Time-resolved spectroscopy for 5s~('4)D_(7/2) state transitions undergoing electron–ion recombination in femtosecond laser-produced copper plasma

In the femtosecond laser-produced Cu-plasma, the transient transition dynamics that the excited state 5s~('4)D_(7/2) via electron–ion recombination transfers to 4p~('4)F_(9/2)~0(465.11 nm, Λ1 line) and 4p~('4)D_(7/2)~0(529.25 nm, Λ_2 line) states are investigated by using the time-resolved spectroscopy. The occupation number and relevant lifetime of the excited state 5s~('4)D_(7/2),the temporal evolutions of spectral intensities for Λ_1 line and Λ_2 line emissions are demonstrated to be in direct proportion to the employed laser intensity, which reveals the transient features of transition dynamics clearly differing from that resulted in the traditional collision excitation. Furthermore, some unique characteristics for Λ_1 and Λ_2 transitions stemming from electron–ion recombination are examined in detail.     

基于证据推理的直觉模糊多属性群决策方法

针对属性值为直觉模糊数的多属性群决策问题,提出了一种证据推理的扩展方法。首先,在考虑主观因素与客观因素的基础上运用直觉模糊熵法计算出属性及专家的综合权重。其次,提出一种基于证据推理的直觉模糊信息融合方法,该方法可以避免由于评价值的隶属度为0而导致的信息丢失现象,弥补了现有直觉模糊信息融合方法存在的不足。在此基础上,集结评价信息并按照备选方案与理想方案的相对贴近度对备选方案进行比选。最后,运用实例验证了所提方法的有效性。     

带有运输且加工具有灵活性的无等待流水作业排序问题

研究一类带有运输且加工具有灵活性的两阶段无等待流水作业排序问题, 其中每阶段只有一台机器, 每个工件有两道工序需要依次在两台机器上加工, 工件在两台机器上的加工及两道工序之间不允许等待. 给出两种近似算法, 并分别分析其最坏情况界. 第一种算法是排列排序, 证明了最坏情况界不超过5/2; 第二种算法将工件按照两道工序加工时间之和的递增顺序排序, 证明其最坏情况界不超过2. 最后, 通过数值模拟比较算法的性能. 对问题中各参数取不同值的情况, 分别生成若干个实例, 用算法得到的解与最优解的下界作比值, 通过分析这些比值的最大值、最小值和平均值来比较上述两个算法的性能.     

Crystal structure and ionic conductivity of Mg-doped apatite-type lanthanum silicates La10Si6-x Mgx O27-x（x=0–0.4）

Lanthanum silicates La10Si6-xMgxO27-x(x = 0–0.4) were prepared by solid state synthesis to investigate the effect of Mg doping on crystal structure and ionic conductivity. Rietveld analysis of the powder XRD patterns reveals that Mg substitution on Si site results in significant enlargement of channel triangles, favoring oxide-ion conduction. Furthermore,an increase of Mg concentration significantly influences the linear density of interstitial oxygen, which plays an important role in ionic conductivity. The Arrhenius plots of La10Si6-xMgxO27-x(x = 0–0.4) suggest that Mg-doped samples present higher conductivity and lower activation energy than non-doped La10Si6O27, and La10Si5.8Mg0.2O26.8exhibits the highest conductivity with a value of 3.0×10-2S ·cm-1at 700?C. Such conductive behavior agrees well with the refined results.The corresponding mechanism has been discussed in this paper.     

Effects of interface roughness on photoluminescence full width at half maximum in GaN/AlGaN quantum wells

Low temperature photoluminescence(PL) measurements have been performed for a set of GaN/AlxGa1-xN quantum wells(QWs). The experimental results show that the optical full width at half maximum(FWHM) increases relatively rapidly with increasing Al composition in the AlxGa1-xN barrier, and increases only slightly with increasing GaN well width. A model considering the interface roughness is used to interpret the experimental results. In the model, the FWHM’s broadening caused by the interface roughness is calculated based on the triangle potential well approximation. We find that the calculated results accord with the experimental results well.     

基于长脉冲光源的钠信标回光特性实验研究

采用与信标发射接收系统参数匹配的长脉冲光源,可在脉冲回光时间内产生较亮星等的钠信标,既有利于提高信标探测的信噪比,也有利于实现自适应光学系统的高频闭环校正.基于450 mm直径望远镜和大能量长脉冲光源,开展了钠信标探测实验,得到了长脉冲光源产生的钠信标回光特性.通过CCD和光电倍增管,采集得到了不同发射能量、出射偏振态下的回光强度,并获得了最大强度为15万光子/m2/pulse的回光,对应脉冲回光时间内约4.1等星的亮度.分析推算了实验条件下钠原子的柱密度.实验全过程未出现明显的饱和现象,验证了采用长脉冲钠信标光源避免饱和效应、得到高亮度钠信标的可行性.     

AlGaN合金中局域态和极化电场的竞争机制

通过MOVPE方法生长了不同Al组分的3块Al_xGa_1-xN样品,利用稳态光谱和时间分辨光谱对其样品的光学特性进行了分析。鉴于影响氮化物发光性质的极化电场或局域态的单一机制不能充分解释我们的实验现象,提出了局域态-内部极化电场竞争的机制。通过对实验数据的分析,得出如下重要结论：样品PL峰位蓝移的温度起点基本对应于局域态和极化电场起作用的交替点,PL峰位发生蓝移的温度起点与光强-温度曲线的斜率出现明显变化的温度点一致;随着温度的升高,若AlGaN合金样品中PL峰位存在二次蓝移,则说明样品中电场分布不均匀。     

基于相关法的哈特曼图像网格自动划分方法

在哈特曼波前测量过程中,需要对哈特曼图像进行网格划分用于计算波前斜率。传统的网格划分方法通过观察哈特曼图像手动调整网格位置和网格间距。该方法不但需要人工干预,还给波前实时测量带来困难。为实现哈特曼图像网格划分的自动化,研究了基于相关法的哈特曼图像网格自动划分方法。该方法首先对哈特曼图像进行自相关求取网格行列数以及网格间距,然后利用该网格建立相应的模拟光斑图像,最后对模拟光斑图像和哈特曼图像进行互相关求取网格最佳位置。该方法无需人工干预,耗时短,实现了网格实时自动划分。     

Non-invasive and low-artifact in vivo brain imaging by using a scanning acoustic-photoacoustic dual mode microscopy

Photoacoustic imaging is a potential candidate for in vivo brain imaging, whereas, its imaging performance could be degraded by inhomogeneous multi-layered media, consisted of scalp and skull. In this work, we propose a low-artifact photoacoustic microscopy (LAPAM) scheme, which combines conventional acoustic-resolution photoacoustic microscopy with scanning acoustic microscopy to suppress the reflection artifacts induced by multi-layers. Based on similar propagation characteristics of photoacoustic signals and ultrasonic echoes, the ultrasonic echoes can be employed as the filters to suppress the reflection artifacts to obtain low-artifact photoacoustic images. Phantom experiment is used to validate the effectiveness of this method. Furthermore, LAPAM is applied for in-vivo imaging mouse brain without removing the scalp and the skull. Experimental results show that the proposed method successfully achieves the low-artifact brain image, which demonstrates the practical applicability of LAPAM. This work might improve the photoacoustic imaging quality in many biomedical applications which involve tissues with complex acoustic properties, such as brain imaging through scalp and skull.     

纳米碳酸钙作为润滑脂添加剂的摩擦学性能及流变行为研究

使用碳化法制备出三种具有不同粒径的纳米碳酸钙颗粒,利用透射电镜(TEM)和X射线衍射仪(XRD)对其形貌及结构组成进行表征.通过UMT-2摩擦学试验机及RS6000流变仪分别考察了纳米颗粒作为润滑脂添加剂的摩擦学性能及流变学行为,并通过X射线多功能电子能谱仪(XPS)对磨斑表面进行分析.结果表明:所制备的三种纳米颗粒均为方解石结构,可以显著提高基础脂的减摩抗磨性能;添加剂浓度及添加剂尺寸均会影响润滑脂最终的摩擦学性能;在最佳添加浓度和尺寸条件下,能够同时获得最佳的抗磨减摩性能;过高的添加剂浓度会影响润滑脂的结构稳定性,进而影响其摩擦学性能;三种纳米添加剂在磨斑表面形成以碳酸钙为主要成分的润滑膜,纳米颗粒物理性质的差异可能导致其摩擦学性能的差异.