HArF和HNO二聚体相互作用氢键的理论研究

用二阶微扰理论结合6-311+G**、6-311++G**和6-311++G(2d,2p)基组对氢键相互作用二聚体HNO···HArF进行研究．在MP2/6-311+G**、MP2/6-311++G**和MP2/6-311++G(2d,2p)水平上，利用标准方法和均衡校正方法对二聚体进行了几何优化、振动频率和相互作用能的计算．对于相互作用能采用G2MP2方法计算．计算结果表明存在两种稳定的二聚体HNO···HArF结构，在这两种结构中，Dimer I(H···F)比Dimer II(H···O)更加稳定．通过振动频率的计算表明，在Dimer I(H···F)中存在N-H···F蓝移氢键，在DimerII(H···O)中存在Ar-H···O红移氢键，并对蓝移氢键加以确认．利用电子密度拓扑学分析和自然键轨道分析对于氢键红移和蓝移进行了合理解释．     

基于谐振结构的左右手传输线的奇异传输性质

通过对一种具有谐振结构的左右手传输线进行了数值仿真和分析，从有效磁导率和介电常数及色散关系来说明其奇异的传输特性.把这种左右手传输线用作漏波天线并测量了在不同频率点的方向图，从而实验上验证了这种特殊结构在不同的频率范围内可以实现一个左手性通带，也可以实现两个左手性通带.对这种结构传输特性的研究，有助于其在漏波天线方面的应用.     

激光溅射金属等离子体与醇类分子束反应的研究：产物离子对分子束状态的依赖性

The gas phase reactions of metal plasma with alcohol clusters were studied by time of flight mass spectrometry （TOFMS） using laser ablation-molecular beam （LAMB） method. The significant dependence of the product cluster ions on the molecular beam conditions was observed. When the plasma acted on the low density parts of the pulsed molecular beam, the metal-alcohol complexes M^＋An （M=Cu, Al, Mg, Ni and A=C2H5OH, CH3OH） were the dominant products, and the sizes of product ion clusters were smaller. While the plasma acted on the high density part of the beam, however, the main products turned to be protonated alcohol clusters H^＋An and, as the reactions of plasma with methanol were concerned, the protonated water-methanol complexes H3O^＋（CH3OH）n with a larger size （n≤12 for ethanol and n≤24 for methanol）. Similarly, as the pressure of the carrier helium gas was varied from 1 × 10^5 to 5 × 10^5 Pa, the main products were changed from M^＋An to H^＋An and the sizes of the clusters also increased. The changes in the product clusters were attributed to the different formation mechanism of the output ions, that is, the M^＋An ions came from the reaction of metal ion with alcohol clusters, while H^＋An mainly from collisional reaction of electron with alcohol clusters.     

多光子电离伴随的碎片化过程的速率方程分析

提出一个描述多原子分子多光子激发、电离和离子再被激发过程的布局速率方程模型，并且得到电离效率和离子体系吸收的平均能量＜E＞的代数解．通过计算这两个量与光强的关系，分析了不同电离机制下，多原子分子多光子电离实验中伴随的碎片化过程的控制性问题．结果表明只有采用1＋1电离方案，可以通过控制电离激光的强度来实现“软电离”和“硬解离”．采用3＋1电离，即使在单离子条件下，离子的＜E＞已高达20－30eV，远超过离子的解离阈值，特别是增加光强时，＜E＞的增加速度比电离效率增加得快，因此一般条件下不能让分子有效电离而不使其离子解离．上面的分析可以圆满解释呋喃等分子在3＋1电离时观察不到母体离子这个实验事实．     

银(110)表面苝有序薄膜电子态的研究

运用紫外光电子能谱(UPS)和低能电子衍射(LEED)技术,对银(110)表面上有机分子苝（perylene）的生长进行了研究.有机分子价带的4个特征峰分别位于费米能级以下3.5、4.8、6.4和8.5 eV处.当有机薄膜约为单分子层(厚度为0.3 nm)时, 苝在银(110)表面上形成C(6×2)的有序结构.角分辨紫外光电子能谱(ARUSP)的测量显示:在界面处的苝分子平面平行于衬底.苝在银(110)表面稳定性很高,随着对衬底加热，有机材料发生脱附,在140 ℃以下没有观察到分解现象.     

CO在Cs/Ru(1010)表面上吸附的ARUPS研究

CO adsorption on Ru(100) and Cs/Ru(10O) surfaces has been investigated using ARUPS, at low temperature 150K. The 5σ+1π and 4σ levels of CO molecule were　found in angle-rcsolved UP spectra showing that CO is in molecular adsorption states on clean and Cs precovercd Ru(1010). The dependence of CO 4σ intensity on incident angle suggests that adsorbed CO stands upright on clean Ru(1010) surface; But adsorbed CO, with a short-range interaction with Cs atom [15], does not stand upright and tilts in <1210> azimuth on a Cs-precovered Ru(1010) surface.     

Hydrogen Bonding Interaction of Formic Acid-, Formaldehyde-, Formylfluoride-Nitrosyl Hydride： Theoretical Study on the Geometries, Interaction Energies and Blue- or Red-Shifted Hydrogen Bonds

The hydrogen bonding interaction of formic acid-, formaldehyde-, formylfluoride-nitrosyl hydride complexes was investigated by the density functional theory （DFT） and ab inito method in conjunction with 6-311＋＋G（2d,2p） basis set. The geometries, vibrational frequencies and interaction energies of the complexes were calculated by both standard and CP-corrected methods respectively. Moreover, G3B3 method was employed to estimate the interaction energies. There are C--H…O, N--H…O, N--H…F blue-shifted H-bonds and red-shifted O----H…O H-bond in the complexes. Electron density redistribution and rehybridization contribute to the N--H and C--H blue shifts. All geometric reorganizations contribute to the N--H blue shifts and partial geometric reorganizations contribute to the C--H blue shifts. The geometric reorganizations of the complex C except ZH（5）-O（4）-C（1） contribute to the O----H red shift. For the N--H blue shifts, the effect of r（N--O） variation on the N--H blue shifts is larger than that of ZH-N-O variation. Rehybridization plays a dominant role in the degree of N--H blue shifts, whereas the electron density redistribution contributes more to the degree of C--H blue shifts than the other effects do.     

CF4/Ar微波放电与CS2反应的可见化学发光研究

利用交叉分子束-化学发光研究方法,研究了气相条件下不同反应压力时CF4／Ar微波放电的产物与二硫化碳CS的交叉反应在可见区(300～900nm)的化学发光,利用密度泛函B3LYP和二阶微扰MP2理论分别在6-311 G(3df,2pd)和6-311 G(d,p)基组下计算了可能的反应产物电子基态的构型和振动频率,将得到的光谱标识为F2S2电子激发态的发射谱,通过对光谱和产物的分析,认为微波放电得到的亚稳态的Ar原子与CS发生碰撞反应使CS解离为S原子和CS,解离得到的S原子与微波放电产生的F原子发生多步反应得到了F2S2的激发态。     

一套产生瞬态物种的脉冲放电及其光谱探测的分子束装置

建立了一套用于产生瞬变物种的脉冲高压放电分子束装置 ,以 N2 气为例 ,对高压脉冲放电过程和整个荧光采集系统的工作效率进行了研究 ,从 N2 气的振动光谱中得到其激发态的振动温度为 2 2 5 7K。     

3D打印技术在严重骨盆髋臼骨折内固定手术中的应用

通过采集严重骨盆髋臼骨折患者的薄层CT扫描数据, 在Mimics中进行图像编辑、三维重建及分析总结, 探讨3D打印技术在严重骨盆髋臼骨折内固定手术中的应用. 结果表明, 3D打印技术有利于术前进行手术设计、术前预弯钢板, 有利于判断畸形及术中在确定截骨部位、复位的关键标记以及判断复位质量. 3D打印技术具有快速性、高仿真性、高成功率及通用性意义, 具有推广价值.