效俘获源极发射的电子而减小GaN缓冲层的泄漏电流,击穿电压达到262v通过减小GaN缓冲层体泄漏电流,提高器件击穿电压,设计具有一定输出功率新型A1GaN／GaNHEMT提供了科学依据．     

Breakdown voltage analysis of Al0.25Ga0.75N/GaN high electron mobility transistors with partial silicon doping in the AlGaN layer

In this paper,two-dimensional electron gas（2DEG） regions in AlGaN/GaN high electron mobility transistors（HEMTs） are realized by doping partial silicon into the AlGaN layer for the first time.A new electric field peak is introduced along the interface between the AlGaN and GaN buffer by the electric field modulation effect due to partial silicon positive charge.The high electric field near the gate for the complete silicon doping structure is effectively decreased,which makes the surface electric field uniform.The high electric field peak near the drain results from the potential difference between the surface and the depletion regions.Simulated breakdown curves that are the same as the test results are obtained for the first time by introducing an acceptor-like trap into the N-type GaN buffer.The proposed structure with partial silicon doping is better than the structure with complete silicon doping and conventional structures with the electric field plate near the drain.The breakdown voltage is improved from 296 V for the conventional structure to 400 V for the proposed one resulting from the uniform surface electric field.     

Breakdown voltage analysis of Al_0.25Ga_0.75N/GaN high electron mobility transistors with partial silicon doping in the AlGaN layer

In this paper,two-dimensional electron gas(2DEG) regions in AlGaN/GaN high electron mobility transistors(HEMTs) are realized by doping partial silicon into the AlGaN layer for the first time.A new electric field peak is introduced along the interface between the AlGaN and GaN buffer by the electric field modulation effect due to partial silicon positive charge.The high electric field near the gate for the complete silicon doping structure is effectively decreased,which makes the surface electric field uniform.The high electric field peak near the drain results from the potential difference between the surface and the depletion regions.Simulated breakdown curves that are the same as the test results are obtained for the first time by introducing an acceptor-like trap into the N-type GaN buffer.The proposed structure with partial silicon doping is better than the structure with complete silicon doping and conventional structures with the electric field plate near the drain.The breakdown voltage is improved from 296 V for the conventional structure to 400 V for the proposed one resulting from the uniform surface electric field.     

A novel low-swing interconnect optimization model with delay and bandwidth constraints

Interconnect power and repeater area are important in the interconnect optimization of nanometer scale integrated circuits.Based on the RLC interconnect delay model,by wire sizing,wire spacing and adopting low-swing interconnect technology,this paper proposed a power-area optimization model considering delay and bandwidth constraints simultaneously.The optimized model is verified based on 65-nm and 90-nm complementary metal-oxide semiconductor(CMOS) interconnect parameters.The verified results show that averages of 36% of interconnect power and 26% of repeater area can be saved under 65-nm CMOS process.The proposed model is especially suitable for the computer-aided design of nanometer scale systems-on-chip.     

高密度等离子体工艺总体模型初探

介绍了与高密度等离子体工艺相关的模型和数值模拟方法,即连续流和动力学方法。在漂流－扩散方程的连续流模型和单元粒子／蒙特卡罗碰撞动力学模型的基础上,提出了一个等离子体工艺模型。讨论了对等离子体鞘层、等离子体刻蚀和淀积过程的模拟方法,提出了一个高密度等离子体工艺总体模型的初步方案。