微腔有机电致发光器件的角度依赖性

设计并制作了两个器件,一个是微腔有机电致发光器件(MOLED):G/DBR/ITO/NPB(46 nm)/DPVBi(20 nm)/Alq₃(56 nm)/LiF(1 nm)/Al(150 nm);一个是无腔器件(OLED):G/ITO/NPB(46 nm)/DPVBi(20 nm)/Alq₃(56 nm)/LiF(1 nm)/Al(150 nm)。测试并分析了器件性能。OLED在电流密度30 mA/cm²时的电致发光(EL)光谱随观测角度由0°~70°都是一宽谱带,是发光层DPVBi的特征发光谱,峰值都在452 nm处,半峰全宽均为70 nm,色坐标均为(x=0.18,y=0.19),无腔器件没有角度依赖性。相同电流密度下,微腔器件的EL谱随观测角度由0°~70°,发光峰值蓝移,由472 nm逐渐移至428 nm;峰值相对强度渐弱,由0.32变至0.02;半峰全宽由14 nm增加至120 nm;色坐标由(x=0.14,y=0.10)变至(x=0.19,y=0.25),颜色由紫蓝变成蓝白到接近白色。微腔器件具有明显的角度依赖性。     

CP asymmetries in Strange Baryon Decays

While indirect and direct C P violation(CPV) has been established in the decays of strange and beauty mesons, no CPV has yet been found for baryons. There are different paths to finding C P asymmetry in the decays of strange baryons; they are all highly non-trivial. The Hyper CP Collaboration has probed CPV in the decays of singleΞ and Λ [1]. We discuss future lessons from e~+e~-collisions at BESⅢ/BEPCⅡ: probing decays of pairs of strange baryons, namely Λ, Σ and ■. Realistic goals are to learn about non-perturbative QCD. One can hope to find CPV in the decays of strange baryons; one can also dream of finding the impact of New Dynamics. We point out that an important new era will start with the BESIII/BEPCII data accumulated by the end of 2018. This also supports new ideas to trigger J/ψ→■Λ at the LHCb collaboration.     

基于多孔黑色TiO_2涂层隔膜的锂硫电池性能探究

合成了多孔黑色二氧化钛(PB-TiO_2),并将其作为原料制备得到PB-TiO_2涂层隔膜(PB-TiO_2@PP),研究了隔膜对锂硫电池电化学性能的影响.电化学性能测试表明,PBTiO_2@PP隔膜能够大幅度提高电池的比容量、有效改善电池的倍率性能和循环稳定性.在1C倍率下,放电容量能够保持在882mAh/g.100次循环之后,容量仍能保持在780mAh/g,容量保持率接近90%.     

新法合成FOX-7

FOX-7是一种综合性能优异的新型高能低感炸药。文中通过研究以下路线并优化反应条件，来扩大合成的规模，便于进行批量生产FOX-7。先通过硝硫混酸硝化2-甲基-4，6-二羟基嘧啶形成相应的中间体；接着将反应液倒入水中，中间体水解开环即得目标产物FOX-7（结晶析出）和副产物二硝基甲烷（浅黄色油状物质）。     

Partial wave analysis of ψ＇ →γχc0→γpK-Λ used for searching for baryon resonance

Abundant ψ＇ events have been collected at the Beijing Electron Positron Collider-Ⅱ （BEPCⅡ） that could undoubtedly provide us with a great opportunity to study the more attractive charmonium decays. As has been noticed before, in the process of J/ψ＇ decaying to the baryonic final states, pK-Λ, the evident Λ＊ and N＊ bands have been observed. Similarly, by using the product of χcJ from ψ＇ radiative decay, we may confirm this or find some extra new resonances. χc0＇s data samples will be more than χc1,2, taking into account the larger branching ratio of ψ＇ →γχc0. Here, we provide explicit partial wave analysis formulae for the very interesting channel ψ＇ →γχc0 →γpK-Λ.     

Multi-quasiparticle excitations and the impact of the high-j intruder orbital intheN=5193Mo nucleus

The level structures of 93 Mo are investigated using Large Scale Shell Model calculations,and reasonable agreement is obtained between the experimental and calculated values.The calculated results show that the lower-lying states are mainly dominated by proton excitations from the If5/2,2 p3/2,and 2 p1/2 orbitals into the higher orbitals across the Z=38 or Z=40 subshell closure.For the higher-spin states,multi-particle excitations,including the excitation of 2 d5/2 neutrons across the N=56 subshell closure into the high-j intruder 1 h11/2 orbital,are essential.Moreover,the previously unknown spin-parity assignments of the six higher excited states in 93 Mo are inferred from the shell model calculations.     

CSNS/RCS脉冲电源均匀传输线障碍点分析

通过研究均匀传输线特征阻抗失配原理,发现传输电缆特征阻抗失配会导致负载终端励磁电流幅值发生畸变。对电源主电路关键参数进行分析,发现均匀传输线匹配阻抗失配会造成磁铁处励磁电流幅值变小,上升时间变短。建立均匀传输线障碍点等效模型,推导出脉冲电源传输线障碍点处反射系数,对串联电阻和并联电阻障碍点深入分析,发现传输线特征阻抗失配,会导致匹配负载处有功功率减小。最后通过高压电缆被击穿故障使其得以验证。     

126I高自旋态的认定

利用重离子融合蒸发反应¹²²Sn(¹¹B,5n2p)布居了双奇核¹²⁶I的激发态,首次建立了具有集体带结构特征的能级纲图,其中包括20条新γ跃迁.所建能级纲图的核素归属指定得到了核反应¹²⁴Sn(⁷Li,5n)的交叉支持.简单讨论了所建带结构的可能组态.     

CSNS/RCS引出脉冲电源传输电缆终端绝缘技术

对脉冲电源系统72 h老练实验过程中高压电缆座打火并被击穿情况进行分析,建立高压电缆终端电场分布等效电路,推导出从电缆终端到金属屏蔽层的电势差公式,从理论上分析高压座被击穿的原因是电缆终端绝缘层未做倒角,空间电荷在此处集聚、温度升高导致的。通过定位被击穿高压座击穿孔的位置验证理论分析的正确性,最后提出高压电缆端部绝缘层处理方法,并做72 h老练实验验证了其正确性。     

强流质子加速器ns级快沿切束电源系统

详细分析了中国散裂中子源(CSNS)直线加速器低能端预切束电源工作原理。切束束团上升沿和下降沿的快慢是衡量切束电源性能好坏的重要指标,经过研究,研制了一台脉冲幅值6 kV,前后沿纳秒级的切束腔电源,应用纯硬件电路代替软件的方法实现高频和低频定时信号的同步和与处理,使该电源输出稳定可靠的高压脉冲。该电源基于直流高压加快速高压开关的设计方案来实现高压、高重复频率及纳秒级快沿的脉冲输出,具有多脉冲和单脉冲两种工作模式,满足了直线加速器单束团和多束团注入到快循环质子同步加速器(RCS)的要求。CSNS直线加速器切束实验的结果表明,切束电源满足各项设计指标要求。