五乙烯六胺改性金属有机骨架材料MIL-101(Cr)对CO_2的吸附性能

采用溶剂热法合成金属有机骨架材料MIL-101(Cr),用回流法将五乙烯六胺(PEHA)负载到MIL-101(Cr)孔道中的不饱和金属位点上,使用扫描电镜、粉末X射线衍射、氮气物理吸附、元素分析和傅里叶变换红外光谱等表征手段考察材料的结构和形貌,测试氨基改性前后的MIL-101(Cr)在25℃、不同压力下对CO_2的吸附效果。结果表明,负载0.24 m L五乙烯六胺后的MIL-101(Cr)对CO_2的吸附效果最好,在25℃、常压下对CO_2的饱和吸附量可达58.944 mg/g,相比未负载五乙烯六胺的MIL-101(Cr)吸附量(CO_2饱和吸附量为44.208 mg/g)增加了33%。随着吸附压力的增加,MIL-101(Cr)和0.24PEHAM IL-101(Cr)对CO_2的饱和吸附量逐渐增加,当吸附压力为1.1 MPa时,两者的吸附量分别为1 147.59和1 256.74 mg/g,表明该类材料在高压下对CO_2有着良好的吸附效果。     

One step NaBH4 reduction of Pt-Ru-Ni catalysts on different types of carbon supports for direct ethanol fuel cells: Synthesis and characterization

The ternary catalyst Pt₇₅Ru₅Ni₂₀ was conducted on various types of carbon supports including functionalized Vulcan XC-72R (f-CB), functionalized multi-walled carbon nanotubes (f-MWCNT), and mesoporous carbon (PC-Zn-succinic) by sodium borohydride chemical reduction method to improve the ethanol electrooxidation reaction (EOR) for direct ethanol fuel cell (DEFC). It was found that the particle size of the metals on f-MWCNT was 5.20 nm with good particle dispersion. The alloy formation of ternary catalyst was confirmed by XRD and more clearly described by SEM element mapping, which was relevant to the efficiency of the catalysts. Moreover, the mechanism of ethanol electrooxidation reaction based on the surface reaction was more understanding. The activity and stability for ethanol electrooxidation reaction (EOR) were investigated using cyclic voltammetry and chronoamperometry, respectively. The highest activity and stability for EOR were observed from Pt₇₅Ru₅Ni₂₀/f-MWCNT due to a good metal-carbon interaction. Ru and Ni presented in Pt-Ru-Ni alloy improved the activity and stability of ternary catalysts for EOR. Moreover, the reduction of Pt content in ternary catalyst led to the catalyst cost deduction in DEFC.     

Mg/Ce-SBA-15的制备及其苯酚甲醇烷基化性能的研究

以Ce-SBA-15为载体,硝酸镁为活性组分前驱体,通过浸渍法制备了Mg/Ce-SBA-15催化剂。利用XRD、N₂吸附-脱附、SEM、EDS、NH₃-TPD、Py-FTIR和TG-DTA手段对催化剂进行表征。结果表明,Mg掺杂并未破坏载体结构,催化剂表面弱酸含量有所增加,L酸增加明显。在固定床反应器中评价了Mg/Ce-SBA-15分子筛催化苯酚甲醇烷基化的反应性能。结果表明,Mg负载量为7%、焙烧温度为550℃、焙烧时间为4.5 h制备的Mg/Ce-SBA-15催化剂催化效果最佳。在反应温度460℃,n（苯酚）：n（甲醇）为1：4,质量空速为3.0 h^-1,常压的条件下,苯酚转化率为80.1%,邻甲酚选择性为86.4%。     

Mg/Al物质的量比对Ce-La/MgAl2O4-x催化剂催化CO还原NO性能的影响

采用初始浸渍法制备了不同Mg/Al物质的量比的Ce-La/MgAl₂O₄-x催化剂,并通过低温N₂-吸附脱附、XRD、H₂-TPR和CO-TPR等手段对其进行了表征。结果表明,在Mg/Al物质的量比为0.5时,催化剂催化CO还原NO的性能最好。这主要是因为适量Mg的添加促进了CeO₂的分散和Ce-O-La固溶体的形成,从而使得表面Ce³⁺和氧空穴增加。两者的协同作用使得Ce-La/MgAl₂O₄-0.5表现出最佳的催化性能。另外,适量Mg的引入可以抑制Ce（SO₄）₂和Ce₂（SO₄）₃的形成,从而提高了Ce-La/MgAl₂O₄-0.5催化剂抗硫中毒能力。     

Synthesis and catalytic performance of bimetallic NiMo- and NiW-ZSM-5/MCM-41 composites for production of liquid biofuels

This work presents a synthesis of bimetallic NiMo and NiW modified ZSM-5/MCM-41 composites and their heterogeneous catalytic conversion of crude palm oil( CPO) to biofuels. The ZSM-5/MCM-41 composites were synthesized through a self-assembly of cetyltrimethylammonium bromide( CTAB) surfactant with silica-alumina from ZSM-5 zeolite,prepared from natural kaolin by the hydrothermal technique. Subsequently,the synthesized composites were deposited with bimetallic NiMo and NiW by impregnation method. The obtained catalysts presented a micro-mesoporous structure,confirmed by XRD,SEM,TEM,EDX,NH_3-TPD,XRF and N_2 adsorption-desorption measurements. The results of CPO conversion demonstrate that the catalytic activity of the synthesized catalysts decreases in the series of NiMo-ZSM-5/MCM-41 NiW-ZSM-5/MCM-41 Ni-ZSM-5/MCM-41 Mo-ZSM-5/MCM-41 W-ZSM-5/MCM-41 NiMo-ZSM-5 NiW-ZSM-5 ZSM-5/MCM-41 ZSM-5 MCM-41. It was found that the bimetallic NiMo-and NiW-ZSM-5/MCM-41 catalysts give higher yields of liquid hydrocarbons than other catalysts at a given conversion. Types of hydrocarbon in liquid products,identified by simulated distillation gas chromatography-flame ionization detector( SimDis GC-FID),are gasoline( 150-200 ℃; C5-12),kerosene( 250-300 ℃; C5-20) and diesel( 350 ℃; C7-20).Moreover,the conversion of CPO to biofuel products using the NiMo-and NiW-ZSM-5/MCM-41 catalysts offers no statistically significant difference( P 0.05) at 95% confidence level,evaluated by SPSS analysis.     

非晶态MnO_x/TiO_2催化剂的制备及其低温NH_3-SCR性能

采用自发沉积法、共沉淀法及浸渍法制备MnO_x/TiO_2催化剂,通过XRD、TEM、N2吸附-脱附、XPS、H_2-TPR、NH_3-TPD等一系列表征手段研究MnO_x/TiO_2催化剂的结构与性质,并考察MnO_x/TiO_2催化剂低温NH_3-SCR性能。结果表明,自发沉积法制备的MnO_x/Ti O2(s)催化剂具有完全非晶态结构,Mn和Ti之间存在强相互作用,较共沉淀法制备的MnO_x/TiO_2(c)及浸渍法制备的MnO_x/Ti O2(i)表现出更强的氧化还原能力。MnO_x/TiO_2(s)具有较高的比表面积、较多的表面酸量,有利于NH_3的吸附与活化。且表面高浓度的Mn4+离子及吸附氧,有利于将NO氧化为NO2,促进发生"fast-SCR"反应,进而使其表现出优异的低温脱硝性能。MnO_x/TiO_2(s)催化剂在150℃时NO的转化率高达92.8%,在150-350℃NO的转化率保持在90%以上,此外其还具备较强的抗H_2O和SO_2毒化能力。     

Ce-Co/KIT-6介孔材料的制备及其脱汞性能的研究

以P123表面活性剂为模板,采用硬模板法制备了有序介孔材料KIT-6,以KIT-6为载体,Ce(NO_3)_2·6H_2O和Co(NO_3)_2·6H_2O为Ce和Co源,采用溶液浸渍法制备了负载型Ce-Co/KIT-6介孔材料。在模拟烟气条件下,利用固定床实验台架研究了Ce-Co/KIT-6材料对烟气中的单质汞(Hg0)的脱除性能。采用扫描电镜(SEM)、N_2吸附-脱附(BET)、X射线衍射分析(XRD)、傅里叶红外光谱分析(FT-IR)、氢气程序升温还原(H_2-TPR)以及热重分析(TGA)等方法对材料进行表征。结果表明,Ce和Co在KIT-6孔道内部高度分散,同时材料保持高度有序的孔道结构、比表面积高达495.2 m~2/g,孔径4.6 nm。脱汞实验结果表明,Ce-Co/KIT-6对Hg0的氧化吸附去除效率很高,250℃下对Hg0的氧化吸附去除效率高达95%以上,在这个过程中,O_2的存在明显促进了催化剂的脱汞能力。氧通过Ce-Co价态的变化进入金属结构中,再与汞发生反应是这个过程的主要机理。     

CoFe2O4纳米阵列催化剂的费托合成性能研究

通过可控的水热生长方法和钴铁碳酸根氢氧根水合物的焙烧在泡沫铁上制备了CoFe₂O₄纳米阵列催化剂。通过粉末X射线衍射,扫描电镜和电感耦合等离子体发射光谱表征了CoFe₂O₄纳米阵列的晶相,结构和组成。制备的催化剂被用于费托合成性能研究。CoFe₂O₄纳米阵列催化剂在5L/（g·h）的空速下具有69%的转化率,并且其性能优于粉体催化剂。     

Y修饰CuO/ZrO_2催化剂高效催化水煤气变换反应制氢

采用水热法制备了具有不同Y掺杂量的单分散ZrO_2纳米粒子(n(Y)/n(Y+Zr)=0-5%),并以其为载体采用沉积-沉淀法制得CuO/ZrO_2催化剂;考察了富氢气氛下上述催化剂的水煤气变换反应(WGS)催化性能。结果表明,掺杂Y后催化剂的活性明显提高,其中,载体掺杂2%Y的催化剂具有最佳的催化活性,在270℃时的CO转化率高达91.4%,明显高于研究较多的CuO/ZnO和CuO/CeO_2催化剂。X射线粉末衍射、N_2物理吸附-脱附、N_2O滴定、扫描电镜和CO程序升温还原等表征结果表明,Y~(3+)掺入了ZrO_2的晶格并对催化剂的结构和还原性能产生直接影响。Y助剂的引入一方面促进了CuO在ZrO_2表面的分散,提高了催化剂表面活性Cu-[O]-Zr物种的含量;另一方面,改善了催化剂的颗粒单分散性和织构性能。载体掺杂2%Y助剂的样品具有较高的Cu-[O]-Zr物种含量、较佳的颗粒单分散性和织构性能,且其表面的Cu-[O]-Zr物种和活性羟基具有较佳的还原性能,因而表现出较高的催化活性     

SO_2和H_2O(g)对新疆高钠煤中钠挥发和形态迁移的研究

在水平管式炉上进行了400-1 100℃新疆高钠煤恒温燃烧实验,并利用逐级提取的方法分析煤及煤灰中钠的赋存形态,研究煤中钠的释放和形态迁移特性。重点考察700和1100℃下H_2O(g)和SO_2(g)单因素及双因素对煤中无机钠挥发和形态迁移的影响。结果表明,随着温度的升高,煤中钠的释放比例逐渐增大,其中,有机态钠最先析出,其次是水溶态无机钠,硅铝酸盐形式的无机钠则由于高热稳定性不易分解或挥发。低温下(700℃)H_2O(g)的存在降低了钠的挥发,而较高温度下(1 100℃)焦炭与水蒸气反应生成的局部还原性气氛促进煤中钠的挥发,但当入口气氛中H_2O(g)浓度高于20%时,促进作用减小。SO_2的存在抑制了煤中钠的挥发,随着燃烧温度升高,SO_2对钠的抑制作用减弱。H_2O和SO_2双因素作用下,低温下(700℃)抑制了煤中钠的挥发,而较高温度下(1 100℃)钠的挥发特性取决于两者在入口气氛中的浓度。对于选取的高钠煤,20%H2O和2.0×10-3SO_2入口气氛下,1 100℃煤燃烧钠的挥发比例由86%提高到了87.1%。